projects/linux·blob master · refs

345 lines · 9.1 KiB

1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Qualcomm Ramp Controller driver
4 * Copyright (c) 2022, AngeloGioacchino Del Regno
5 * <[email protected]>
6 */
7
8#include <linux/bitfield.h>
9#include <linux/kernel.h>
10#include <linux/module.h>
11#include <linux/of.h>
12#include <linux/of_platform.h>
13#include <linux/platform_device.h>
14#include <linux/regmap.h>
15#include <linux/types.h>
16
17#define RC_UPDATE_EN BIT(0)
18#define RC_ROOT_EN BIT(1)
19
20#define RC_REG_CFG_UPDATE 0x60
21#define RC_CFG_UPDATE_EN BIT(8)
22#define RC_CFG_ACK GENMASK(31, 16)
23
24#define RC_DCVS_CFG_SID 2
25#define RC_LINK_SID 3
26#define RC_LMH_SID 6
27#define RC_DFS_SID 14
28
29#define RC_UPDATE_TIMEOUT_US 500
30
31/**
32 * struct qcom_ramp_controller_desc - SoC specific parameters
33 * @cfg_dfs_sid: Dynamic Frequency Scaling SID configuration
34 * @cfg_link_sid: Link SID configuration
35 * @cfg_lmh_sid: Limits Management hardware SID configuration
36 * @cfg_ramp_en: Ramp Controller enable sequence
37 * @cfg_ramp_dis: Ramp Controller disable sequence
38 * @cmd_reg: Command register offset
39 * @num_dfs_sids: Number of DFS SIDs (max 8)
40 * @num_link_sids: Number of Link SIDs (max 3)
41 * @num_lmh_sids: Number of LMh SIDs (max 8)
42 * @num_ramp_en: Number of entries in enable sequence
43 * @num_ramp_dis: Number of entries in disable sequence
44 */
45struct qcom_ramp_controller_desc {
46 const struct reg_sequence *cfg_dfs_sid;
47 const struct reg_sequence *cfg_link_sid;
48 const struct reg_sequence *cfg_lmh_sid;
49 const struct reg_sequence *cfg_ramp_en;
50 const struct reg_sequence *cfg_ramp_dis;
51 u8 cmd_reg;
52 u8 num_dfs_sids;
53 u8 num_link_sids;
54 u8 num_lmh_sids;
55 u8 num_ramp_en;
56 u8 num_ramp_dis;
57};
58
59/**
60 * struct qcom_ramp_controller - Main driver structure
61 * @regmap: Regmap handle
62 * @desc: SoC specific parameters
63 */
64struct qcom_ramp_controller {
65 struct regmap *regmap;
66 const struct qcom_ramp_controller_desc *desc;
67};
68
69/**
70 * rc_wait_for_update() - Wait for Ramp Controller root update
71 * @qrc: Main driver structure
72 *
73 * Return: Zero for success or negative number for failure
74 */
75static int rc_wait_for_update(struct qcom_ramp_controller *qrc)
76{
77 const struct qcom_ramp_controller_desc *d = qrc->desc;
78 struct regmap *r = qrc->regmap;
79 u32 val;
80 int ret;
81
82 ret = regmap_set_bits(r, d->cmd_reg, RC_ROOT_EN);
83 if (ret)
84 return ret;
85
86 return regmap_read_poll_timeout(r, d->cmd_reg, val, !(val & RC_UPDATE_EN),
87 1, RC_UPDATE_TIMEOUT_US);
88}
89
90/**
91 * rc_set_cfg_update() - Ramp Controller configuration update
92 * @qrc: Main driver structure
93 * @ce: Configuration entry to update
94 *
95 * Return: Zero for success or negative number for failure
96 */
97static int rc_set_cfg_update(struct qcom_ramp_controller *qrc, u8 ce)
98{
99 const struct qcom_ramp_controller_desc *d = qrc->desc;
100 struct regmap *r = qrc->regmap;
101 u32 ack, val;
102 int ret;
103
104 /* The ack bit is between bits 16-31 of RC_REG_CFG_UPDATE */
105 ack = FIELD_PREP(RC_CFG_ACK, BIT(ce));
106
107 /* Write the configuration type first... */
108 ret = regmap_set_bits(r, d->cmd_reg + RC_REG_CFG_UPDATE, ce);
109 if (ret)
110 return ret;
111
112 /* ...and after that, enable the update bit to sync the changes */
113 ret = regmap_set_bits(r, d->cmd_reg + RC_REG_CFG_UPDATE, RC_CFG_UPDATE_EN);
114 if (ret)
115 return ret;
116
117 /* Wait for the changes to go through */
118 ret = regmap_read_poll_timeout(r, d->cmd_reg + RC_REG_CFG_UPDATE, val,
119 val & ack, 1, RC_UPDATE_TIMEOUT_US);
120 if (ret)
121 return ret;
122
123 /*
124 * Configuration update success! The CFG_UPDATE register will not be
125 * cleared automatically upon applying the configuration, so we have
126 * to do that manually in order to leave the ramp controller in a
127 * predictable and clean state.
