| 1 | |
| 2 | |
| 3 | * f_acm.c -- USB CDC serial (ACM) function driver
|
| 4 | *
|
| 5 | * Copyright (C) 2003 Al Borchers ([email protected])
|
| 6 | * Copyright (C) 2008 by David Brownell
|
| 7 | * Copyright (C) 2008 by Nokia Corporation
|
| 8 | * Copyright (C) 2009 by Samsung Electronics
|
| 9 | * Author: Michal Nazarewicz ([email protected])
|
| 10 |
|
| 11 |
|
| 12 |
|
| 13 |
|
| 14 | #include <linux/cleanup.h>
|
| 15 | #include <linux/slab.h>
|
| 16 | #include <linux/kernel.h>
|
| 17 | #include <linux/module.h>
|
| 18 | #include <linux/device.h>
|
| 19 | #include <linux/err.h>
|
| 20 |
|
| 21 | #include <linux/usb/gadget.h>
|
| 22 |
|
| 23 | #include "u_serial.h"
|
| 24 |
|
| 25 |
|
| 26 | |
| 27 | * This CDC ACM function support just wraps control functions and
|
| 28 | * notifications around the generic serial-over-usb code.
|
| 29 | *
|
| 30 | * Because CDC ACM is standardized by the USB-IF, many host operating
|
| 31 | * systems have drivers for it. Accordingly, ACM is the preferred
|
| 32 | * interop solution for serial-port type connections. The control
|
| 33 | * models are often not necessary, and in any case don't do much in
|
| 34 | * this bare-bones implementation.
|
| 35 | *
|
| 36 | * Note that even MS-Windows has some support for ACM. However, that
|
| 37 | * support is somewhat broken because when you use ACM in a composite
|
| 38 | * device, having multiple interfaces confuses the poor OS. It doesn't
|
| 39 | * seem to understand CDC Union descriptors. The new "association"
|
| 40 | * descriptors (roughly equivalent to CDC Unions) may sometimes help.
|
| 41 |
|
| 42 |
|
| 43 | struct f_acm {
|
| 44 | struct gserial port;
|
| 45 | u8 ctrl_id, data_id;
|
| 46 | u8 port_num;
|
| 47 | u8 bInterfaceProtocol;
|
| 48 |
|
| 49 | u8 pending;
|
| 50 |
|
| 51 | |
| 52 | * by callbacks both from tty (open/close/break) under its spinlock,
|
| 53 | * and notify_req.complete() which can't use that lock.
|
| 54 |
|
| 55 | spinlock_t lock;
|
| 56 |
|
| 57 | struct usb_ep *notify;
|
| 58 | struct usb_request *notify_req;
|
| 59 |
|
| 60 | struct usb_cdc_line_coding port_line_coding;
|
| 61 |
|
| 62 |
|
| 63 | u16 port_handshake_bits;
|
| 64 |
|
| 65 | u16 serial_state;
|
| 66 | };
|
| 67 |
|
| 68 | static inline struct f_acm *func_to_acm(struct usb_function *f)
|
| 69 | {
|
| 70 | return container_of(f, struct f_acm, port.func);
|
| 71 | }
|
| 72 |
|
| 73 | static inline struct f_acm *port_to_acm(struct gserial *p)
|
| 74 | {
|
| 75 | return container_of(p, struct f_acm, port);
|
| 76 | }
|
| 77 |
|
| 78 |
|
| 79 |
|
| 80 |
|
| 81 |
|
| 82 | #define GS_NOTIFY_INTERVAL_MS 32
|
| 83 | #define GS_NOTIFY_MAXPACKET 10
|
| 84 |
|
| 85 |
|
| 86 |
|
| 87 | static struct usb_interface_assoc_descriptor
|
| 88 | acm_iad_descriptor = {
|
| 89 | .bLength = sizeof acm_iad_descriptor,
|
| 90 | .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION,
|
| 91 |
|
| 92 |
|
| 93 | .bInterfaceCount = 2, |
| 94 | .bFunctionClass = USB_CLASS_COMM,
|
| 95 | .bFunctionSubClass = USB_CDC_SUBCLASS_ACM,
