projects/linux·blob master · refs

813 lines · 19.8 KiB

1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * RDA8810PL serial device driver
4 *
5 * Copyright RDA Microelectronics Company Limited
6 * Copyright (c) 2017 Andreas Färber
7 * Copyright (c) 2018 Manivannan Sadhasivam
8 */
9
10#include <linux/clk.h>
11#include <linux/console.h>
12#include <linux/delay.h>
13#include <linux/io.h>
14#include <linux/module.h>
15#include <linux/of.h>
16#include <linux/platform_device.h>
17#include <linux/serial.h>
18#include <linux/serial_core.h>
19#include <linux/tty.h>
20#include <linux/tty_flip.h>
21
22#define RDA_UART_PORT_NUM 3
23#define RDA_UART_DEV_NAME "ttyRDA"
24
25#define RDA_UART_CTRL 0x00
26#define RDA_UART_STATUS 0x04
27#define RDA_UART_RXTX_BUFFER 0x08
28#define RDA_UART_IRQ_MASK 0x0c
29#define RDA_UART_IRQ_CAUSE 0x10
30#define RDA_UART_IRQ_TRIGGERS 0x14
31#define RDA_UART_CMD_SET 0x18
32#define RDA_UART_CMD_CLR 0x1c
33
34/* UART_CTRL Bits */
35#define RDA_UART_ENABLE BIT(0)
36#define RDA_UART_DBITS_8 BIT(1)
37#define RDA_UART_TX_SBITS_2 BIT(2)
38#define RDA_UART_PARITY_EN BIT(3)
39#define RDA_UART_PARITY(x) (((x) & 0x3) << 4)
40#define RDA_UART_PARITY_ODD RDA_UART_PARITY(0)
41#define RDA_UART_PARITY_EVEN RDA_UART_PARITY(1)
42#define RDA_UART_PARITY_SPACE RDA_UART_PARITY(2)
43#define RDA_UART_PARITY_MARK RDA_UART_PARITY(3)
44#define RDA_UART_DIV_MODE BIT(20)
45#define RDA_UART_IRDA_EN BIT(21)
46#define RDA_UART_DMA_EN BIT(22)
47#define RDA_UART_FLOW_CNT_EN BIT(23)
48#define RDA_UART_LOOP_BACK_EN BIT(24)
49#define RDA_UART_RX_LOCK_ERR BIT(25)
50#define RDA_UART_RX_BREAK_LEN(x) (((x) & 0xf) << 28)
51
52/* UART_STATUS Bits */
53#define RDA_UART_RX_FIFO(x) (((x) & 0x7f) << 0)
54#define RDA_UART_RX_FIFO_MASK (0x7f << 0)
55#define RDA_UART_TX_FIFO(x) (((x) & 0x1f) << 8)
56#define RDA_UART_TX_FIFO_MASK (0x1f << 8)
57#define RDA_UART_TX_ACTIVE BIT(14)
58#define RDA_UART_RX_ACTIVE BIT(15)
59#define RDA_UART_RX_OVERFLOW_ERR BIT(16)
60#define RDA_UART_TX_OVERFLOW_ERR BIT(17)
61#define RDA_UART_RX_PARITY_ERR BIT(18)
62#define RDA_UART_RX_FRAMING_ERR BIT(19)
63#define RDA_UART_RX_BREAK_INT BIT(20)
64#define RDA_UART_DCTS BIT(24)
65#define RDA_UART_CTS BIT(25)
66#define RDA_UART_DTR BIT(28)
67#define RDA_UART_CLK_ENABLED BIT(31)
68
69/* UART_RXTX_BUFFER Bits */
70#define RDA_UART_RX_DATA(x) (((x) & 0xff) << 0)
71#define RDA_UART_TX_DATA(x) (((x) & 0xff) << 0)
72
73/* UART_IRQ_MASK Bits */
74#define RDA_UART_TX_MODEM_STATUS BIT(0)
75#define RDA_UART_RX_DATA_AVAILABLE BIT(1)
76#define RDA_UART_TX_DATA_NEEDED BIT(2)
77#define RDA_UART_RX_TIMEOUT BIT(3)
78#define RDA_UART_RX_LINE_ERR BIT(4)
79#define RDA_UART_TX_DMA_DONE BIT(5)
80#define RDA_UART_RX_DMA_DONE BIT(6)
81#define RDA_UART_RX_DMA_TIMEOUT BIT(7)
82#define RDA_UART_DTR_RISE BIT(8)
83#define RDA_UART_DTR_FALL BIT(9)
84
85/* UART_IRQ_CAUSE Bits */
86#define RDA_UART_TX_MODEM_STATUS_U BIT(16)
87#define RDA_UART_RX_DATA_AVAILABLE_U BIT(17)
88#define RDA_UART_TX_DATA_NEEDED_U BIT(18)
89#define RDA_UART_RX_TIMEOUT_U BIT(19)
90#define RDA_UART_RX_LINE_ERR_U BIT(20)
91#define RDA_UART_TX_DMA_DONE_U BIT(21)
92#define RDA_UART_RX_DMA_DONE_U BIT(22)
93#define RDA_UART_RX_DMA_TIMEOUT_U BIT(23)
94#define RDA_UART_DTR_RISE_U BIT(24)