128 */
129 ret = regmap_write(r, d->cmd_reg + RC_REG_CFG_UPDATE, 0);
130 if (ret)
131 return ret;
132
133 /* Wait for the update bit cleared ack */
134 return regmap_read_poll_timeout(r, d->cmd_reg + RC_REG_CFG_UPDATE,
135 val, !(val & RC_CFG_ACK), 1,
136 RC_UPDATE_TIMEOUT_US);
137}
138
139/**
140 * rc_write_cfg - Send configuration sequence
141 * @qrc: Main driver structure
142 * @seq: Register sequence to send before asking for update
143 * @ce: Configuration SID
144 * @nsids: Total number of SIDs
145 *
146 * Returns: Zero for success or negative number for error
147 */
148static int rc_write_cfg(struct qcom_ramp_controller *qrc,
149 const struct reg_sequence *seq,
150 u16 ce, u8 nsids)
151{
152 int ret;
153 u8 i;
154
155 /* Check if, and wait until the ramp controller is ready */
156 ret = rc_wait_for_update(qrc);
157 if (ret)
158 return ret;
159
160 /* Write the sequence */
161 ret = regmap_multi_reg_write(qrc->regmap, seq, nsids);
162 if (ret)
163 return ret;
164
165 /* Pull the trigger: do config update starting from the last sid */
166 for (i = 0; i < nsids; i++) {
167 ret = rc_set_cfg_update(qrc, (u8)ce - i);
168 if (ret)
169 return ret;
170 }
171
172 return 0;
173}
174
175/**
176 * rc_ramp_ctrl_enable() - Enable Ramp up/down Control
177 * @qrc: Main driver structure
178 *
179 * Return: Zero for success or negative number for error
180 */
181static int rc_ramp_ctrl_enable(struct qcom_ramp_controller *qrc)
182{
183 const struct qcom_ramp_controller_desc *d = qrc->desc;
184 int i, ret;
185
186 for (i = 0; i < d->num_ramp_en; i++) {
187 ret = rc_write_cfg(qrc, &d->cfg_ramp_en[i], RC_DCVS_CFG_SID, 1);
188 if (ret)
189 return ret;
190 }
191
192 return 0;
193}
194
195/**
196 * qcom_ramp_controller_start() - Initialize and start the ramp controller
197 * @qrc: Main driver structure
198 *
199 * The Ramp Controller needs to be initialized by programming the relevant
200 * registers with SoC-specific configuration: once programming is done,
201 * the hardware will take care of the rest (no further handling required).
202 *
203 * Return: Zero for success or negative number for error
204 */
205static int qcom_ramp_controller_start(struct qcom_ramp_controller *qrc)
206{
207 const struct qcom_ramp_controller_desc *d = qrc->desc;
208 int ret;
209
210 /* Program LMH, DFS, Link SIDs */
211 ret = rc_write_cfg(qrc, d->cfg_lmh_sid, RC_LMH_SID, d->num_lmh_sids);
212 if (ret)
213 return ret;
214
215 ret = rc_write_cfg(qrc, d->cfg_dfs_sid, RC_DFS_SID, d->num_dfs_sids);
216 if (ret)
217 return ret;
218
219 ret = rc_write_cfg(qrc, d->cfg_link_sid, RC_LINK_SID, d->num_link_sids);
220 if (ret)
221 return ret;
222
223 /* Everything is ready! Enable the ramp up/down control */
224 return rc_ramp_ctrl_enable(qrc);
225}
226
227static const struct regmap_config qrc_regmap_config = {
228 .reg_bits = 32,
229 .reg_stride = 4,
230 .val_bits = 32,
231 .max_register = 0x68,
232};
233
234static const struct reg_sequence msm8976_cfg_dfs_sid[] = {
235 { 0x10, 0xfefebff7 },
236 { 0x14, 0xfdff7fef },
237 { 0x18, 0xfbffdefb },
238 { 0x1c, 0xb69b5555 },
239 { 0x20, 0x24929249 },