|
| 96 |
|
| 97 |
|
| 98 | };
|
| 99 |
|
| 100 |
|
| 101 | static struct usb_interface_descriptor acm_control_interface_desc = {
|
| 102 | .bLength = USB_DT_INTERFACE_SIZE,
|
| 103 | .bDescriptorType = USB_DT_INTERFACE,
|
| 104 |
|
| 105 | .bNumEndpoints = 1,
|
| 106 | .bInterfaceClass = USB_CLASS_COMM,
|
| 107 | .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
|
| 108 |
|
| 109 |
|
| 110 | };
|
| 111 |
|
| 112 | static struct usb_interface_descriptor acm_data_interface_desc = {
|
| 113 | .bLength = USB_DT_INTERFACE_SIZE,
|
| 114 | .bDescriptorType = USB_DT_INTERFACE,
|
| 115 |
|
| 116 | .bNumEndpoints = 2,
|
| 117 | .bInterfaceClass = USB_CLASS_CDC_DATA,
|
| 118 | .bInterfaceSubClass = 0,
|
| 119 | .bInterfaceProtocol = 0,
|
| 120 |
|
| 121 | };
|
| 122 |
|
| 123 | static struct usb_cdc_header_desc acm_header_desc = {
|
| 124 | .bLength = sizeof(acm_header_desc),
|
| 125 | .bDescriptorType = USB_DT_CS_INTERFACE,
|
| 126 | .bDescriptorSubType = USB_CDC_HEADER_TYPE,
|
| 127 | .bcdCDC = cpu_to_le16(0x0110),
|
| 128 | };
|
| 129 |
|
| 130 | static struct usb_cdc_call_mgmt_descriptor
|
| 131 | acm_call_mgmt_descriptor = {
|
| 132 | .bLength = sizeof(acm_call_mgmt_descriptor),
|
| 133 | .bDescriptorType = USB_DT_CS_INTERFACE,
|
| 134 | .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
|
| 135 | .bmCapabilities = 0,
|
| 136 |
|
| 137 | };
|
| 138 |
|
| 139 | static struct usb_cdc_acm_descriptor acm_descriptor = {
|
| 140 | .bLength = sizeof(acm_descriptor),
|
| 141 | .bDescriptorType = USB_DT_CS_INTERFACE,
|
| 142 | .bDescriptorSubType = USB_CDC_ACM_TYPE,
|
| 143 | .bmCapabilities = USB_CDC_CAP_LINE,
|
| 144 | };
|
| 145 |
|
| 146 | static struct usb_cdc_union_desc acm_union_desc = {
|
| 147 | .bLength = sizeof(acm_union_desc),
|
| 148 | .bDescriptorType = USB_DT_CS_INTERFACE,
|
| 149 | .bDescriptorSubType = USB_CDC_UNION_TYPE,
|
| 150 |
|
| 151 |
|
| 152 | };
|
| 153 |
|
| 154 |
|
| 155 |
|
| 156 | static struct usb_endpoint_descriptor acm_fs_notify_desc = {
|
| 157 | .bLength = USB_DT_ENDPOINT_SIZE,
|
| 158 | .bDescriptorType = USB_DT_ENDPOINT,
|
| 159 | .bEndpointAddress = USB_DIR_IN,
|
| 160 | .bmAttributes = USB_ENDPOINT_XFER_INT,
|
| 161 | .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET),
|
| 162 | .bInterval = GS_NOTIFY_INTERVAL_MS,
|
| 163 | };
|
| 164 |
|
| 165 | static struct usb_endpoint_descriptor acm_fs_in_desc = {
|
| 166 | .bLength = USB_DT_ENDPOINT_SIZE,
|
| 167 | .bDescriptorType = USB_DT_ENDPOINT,
|
| 168 | .bEndpointAddress = USB_DIR_IN,
|
| 169 | .bmAttributes = USB_ENDPOINT_XFER_BULK,
|
| 170 | };
|
| 171 |
|
| 172 | static struct usb_endpoint_descriptor acm_fs_out_desc = {
|
| 173 | .bLength = USB_DT_ENDPOINT_SIZE,
|
| 174 | .bDescriptorType = USB_DT_ENDPOINT,
|
| 175 | .bEndpointAddress = USB_DIR_OUT,
|
| 176 | .bmAttributes = USB_ENDPOINT_XFER_BULK,
|
| 177 | };
|
| 178 |
|
| 179 | static struct usb_descriptor_header *acm_fs_function[] = {
|
| 180 | (struct usb_descriptor_header *) &acm_iad_descriptor,