95#define RDA_UART_DTR_FALL_U BIT(25)
96
97/* UART_TRIGGERS Bits */
98#define RDA_UART_RX_TRIGGER(x) (((x) & 0x1f) << 0)
99#define RDA_UART_TX_TRIGGER(x) (((x) & 0xf) << 8)
100#define RDA_UART_AFC_LEVEL(x) (((x) & 0x1f) << 16)
101
102/* UART_CMD_SET Bits */
103#define RDA_UART_RI BIT(0)
104#define RDA_UART_DCD BIT(1)
105#define RDA_UART_DSR BIT(2)
106#define RDA_UART_TX_BREAK_CONTROL BIT(3)
107#define RDA_UART_TX_FINISH_N_WAIT BIT(4)
108#define RDA_UART_RTS BIT(5)
109#define RDA_UART_RX_FIFO_RESET BIT(6)
110#define RDA_UART_TX_FIFO_RESET BIT(7)
111
112#define RDA_UART_TX_FIFO_SIZE 16
113
114static struct uart_driver rda_uart_driver;
115
116struct rda_uart_port {
117 struct uart_port port;
118 struct clk *clk;
119};
120
121#define to_rda_uart_port(port) container_of(port, struct rda_uart_port, port)
122
123static struct rda_uart_port *rda_uart_ports[RDA_UART_PORT_NUM];
124
125static inline void rda_uart_write(struct uart_port *port, u32 val,
126 unsigned int off)
127{
128 writel(val, port->membase + off);
129}
130
131static inline u32 rda_uart_read(struct uart_port *port, unsigned int off)
132{
133 return readl(port->membase + off);
134}
135
136static unsigned int rda_uart_tx_empty(struct uart_port *port)
137{
138 unsigned long flags;
139 unsigned int ret;
140 u32 val;
141
142 uart_port_lock_irqsave(port, &flags);
143
144 val = rda_uart_read(port, RDA_UART_STATUS);
145 ret = (val & RDA_UART_TX_FIFO_MASK) ? TIOCSER_TEMT : 0;
146
147 uart_port_unlock_irqrestore(port, flags);
148
149 return ret;
150}
151
152static unsigned int rda_uart_get_mctrl(struct uart_port *port)
153{
154 unsigned int mctrl = 0;
155 u32 cmd_set, status;
156
157 cmd_set = rda_uart_read(port, RDA_UART_CMD_SET);
158 status = rda_uart_read(port, RDA_UART_STATUS);
159 if (cmd_set & RDA_UART_RTS)
160 mctrl |= TIOCM_RTS;
161 if (!(status & RDA_UART_CTS))
162 mctrl |= TIOCM_CTS;
163
164 return mctrl;
165}
166
167static void rda_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
168{
169 u32 val;
170
171 if (mctrl & TIOCM_RTS) {
172 val = rda_uart_read(port, RDA_UART_CMD_SET);
173 rda_uart_write(port, (val | RDA_UART_RTS), RDA_UART_CMD_SET);
174 } else {
175 /* Clear RTS to stop to receive. */
176 val = rda_uart_read(port, RDA_UART_CMD_CLR);
177 rda_uart_write(port, (val | RDA_UART_RTS), RDA_UART_CMD_CLR);
178 }
179
180 val = rda_uart_read(port, RDA_UART_CTRL);
181
182 if (mctrl & TIOCM_LOOP)
183 val |= RDA_UART_LOOP_BACK_EN;
184 else
185 val &= ~RDA_UART_LOOP_BACK_EN;
186
187 rda_uart_write(port, val, RDA_UART_CTRL);
188}
189
190static void rda_uart_stop_tx(struct uart_port *port)
191{
192 u32 val;
193
194 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
195 val &= ~RDA_UART_TX_DATA_NEEDED;
196 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
197
198 val = rda_uart_read(port, RDA_UART_CMD_SET);
199 val |= RDA_UART_TX_FIFO_RESET;
200 rda_uart_write(port, val, RDA_UART_CMD_SET);
201}
202
203static void rda_uart_stop_rx(struct uart_port *port)
204{
205 u32 val;
206
207 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
208 val &= ~(RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT);
209 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
210