240 { 0x24, 0x49241112 },
241 { 0x28, 0x11112111 },
242 { 0x2c, 0x8102 }
243};
244
245static const struct reg_sequence msm8976_cfg_link_sid[] = {
246 { 0x40, 0xfc987 }
247};
248
249static const struct reg_sequence msm8976_cfg_lmh_sid[] = {
250 { 0x30, 0x77706db },
251 { 0x34, 0x5550249 },
252 { 0x38, 0x111 }
253};
254
255static const struct reg_sequence msm8976_cfg_ramp_en[] = {
256 { 0x50, 0x800 }, /* pre_en */
257 { 0x50, 0xc00 }, /* en */
258 { 0x50, 0x400 } /* post_en */
259};
260
261static const struct reg_sequence msm8976_cfg_ramp_dis[] = {
262 { 0x50, 0x0 }
263};
264
265static const struct qcom_ramp_controller_desc msm8976_rc_cfg = {
266 .cfg_dfs_sid = msm8976_cfg_dfs_sid,
267 .num_dfs_sids = ARRAY_SIZE(msm8976_cfg_dfs_sid),
268
269 .cfg_link_sid = msm8976_cfg_link_sid,
270 .num_link_sids = ARRAY_SIZE(msm8976_cfg_link_sid),
271
272 .cfg_lmh_sid = msm8976_cfg_lmh_sid,
273 .num_lmh_sids = ARRAY_SIZE(msm8976_cfg_lmh_sid),
274
275 .cfg_ramp_en = msm8976_cfg_ramp_en,
276 .num_ramp_en = ARRAY_SIZE(msm8976_cfg_ramp_en),
277
278 .cfg_ramp_dis = msm8976_cfg_ramp_dis,
279 .num_ramp_dis = ARRAY_SIZE(msm8976_cfg_ramp_dis),
280
281 .cmd_reg = 0x0,
282};
283
284static int qcom_ramp_controller_probe(struct platform_device *pdev)
285{
286 struct qcom_ramp_controller *qrc;
287 void __iomem *base;
288
289 base = devm_platform_ioremap_resource(pdev, 0);
290 if (IS_ERR(base))
291 return PTR_ERR(base);
292
293 qrc = devm_kmalloc(&pdev->dev, sizeof(*qrc), GFP_KERNEL);
294 if (!qrc)
295 return -ENOMEM;
296
297 qrc->desc = device_get_match_data(&pdev->dev);
298 if (!qrc->desc)
299 return -EINVAL;
300
301 qrc->regmap = devm_regmap_init_mmio(&pdev->dev, base, &qrc_regmap_config);
302 if (IS_ERR(qrc->regmap))
303 return PTR_ERR(qrc->regmap);
304
305 platform_set_drvdata(pdev, qrc);
306
307 return qcom_ramp_controller_start(qrc);
308}
309
310static void qcom_ramp_controller_remove(struct platform_device *pdev)
311{
312 struct qcom_ramp_controller *qrc = platform_get_drvdata(pdev);
313 int ret;
314
315 ret = rc_write_cfg(qrc, qrc->desc->cfg_ramp_dis,
316 RC_DCVS_CFG_SID, qrc->desc->num_ramp_dis);
317 if (ret)
318 dev_err(&pdev->dev, "Failed to send disable sequence\n");
319}
320
321static const struct of_device_id qcom_ramp_controller_match_table[] = {
322 { .compatible = "qcom,msm8976-ramp-controller", .data = &msm8976_rc_cfg },
323 { /* sentinel */ }
324};
325MODULE_DEVICE_TABLE(of, qcom_ramp_controller_match_table);
326
327static struct platform_driver qcom_ramp_controller_driver = {
328 .driver = {
329 .name = "qcom-ramp-controller",
330 .of_match_table = qcom_ramp_controller_match_table,
331 .suppress_bind_attrs = true,
332 },
333 .probe = qcom_ramp_controller_probe,
334 .remove = qcom_ramp_controller_remove,
335};
336
337static int __init qcom_ramp_controller_init(void)
338{
339 return platform_driver_register(&qcom_ramp_controller_driver);
340}
341arch_initcall(qcom_ramp_controller_init);
342
343MODULE_AUTHOR("AngeloGioacchino Del Regno <[email protected]>");
344MODULE_DESCRIPTION("Qualcomm Ramp Controller driver");
345MODULE_LICENSE("GPL");