|
| 181 | (struct usb_descriptor_header *) &acm_control_interface_desc,
|
| 182 | (struct usb_descriptor_header *) &acm_header_desc,
|
| 183 | (struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
|
| 184 | (struct usb_descriptor_header *) &acm_descriptor,
|
| 185 | (struct usb_descriptor_header *) &acm_union_desc,
|
| 186 | (struct usb_descriptor_header *) &acm_fs_notify_desc,
|
| 187 | (struct usb_descriptor_header *) &acm_data_interface_desc,
|
| 188 | (struct usb_descriptor_header *) &acm_fs_in_desc,
|
| 189 | (struct usb_descriptor_header *) &acm_fs_out_desc,
|
| 190 | NULL,
|
| 191 | };
|
| 192 |
|
| 193 |
|
| 194 | static struct usb_endpoint_descriptor acm_hs_notify_desc = {
|
| 195 | .bLength = USB_DT_ENDPOINT_SIZE,
|
| 196 | .bDescriptorType = USB_DT_ENDPOINT,
|
| 197 | .bEndpointAddress = USB_DIR_IN,
|
| 198 | .bmAttributes = USB_ENDPOINT_XFER_INT,
|
| 199 | .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET),
|
| 200 | .bInterval = USB_MS_TO_HS_INTERVAL(GS_NOTIFY_INTERVAL_MS),
|
| 201 | };
|
| 202 |
|
| 203 | static struct usb_endpoint_descriptor acm_hs_in_desc = {
|
| 204 | .bLength = USB_DT_ENDPOINT_SIZE,
|
| 205 | .bDescriptorType = USB_DT_ENDPOINT,
|
| 206 | .bmAttributes = USB_ENDPOINT_XFER_BULK,
|
| 207 | .wMaxPacketSize = cpu_to_le16(512),
|
| 208 | };
|
| 209 |
|
| 210 | static struct usb_endpoint_descriptor acm_hs_out_desc = {
|
| 211 | .bLength = USB_DT_ENDPOINT_SIZE,
|
| 212 | .bDescriptorType = USB_DT_ENDPOINT,
|
| 213 | .bmAttributes = USB_ENDPOINT_XFER_BULK,
|
| 214 | .wMaxPacketSize = cpu_to_le16(512),
|
| 215 | };
|
| 216 |
|
| 217 | static struct usb_descriptor_header *acm_hs_function[] = {
|
| 218 | (struct usb_descriptor_header *) &acm_iad_descriptor,
|
| 219 | (struct usb_descriptor_header *) &acm_control_interface_desc,
|
| 220 | (struct usb_descriptor_header *) &acm_header_desc,
|
| 221 | (struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
|
| 222 | (struct usb_descriptor_header *) &acm_descriptor,
|
| 223 | (struct usb_descriptor_header *) &acm_union_desc,
|
| 224 | (struct usb_descriptor_header *) &acm_hs_notify_desc,
|
| 225 | (struct usb_descriptor_header *) &acm_data_interface_desc,
|
| 226 | (struct usb_descriptor_header *) &acm_hs_in_desc,
|
| 227 | (struct usb_descriptor_header *) &acm_hs_out_desc,
|
| 228 | NULL,
|
| 229 | };
|
| 230 |
|
| 231 | static struct usb_endpoint_descriptor acm_ss_in_desc = {
|
| 232 | .bLength = USB_DT_ENDPOINT_SIZE,
|
| 233 | .bDescriptorType = USB_DT_ENDPOINT,
|
| 234 | .bmAttributes = USB_ENDPOINT_XFER_BULK,
|
| 235 | .wMaxPacketSize = cpu_to_le16(1024),
|
| 236 | };
|
| 237 |
|
| 238 | static struct usb_endpoint_descriptor acm_ss_out_desc = {
|
| 239 | .bLength = USB_DT_ENDPOINT_SIZE,
|
| 240 | .bDescriptorType = USB_DT_ENDPOINT,
|
| 241 | .bmAttributes = USB_ENDPOINT_XFER_BULK,
|
| 242 | .wMaxPacketSize = cpu_to_le16(1024),
|
| 243 | };
|
| 244 |
|
| 245 | static struct usb_ss_ep_comp_descriptor acm_ss_bulk_comp_desc = {
|
| 246 | .bLength = sizeof acm_ss_bulk_comp_desc,