211 /* Read Rx buffer before reset to avoid Rx timeout interrupt */
212 val = rda_uart_read(port, RDA_UART_RXTX_BUFFER);
213
214 val = rda_uart_read(port, RDA_UART_CMD_SET);
215 val |= RDA_UART_RX_FIFO_RESET;
216 rda_uart_write(port, val, RDA_UART_CMD_SET);
217}
218
219static void rda_uart_start_tx(struct uart_port *port)
220{
221 u32 val;
222
223 if (uart_tx_stopped(port)) {
224 rda_uart_stop_tx(port);
225 return;
226 }
227
228 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
229 val |= RDA_UART_TX_DATA_NEEDED;
230 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
231}
232
233static void rda_uart_change_baudrate(struct rda_uart_port *rda_port,
234 unsigned long baud)
235{
236 clk_set_rate(rda_port->clk, baud * 8);
237}
238
239static void rda_uart_set_termios(struct uart_port *port,
240 struct ktermios *termios,
241 const struct ktermios *old)
242{
243 struct rda_uart_port *rda_port = to_rda_uart_port(port);
244 unsigned long flags;
245 unsigned int ctrl, cmd_set, cmd_clr, triggers;
246 unsigned int baud;
247 u32 irq_mask;
248
249 uart_port_lock_irqsave(port, &flags);
250
251 baud = uart_get_baud_rate(port, termios, old, 9600, port->uartclk / 4);
252 rda_uart_change_baudrate(rda_port, baud);
253
254 ctrl = rda_uart_read(port, RDA_UART_CTRL);
255 cmd_set = rda_uart_read(port, RDA_UART_CMD_SET);
256 cmd_clr = rda_uart_read(port, RDA_UART_CMD_CLR);
257
258 switch (termios->c_cflag & CSIZE) {
259 case CS5:
260 case CS6:
261 dev_warn(port->dev, "bit size not supported, using 7 bits\n");
262 fallthrough;
263 case CS7:
264 ctrl &= ~RDA_UART_DBITS_8;
265 termios->c_cflag &= ~CSIZE;
266 termios->c_cflag |= CS7;
267 break;
268 default:
269 ctrl |= RDA_UART_DBITS_8;
270 break;
271 }
272
273 /* stop bits */
274 if (termios->c_cflag & CSTOPB)
275 ctrl |= RDA_UART_TX_SBITS_2;
276 else
277 ctrl &= ~RDA_UART_TX_SBITS_2;
278
279 /* parity check */
280 if (termios->c_cflag & PARENB) {
281 ctrl |= RDA_UART_PARITY_EN;
282
283 /* Mark or Space parity */
284 if (termios->c_cflag & CMSPAR) {
285 if (termios->c_cflag & PARODD)
286 ctrl |= RDA_UART_PARITY_MARK;
287 else
288 ctrl |= RDA_UART_PARITY_SPACE;
289 } else if (termios->c_cflag & PARODD) {
290 ctrl |= RDA_UART_PARITY_ODD;
291 } else {
292 ctrl |= RDA_UART_PARITY_EVEN;
293 }
294 } else {
295 ctrl &= ~RDA_UART_PARITY_EN;
296 }
297
298 /* Hardware handshake (RTS/CTS) */
299 if (termios->c_cflag & CRTSCTS) {
300 ctrl |= RDA_UART_FLOW_CNT_EN;
301 cmd_set |= RDA_UART_RTS;
302 } else {
303 ctrl &= ~RDA_UART_FLOW_CNT_EN;
304 cmd_clr |= RDA_UART_RTS;
305 }
306
307 ctrl |= RDA_UART_ENABLE;
308 ctrl &= ~RDA_UART_DMA_EN;
309
310 triggers = (RDA_UART_AFC_LEVEL(20) | RDA_UART_RX_TRIGGER(16));
311 irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK);
312 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
313
314 rda_uart_write(port, triggers, RDA_UART_IRQ_TRIGGERS);
315 rda_uart_write(port, ctrl, RDA_UART_CTRL);
316 rda_uart_write(port, cmd_set, RDA_UART_CMD_SET);
317 rda_uart_write(port, cmd_clr, RDA_UART_CMD_CLR);
318
319 rda_uart_write(port, irq_mask, RDA_UART_IRQ_MASK);
320
321 /* Don't rewrite B0 */
322 if (tty_termios_baud_rate(termios))
323 tty_termios_encode_baud_rate(termios, baud, baud);
324
325 /* update the per-port timeout */