|
| 247 | .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
|
| 248 | };
|
| 249 |
|
| 250 | static struct usb_descriptor_header *acm_ss_function[] = {
|
| 251 | (struct usb_descriptor_header *) &acm_iad_descriptor,
|
| 252 | (struct usb_descriptor_header *) &acm_control_interface_desc,
|
| 253 | (struct usb_descriptor_header *) &acm_header_desc,
|
| 254 | (struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
|
| 255 | (struct usb_descriptor_header *) &acm_descriptor,
|
| 256 | (struct usb_descriptor_header *) &acm_union_desc,
|
| 257 | (struct usb_descriptor_header *) &acm_hs_notify_desc,
|
| 258 | (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
|
| 259 | (struct usb_descriptor_header *) &acm_data_interface_desc,
|
| 260 | (struct usb_descriptor_header *) &acm_ss_in_desc,
|
| 261 | (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
|
| 262 | (struct usb_descriptor_header *) &acm_ss_out_desc,
|
| 263 | (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
|
| 264 | NULL,
|
| 265 | };
|
| 266 |
|
| 267 |
|
| 268 |
|
| 269 | #define ACM_CTRL_IDX 0
|
| 270 | #define ACM_DATA_IDX 1
|
| 271 | #define ACM_IAD_IDX 2
|
| 272 |
|
| 273 |
|
| 274 | static struct usb_string acm_string_defs[] = {
|
| 275 | [ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)",
|
| 276 | [ACM_DATA_IDX].s = "CDC ACM Data",
|
| 277 | [ACM_IAD_IDX ].s = "CDC Serial",
|
| 278 | { }
|
| 279 | };
|
| 280 |
|
| 281 | static struct usb_gadget_strings acm_string_table = {
|
| 282 | .language = 0x0409,
|
| 283 | .strings = acm_string_defs,
|
| 284 | };
|
| 285 |
|
| 286 | static struct usb_gadget_strings *acm_strings[] = {
|
| 287 | &acm_string_table,
|
| 288 | NULL,
|
| 289 | };
|
| 290 |
|
| 291 |
|
| 292 |
|
| 293 | |
| 294 | * The main task of this function is to activate and deactivate
|
| 295 | * that code based on device state; track parameters like line
|
| 296 | * speed, handshake state, and so on; and issue notifications.
|
| 297 |
|
| 298 |
|
| 299 | static void acm_complete_set_line_coding(struct usb_ep *ep,
|
| 300 | struct usb_request *req)
|
| 301 | {
|
| 302 | struct f_acm *acm = ep->driver_data;
|
| 303 | struct usb_composite_dev *cdev = acm->port.func.config->cdev;
|
| 304 |
|
| 305 | if (req->status != 0) {
|
| 306 | dev_dbg(&cdev->gadget->dev, "acm ttyGS%d completion, err %d\n",
|
| 307 | acm->port_num, req->status);
|
| 308 | return;
|
| 309 | }
|
| 310 |
|
| 311 |
|
| 312 | if (req->actual != sizeof(acm->port_line_coding)) {
|
| 313 | dev_dbg(&cdev->gadget->dev, "acm ttyGS%d short resp, len %d\n",
|
| 314 | acm->port_num, req->actual);
|
| 315 | usb_ep_set_halt(ep);
|
| 316 | } else {
|
| 317 | struct usb_cdc_line_coding *value = req->buf;
|
| 318 |
|
| 319 | |
| 320 | * If we change that, (a) validate it first, then
|
| 321 | * (b) update whatever hardware needs updating,
|
| 322 | * (c) worry about locking. This is information on
|
| 323 | * the order of 9600-8-N-1 ... most of which means
|
| 324 | * nothing unless we control a real RS232 line.
|
| 325 |
|
| 326 | acm->port_line_coding = *value;
|
| 327 | }
|
| 328 | }
|
| 329 |
|
| 330 | static int acm_send_break(struct gserial *port, int duration);
|
| 331 |
|
| 332 | static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
|
| 333 | {
|
| 334 | struct f_acm *acm = func_to_acm(f);
|
| 335 | struct usb_composite_dev *cdev = f->config->cdev;
|
| 336 | struct usb_request *req = cdev->req;
|
| 337 | int value = -EOPNOTSUPP;
|
| 338 | u16 w_index = le16_to_cpu(ctrl->wIndex);
|
| 339 | u16 w_value = le16_to_cpu(ctrl->wValue);
|
| 340 | u16 w_length = le16_to_cpu(ctrl->wLength);
|
| 341 |
|
| 342 | |
| 343 | * CDC class messages; interface activation uses set_alt().
|
| 344 | *
|
| 345 | * Note CDC spec table 4 lists the ACM request profile. It requires
|
| 346 | * encapsulated command support ... we don't handle any, and respond
|
| 347 | * to them by stalling. Options include get/set/clear comm features
|
| 348 | * (not that useful) and SEND_BREAK.
|
| 349 |
|
| 350 | switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
|
| 351 |
|
| 352 |
|
| 353 | case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
|
| 354 | | USB_CDC_REQ_SET_LINE_CODING:
|
| 355 | if (w_length != sizeof(struct usb_cdc_line_coding)
|
| 356 | || w_index != acm->ctrl_id)
|
| 357 | goto invalid;
|
| 358 |
|
| 359 | value = w_length;
|
| 360 | cdev->gadget->ep0->driver_data = acm;
|
| 361 | req->complete = acm_complete_set_line_coding;
|
| 362 | break;
|
| 363 |
|
| 364 |
|
| 365 | case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
|
| 366 | | USB_CDC_REQ_GET_LINE_CODING:
|
| 367 | if (w_index != acm->ctrl_id)
|
| 368 | goto invalid;
|
| 369 |
|
| 370 | value = min_t(unsigned, w_length,
|
| 371 | sizeof(struct usb_cdc_line_coding));
|
| 372 | memcpy(req->buf, &acm->port_line_coding, value);
|
| 373 | break;
|
| 374 |
|
| 375 |
|
| 376 | case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
|
| 377 | | USB_CDC_REQ_SET_CONTROL_LINE_STATE:
|
| 378 | if (w_index != acm->ctrl_id)
|
| 379 | goto invalid;
|
| 380 |
|
| 381 | value = 0;
|
| 382 |
|
| 383 | |
| 384 | * host sets the USB_CDC_CTRL_DTR bit; and when it clears
|
| 385 | * that bit, we should return to that no-flow state.
|
| 386 |
|
| 387 | acm->port_handshake_bits = w_value;
|
| 388 | break;
|
| 389 |
|
| 390 | case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
|
| 391 | | USB_CDC_REQ_SEND_BREAK:
|
| 392 | if (w_index != acm->ctrl_id)
|
| 393 | goto invalid;
|
| 394 |
|
| 395 | acm_send_break(&acm->port, w_value);
|
| 396 | break;
|
| 397 |
|
| 398 | default:
|
| 399 | invalid:
|
| 400 | dev_vdbg(&cdev->gadget->dev,
|
| 401 | "invalid control req%02x.%02x v%04x i%04x l%d\n",
|
| 402 | ctrl->bRequestType, ctrl->bRequest,
|
| 403 | w_value, w_index, w_length);
|
| 404 | }
|
| 405 |
|
| 406 |
|
| 407 | if (value >= 0) {
|
| 408 | dev_dbg(&cdev->gadget->dev,
|