326 uart_update_timeout(port, termios->c_cflag, baud);
327
328 uart_port_unlock_irqrestore(port, flags);
329}
330
331static void rda_uart_send_chars(struct uart_port *port)
332{
333 struct tty_port *tport = &port->state->port;
334 unsigned char ch;
335 u32 val;
336
337 if (uart_tx_stopped(port))
338 return;
339
340 if (port->x_char) {
341 while (!(rda_uart_read(port, RDA_UART_STATUS) &
342 RDA_UART_TX_FIFO_MASK))
343 cpu_relax();
344
345 rda_uart_write(port, port->x_char, RDA_UART_RXTX_BUFFER);
346 port->icount.tx++;
347 port->x_char = 0;
348 }
349
350 while ((rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK) &&
351 uart_fifo_get(port, &ch))
352 rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER);
353
354 if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
355 uart_write_wakeup(port);
356
357 if (!kfifo_is_empty(&tport->xmit_fifo)) {
358 /* Re-enable Tx FIFO interrupt */
359 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
360 val |= RDA_UART_TX_DATA_NEEDED;
361 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
362 }
363}
364
365static void rda_uart_receive_chars(struct uart_port *port)
366{
367 u32 status, val;
368
369 status = rda_uart_read(port, RDA_UART_STATUS);
370 while ((status & RDA_UART_RX_FIFO_MASK)) {
371 char flag = TTY_NORMAL;
372
373 if (status & RDA_UART_RX_PARITY_ERR) {
374 port->icount.parity++;
375 flag = TTY_PARITY;
376 }
377
378 if (status & RDA_UART_RX_FRAMING_ERR) {
379 port->icount.frame++;
380 flag = TTY_FRAME;
381 }
382
383 if (status & RDA_UART_RX_OVERFLOW_ERR) {
384 port->icount.overrun++;
385 flag = TTY_OVERRUN;
386 }
387
388 val = rda_uart_read(port, RDA_UART_RXTX_BUFFER);
389 val &= 0xff;
390
391 port->icount.rx++;
392 if (!uart_prepare_sysrq_char(port, val))
393 tty_insert_flip_char(&port->state->port, val, flag);
394
395 status = rda_uart_read(port, RDA_UART_STATUS);
396 }
397
398 tty_flip_buffer_push(&port->state->port);
399}
400
401static irqreturn_t rda_interrupt(int irq, void *dev_id)
402{
403 struct uart_port *port = dev_id;
404 u32 val, irq_mask;
405
406 uart_port_lock(port);
407
408 /* Clear IRQ cause */
409 val = rda_uart_read(port, RDA_UART_IRQ_CAUSE);
410 rda_uart_write(port, val, RDA_UART_IRQ_CAUSE);
411
412 if (val & (RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT))
413 rda_uart_receive_chars(port);
414
415 if (val & (RDA_UART_TX_DATA_NEEDED)) {
416 irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK);
417 irq_mask &= ~RDA_UART_TX_DATA_NEEDED;
418 rda_uart_write(port, irq_mask, RDA_UART_IRQ_MASK);
419
420 rda_uart_send_chars(port);
421 }
422
423 uart_unlock_and_check_sysrq(port);
424
425 return IRQ_HANDLED;
426}
427
428static int rda_uart_startup(struct uart_port *port)
429{
430 unsigned long flags;
431 int ret;
432 u32 val;
433
434 uart_port_lock_irqsave(port, &flags);
435 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
436 uart_port_unlock_irqrestore(port, flags);
437
438 ret = request_irq(port->irq, rda_interrupt, IRQF_NO_SUSPEND,
439 "rda-uart", port);
440 if (ret)
441 return ret;
442
443 uart_port_lock_irqsave(port, &flags);
444
445 val = rda_uart_read(port, RDA_UART_CTRL);
446 val |= RDA_UART_ENABLE;
447 rda_uart_write(port, val, RDA_UART_CTRL);
448