| 409 | "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
|
| 410 | acm->port_num, ctrl->bRequestType, ctrl->bRequest,
|
| 411 | w_value, w_index, w_length);
|
| 412 | req->zero = 0;
|
| 413 | req->length = value;
|
| 414 | value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
|
| 415 | if (value < 0)
|
| 416 | ERROR(cdev, "acm response on ttyGS%d, err %d\n",
|
| 417 | acm->port_num, value);
|
| 418 | }
|
| 419 |
|
| 420 |
|
| 421 | return value;
|
| 422 | }
|
| 423 |
|
| 424 | static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
|
| 425 | {
|
| 426 | struct f_acm *acm = func_to_acm(f);
|
| 427 | struct usb_composite_dev *cdev = f->config->cdev;
|
| 428 |
|
| 429 |
|
| 430 |
|
| 431 | if (intf == acm->ctrl_id) {
|
| 432 | if (acm->notify->enabled) {
|
| 433 | dev_vdbg(&cdev->gadget->dev,
|
| 434 | "reset acm control interface %d\n", intf);
|
| 435 | usb_ep_disable(acm->notify);
|
| 436 | }
|
| 437 |
|
| 438 | if (!acm->notify->desc)
|
| 439 | if (config_ep_by_speed(cdev->gadget, f, acm->notify))
|
| 440 | return -EINVAL;
|
| 441 |
|
| 442 | usb_ep_enable(acm->notify);
|
| 443 |
|
| 444 | } else if (intf == acm->data_id) {
|
| 445 | if (acm->notify->enabled) {
|
| 446 | dev_dbg(&cdev->gadget->dev,
|
| 447 | "reset acm ttyGS%d\n", acm->port_num);
|
| 448 | gserial_disconnect(&acm->port);
|
| 449 | }
|
| 450 | if (!acm->port.in->desc || !acm->port.out->desc) {
|
| 451 | dev_dbg(&cdev->gadget->dev,
|
| 452 | "activate acm ttyGS%d\n", acm->port_num);
|
| 453 | if (config_ep_by_speed(cdev->gadget, f,
|
| 454 | acm->port.in) ||
|
| 455 | config_ep_by_speed(cdev->gadget, f,
|
| 456 | acm->port.out)) {
|
| 457 | acm->port.in->desc = NULL;
|
| 458 | acm->port.out->desc = NULL;
|
| 459 | return -EINVAL;
|
| 460 | }
|
| 461 | }
|
| 462 | gserial_connect(&acm->port, acm->port_num);
|
| 463 |
|
| 464 | } else
|
| 465 | return -EINVAL;
|
| 466 |
|
| 467 | return 0;
|
| 468 | }
|
| 469 |
|
| 470 | static void acm_disable(struct usb_function *f)
|
| 471 | {
|
| 472 | struct f_acm *acm = func_to_acm(f);
|
| 473 | struct usb_composite_dev *cdev = f->config->cdev;
|
| 474 |
|
| 475 | dev_dbg(&cdev->gadget->dev, "acm ttyGS%d deactivated\n", acm->port_num);
|
| 476 | gserial_disconnect(&acm->port);
|
| 477 | usb_ep_disable(acm->notify);
|
| 478 | }
|
| 479 |
|
| 480 |
|
| 481 |
|
| 482 | |
| 483 | * acm_cdc_notify - issue CDC notification to host
|
| 484 | * @acm: wraps host to be notified
|
| 485 | * @type: notification type
|
| 486 | * @value: Refer to cdc specs, wValue field.
|
| 487 | * @data: data to be sent
|
| 488 | * @length: size of data
|
| 489 | * Context: irqs blocked, acm->lock held, acm_notify_req non-null
|
| 490 | *
|
| 491 | * Returns zero on success or a negative errno.
|
| 492 | *
|
| 493 | * See section 6.3.5 of the CDC 1.1 specification for information
|
| 494 | * about the only notification we issue: SerialState change.