449 /* enable rx interrupt */
450 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
451 val |= (RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT);
452 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
453
454 uart_port_unlock_irqrestore(port, flags);
455
456 return 0;
457}
458
459static void rda_uart_shutdown(struct uart_port *port)
460{
461 unsigned long flags;
462 u32 val;
463
464 uart_port_lock_irqsave(port, &flags);
465
466 rda_uart_stop_tx(port);
467 rda_uart_stop_rx(port);
468
469 val = rda_uart_read(port, RDA_UART_CTRL);
470 val &= ~RDA_UART_ENABLE;
471 rda_uart_write(port, val, RDA_UART_CTRL);
472
473 uart_port_unlock_irqrestore(port, flags);
474}
475
476static const char *rda_uart_type(struct uart_port *port)
477{
478 return (port->type == PORT_RDA) ? "rda-uart" : NULL;
479}
480
481static int rda_uart_request_port(struct uart_port *port)
482{
483 struct platform_device *pdev = to_platform_device(port->dev);
484 struct resource *res;
485
486 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
487 if (!res)
488 return -ENXIO;
489
490 if (!devm_request_mem_region(port->dev, port->mapbase,
491 resource_size(res), dev_name(port->dev)))
492 return -EBUSY;
493
494 if (port->flags & UPF_IOREMAP) {
495 port->membase = devm_ioremap(port->dev, port->mapbase,
496 resource_size(res));
497 if (!port->membase)
498 return -EBUSY;
499 }
500
501 return 0;
502}
503
504static void rda_uart_config_port(struct uart_port *port, int flags)
505{
506 unsigned long irq_flags;
507
508 if (flags & UART_CONFIG_TYPE) {
509 port->type = PORT_RDA;
510 rda_uart_request_port(port);
511 }
512
513 uart_port_lock_irqsave(port, &irq_flags);
514
515 /* Clear mask, so no surprise interrupts. */
516 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
517
518 /* Clear status register */
519 rda_uart_write(port, 0, RDA_UART_STATUS);
520
521 uart_port_unlock_irqrestore(port, irq_flags);
522}
523
524static void rda_uart_release_port(struct uart_port *port)
525{
526 struct platform_device *pdev = to_platform_device(port->dev);
527 struct resource *res;
528
529 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
530 if (!res)
531 return;
532
533 if (port->flags & UPF_IOREMAP) {
534 devm_release_mem_region(port->dev, port->mapbase,
535 resource_size(res));
536 devm_iounmap(port->dev, port->membase);
537 port->membase = NULL;
538 }
539}
540
541static int rda_uart_verify_port(struct uart_port *port,
542 struct serial_struct *ser)
543{
544 if (port->type != PORT_RDA)
545 return -EINVAL;
546
547 if (port->irq != ser->irq)
548 return -EINVAL;
549
550 return 0;
551}
552
553static const struct uart_ops rda_uart_ops = {
554 .tx_empty = rda_uart_tx_empty,
555 .get_mctrl = rda_uart_get_mctrl,
556 .set_mctrl = rda_uart_set_mctrl,
557 .start_tx = rda_uart_start_tx,
558 .stop_tx = rda_uart_stop_tx,
559 .stop_rx = rda_uart_stop_rx,
560 .startup = rda_uart_startup,
561 .shutdown = rda_uart_shutdown,
562 .set_termios = rda_uart_set_termios,
563 .type = rda_uart_type,
564 .request_port = rda_uart_request_port,
565 .release_port = rda_uart_release_port,
566 .config_port = rda_uart_config_port,
567 .verify_port = rda_uart_verify_port,
568};
569
570#ifdef CONFIG_SERIAL_RDA_CONSOLE
571