|
| 495 |
|
| 496 | static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
|
| 497 | void *data, unsigned length)
|
| 498 | {
|
| 499 | struct usb_ep *ep = acm->notify;
|
| 500 | struct usb_request *req;
|
| 501 | struct usb_cdc_notification *notify;
|
| 502 | const unsigned len = sizeof(*notify) + length;
|
| 503 | void *buf;
|
| 504 | int status;
|
| 505 |
|
| 506 | req = acm->notify_req;
|
| 507 | acm->notify_req = NULL;
|
| 508 | acm->pending = false;
|
| 509 |
|
| 510 | req->length = len;
|
| 511 | notify = req->buf;
|
| 512 | buf = notify + 1;
|
| 513 |
|
| 514 | notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS
|
| 515 | | USB_RECIP_INTERFACE;
|
| 516 | notify->bNotificationType = type;
|
| 517 | notify->wValue = cpu_to_le16(value);
|
| 518 | notify->wIndex = cpu_to_le16(acm->ctrl_id);
|
| 519 | notify->wLength = cpu_to_le16(length);
|
| 520 | memcpy(buf, data, length);
|
| 521 |
|
| 522 |
|
| 523 | spin_unlock(&acm->lock);
|
| 524 | status = usb_ep_queue(ep, req, GFP_ATOMIC);
|
| 525 | spin_lock(&acm->lock);
|
| 526 |
|
| 527 | if (status < 0) {
|
| 528 | ERROR(acm->port.func.config->cdev,
|
| 529 | "acm ttyGS%d can't notify serial state, %d\n",
|
| 530 | acm->port_num, status);
|
| 531 | acm->notify_req = req;
|
| 532 | }
|
| 533 |
|
| 534 | return status;
|
| 535 | }
|
| 536 |
|
| 537 | static int acm_notify_serial_state(struct f_acm *acm)
|
| 538 | {
|
| 539 | struct usb_composite_dev *cdev = acm->port.func.config->cdev;
|
| 540 | int status;
|
| 541 | __le16 serial_state;
|
| 542 |
|
| 543 | spin_lock(&acm->lock);
|
| 544 | if (acm->notify_req) {
|
| 545 | dev_dbg(&cdev->gadget->dev, "acm ttyGS%d serial state %04x\n",
|
| 546 | acm->port_num, acm->serial_state);
|
| 547 | serial_state = cpu_to_le16(acm->serial_state);
|
| 548 | status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
|
| 549 | 0, &serial_state, sizeof(acm->serial_state));
|
| 550 | } else {
|
| 551 | acm->pending = true;
|
| 552 | status = 0;
|
| 553 | }
|
| 554 | spin_unlock(&acm->lock);
|
| 555 | return status;
|
| 556 | }
|
| 557 |
|
| 558 | static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req)
|
| 559 | {
|
| 560 | struct f_acm *acm = req->context;
|
| 561 | u8 doit = false;
|
| 562 |
|
| 563 | |
| 564 | * which is why ACM needs its own spinlock
|
| 565 |
|
| 566 | spin_lock(&acm->lock);
|
| 567 | if (req->status != -ESHUTDOWN)
|
| 568 | doit = acm->pending;
|
| 569 | acm->notify_req = req;
|
| 570 | spin_unlock(&acm->lock);
|
| 571 |
|
| 572 | if (doit)
|
| 573 | acm_notify_serial_state(acm);
|
| 574 | }
|
| 575 |
|
| 576 |
|
| 577 |
|
| 578 | static void acm_connect(struct gserial *port)
|
| 579 | {
|
| 580 | struct f_acm *acm = port_to_acm(port);
|
| 581 |
|
| 582 | acm->serial_state |= USB_CDC_SERIAL_STATE_DSR | USB_CDC_SERIAL_STATE_DCD;
|
| 583 | acm_notify_serial_state(acm);
|
| 584 | }
|
| 585 |
|
| 586 | static void acm_disconnect(struct gserial *port)
|
| 587 | {
|
| 588 | struct f_acm *acm = port_to_acm(port);
|
| 589 |
|
| 590 | acm->serial_state &= ~(USB_CDC_SERIAL_STATE_DSR | USB_CDC_SERIAL_STATE_DCD);
|
| 591 | acm_notify_serial_state(acm);
|
| 592 | }
|
| 593 |
|
| 594 | static int acm_send_break(struct gserial *port, int duration)
|
| 595 | {
|
| 596 | struct f_acm *acm = port_to_acm(port);
|
| 597 | u16 state;
|
| 598 |
|
| 599 | state = acm->serial_state;
|
| 600 | state &= ~USB_CDC_SERIAL_STATE_BREAK;
|
| 601 | if (duration)
|
| 602 | state |= USB_CDC_SERIAL_STATE_BREAK;
|
| 603 |
|
| 604 | acm->serial_state = state;
|
| 605 | return acm_notify_serial_state(acm);
|
| 606 | }
|
| 607 |
|
| 608 |
|
| 609 |
|
| 610 |
|
| 611 | static int
|
| 612 | acm_bind(struct usb_configuration *c, struct usb_function *f)
|
| 613 | {
|
| 614 | struct usb_composite_dev *cdev = c->cdev;
|
| 615 | struct f_acm *acm = func_to_acm(f);
|
| 616 | struct usb_string *us;
|
| 617 | int status;
|
| 618 | struct usb_ep *ep;
|
| 619 | struct usb_request *request __free(free_usb_request) = NULL;
|
| 620 |
|
| 621 | |
| 622 | * distinguish instances ...