572static void rda_console_putchar(struct uart_port *port, unsigned char ch)
573{
574 if (!port->membase)
575 return;
576
577 while (!(rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK))
578 cpu_relax();
579
580 rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER);
581}
582
583static void rda_uart_port_write(struct uart_port *port, const char *s,
584 u_int count)
585{
586 u32 old_irq_mask;
587 unsigned long flags;
588 int locked = 1;
589
590 if (oops_in_progress)
591 locked = uart_port_trylock_irqsave(port, &flags);
592 else
593 uart_port_lock_irqsave(port, &flags);
594
595 old_irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK);
596 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
597
598 uart_console_write(port, s, count, rda_console_putchar);
599
600 /* wait until all contents have been sent out */
601 while (!(rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK))
602 cpu_relax();
603
604 rda_uart_write(port, old_irq_mask, RDA_UART_IRQ_MASK);
605
606 if (locked)
607 uart_port_unlock_irqrestore(port, flags);
608}
609
610static void rda_uart_console_write(struct console *co, const char *s,
611 u_int count)
612{
613 struct rda_uart_port *rda_port;
614
615 rda_port = rda_uart_ports[co->index];
616 if (!rda_port)
617 return;
618
619 rda_uart_port_write(&rda_port->port, s, count);
620}
621
622static int rda_uart_console_setup(struct console *co, char *options)
623{
624 struct rda_uart_port *rda_port;
625 int baud = 921600;
626 int bits = 8;
627 int parity = 'n';
628 int flow = 'n';
629
630 if (co->index < 0 || co->index >= RDA_UART_PORT_NUM)
631 return -EINVAL;
632
633 rda_port = rda_uart_ports[co->index];
634 if (!rda_port || !rda_port->port.membase)
635 return -ENODEV;
636
637 if (options)
638 uart_parse_options(options, &baud, &parity, &bits, &flow);
639
640 return uart_set_options(&rda_port->port, co, baud, parity, bits, flow);
641}
642
643static struct console rda_uart_console = {
644 .name = RDA_UART_DEV_NAME,
645 .write = rda_uart_console_write,
646 .device = uart_console_device,
647 .setup = rda_uart_console_setup,
648 .flags = CON_PRINTBUFFER,
649 .index = -1,
650 .data = &rda_uart_driver,
651};
652
653static int __init rda_uart_console_init(void)
654{
655 register_console(&rda_uart_console);
656
657 return 0;
658}
659console_initcall(rda_uart_console_init);
660
661static void rda_uart_early_console_write(struct console *co,
662 const char *s,
663 u_int count)
664{
665 struct earlycon_device *dev = co->data;
666
667 rda_uart_port_write(&dev->port, s, count);
668}
669
670static int __init
671rda_uart_early_console_setup(struct earlycon_device *device, const char *opt)
672{
673 if (!device->port.membase)
674 return -ENODEV;
675
676 device->con->write = rda_uart_early_console_write;
677
678 return 0;
679}
680
681OF_EARLYCON_DECLARE(rda, "rda,8810pl-uart",
682 rda_uart_early_console_setup);
683
684#define RDA_UART_CONSOLE (&rda_uart_console)
685#else
686#define RDA_UART_CONSOLE NULL
687#endif /* CONFIG_SERIAL_RDA_CONSOLE */
688
689static struct uart_driver rda_uart_driver = {
690 .owner = THIS_MODULE,
691 .driver_name = "rda-uart",
692 .dev_name = RDA_UART_DEV_NAME,
693 .nr = RDA_UART_PORT_NUM,
694 .cons = RDA_UART_CONSOLE,
695};
696
697static const struct of_device_id rda_uart_dt_matches[] = {
698 { .compatible = "rda,8810pl-uart" },
699 { }
700};
701MODULE_DEVICE_TABLE(of, rda_uart_dt_matches);
702
703static int rda_uart_probe(struct platform_device *pdev)
704{
705 struct resource *res_mem;
706 struct rda_uart_port *rda_port;
707 int ret, irq;
708
709 if (pdev->dev.of_node)
710 pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
711
712 if (pdev->id < 0 || pdev->id >= RDA_UART_PORT_NUM) {
713 dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
714 return -EINVAL;
715 }
716
717 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
718 if (!res_mem) {
719 dev_err(&pdev->dev, "could not get mem\n");
720 return -ENODEV;
721 }
722
723 irq = platform_get_irq(pdev, 0);
724 if (irq < 0)
725 return irq;
726
727 if (rda_uart_ports[pdev->id]) {
728 dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
729 return -EBUSY;
730 }
731
732 rda_port = devm_kzalloc(&pdev->dev, sizeof(*rda_port), GFP_KERNEL);
733 if (!rda_port)
734 return -ENOMEM;
735
736 rda_port->clk = devm_clk_get(&pdev->dev, NULL);
737 if (IS_ERR(rda_port->clk)) {
738 dev_err(&pdev->dev, "could not get clk\n");
739 return PTR_ERR(rda_port->clk);
740 }
741
742 rda_port->port.dev = &pdev->dev;
743 rda_port->port.regshift = 0;
744 rda_port->port.line = pdev->id;
745 rda_port->port.type = PORT_RDA;
746 rda_port->port.iotype = UPIO_MEM;
747 rda_port->port.mapbase = res_mem->start;
748 rda_port->port.irq = irq;
749 rda_port->port.uartclk = clk_get_rate(rda_port->clk);
750 if (rda_port->port.uartclk == 0) {
751 dev_err(&pdev->dev, "clock rate is zero\n");
752 return -EINVAL;
753 }
754 rda_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
755 UPF_LOW_LATENCY;
756 rda_port->port.x_char = 0;
757 rda_port->port.fifosize = RDA_UART_TX_FIFO_SIZE;
758 rda_port->port.ops = &rda_uart_ops;
759
760 rda_uart_ports[pdev->id] = rda_port;
761 platform_set_drvdata(pdev, rda_port);
762
763 ret = uart_add_one_port(&rda_uart_driver, &rda_port->port);
764 if (ret)
765 rda_uart_ports[pdev->id] = NULL;
766
767 return ret;
768}
769
770static void rda_uart_remove(struct platform_device *pdev)
771{
772 struct rda_uart_port *rda_port = platform_get_drvdata(pdev);
773
774 uart_remove_one_port(&rda_uart_driver, &rda_port->port);
775 rda_uart_ports[pdev->id] = NULL;
776}
777
778static struct platform_driver rda_uart_platform_driver = {
779 .probe = rda_uart_probe,
780 .remove = rda_uart_remove,
781 .driver = {
782 .name = "rda-uart",
783 .of_match_table = rda_uart_dt_matches,
784 },
785};
786
787static int __init rda_uart_init(void)
788{
789 int ret;
790
791 ret = uart_register_driver(&rda_uart_driver);
792 if (ret)
793 return ret;
794
795 ret = platform_driver_register(&rda_uart_platform_driver);
796 if (ret)
797 uart_unregister_driver(&rda_uart_driver);
798
799 return ret;
800}
801
802static void __exit rda_uart_exit(void)
803{
804 platform_driver_unregister(&rda_uart_platform_driver);
805 uart_unregister_driver(&rda_uart_driver);
806}
807
808module_init(rda_uart_init);
809module_exit(rda_uart_exit);
810
811MODULE_AUTHOR("Manivannan Sadhasivam <[email protected]>");
812MODULE_DESCRIPTION("RDA8810PL serial device driver");
813MODULE_LICENSE("GPL");