|
| 623 |
|
| 624 |
|
| 625 |
|
| 626 | us = usb_gstrings_attach(cdev, acm_strings,
|
| 627 | ARRAY_SIZE(acm_string_defs));
|
| 628 | if (IS_ERR(us))
|
| 629 | return PTR_ERR(us);
|
| 630 | acm_control_interface_desc.iInterface = us[ACM_CTRL_IDX].id;
|
| 631 | acm_data_interface_desc.iInterface = us[ACM_DATA_IDX].id;
|
| 632 | acm_iad_descriptor.iFunction = us[ACM_IAD_IDX].id;
|
| 633 |
|
| 634 |
|
| 635 | status = usb_interface_id(c, f);
|
| 636 | if (status < 0)
|
| 637 | return status;
|
| 638 | acm->ctrl_id = status;
|
| 639 | acm_iad_descriptor.bFirstInterface = status;
|
| 640 |
|
| 641 | acm_control_interface_desc.bInterfaceNumber = status;
|
| 642 | acm_union_desc .bMasterInterface0 = status;
|
| 643 |
|
| 644 | status = usb_interface_id(c, f);
|
| 645 | if (status < 0)
|
| 646 | return status;
|
| 647 | acm->data_id = status;
|
| 648 |
|
| 649 | acm_data_interface_desc.bInterfaceNumber = status;
|
| 650 | acm_union_desc.bSlaveInterface0 = status;
|
| 651 | acm_call_mgmt_descriptor.bDataInterface = status;
|
| 652 |
|
| 653 |
|
| 654 | ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc);
|
| 655 | if (!ep)
|
| 656 | return -ENODEV;
|
| 657 | acm->port.in = ep;
|
| 658 |
|
| 659 | ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc);
|
| 660 | if (!ep)
|
| 661 | return -ENODEV;
|
| 662 | acm->port.out = ep;
|
| 663 |
|
| 664 | ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc);
|
| 665 | if (!ep)
|
| 666 | return -ENODEV;
|
| 667 | acm->notify = ep;
|
| 668 |
|
| 669 | acm_iad_descriptor.bFunctionProtocol = acm->bInterfaceProtocol;
|
| 670 | acm_control_interface_desc.bInterfaceProtocol = acm->bInterfaceProtocol;
|
| 671 |
|
| 672 |
|
| 673 | request = gs_alloc_req(ep,
|
| 674 | sizeof(struct usb_cdc_notification) + 2,
|
| 675 | GFP_KERNEL);
|
| 676 | if (!request)
|
| 677 | return -ENODEV;
|
| 678 |
|
| 679 | request->complete = acm_cdc_notify_complete;
|
| 680 | request->context = acm;
|
| 681 |
|
| 682 | |
| 683 | * hardware is dual speed, all bulk-capable endpoints work at
|
| 684 | * both speeds
|
| 685 |
|
| 686 | acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
|
| 687 | acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
|
| 688 | acm_hs_notify_desc.bEndpointAddress =
|
| 689 | acm_fs_notify_desc.bEndpointAddress;
|
| 690 |
|
| 691 | acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
|
| 692 | acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
|
| 693 |
|
| 694 | status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function,
|
| 695 | acm_ss_function, acm_ss_function);
|
| 696 | if (status)
|
| 697 | return status;
|
| 698 |
|
| 699 | acm->notify_req = no_free_ptr(request);
|
| 700 |
|
| 701 | dev_dbg(&cdev->gadget->dev,
|
| 702 | "acm ttyGS%d: IN/%s OUT/%s NOTIFY/%s\n",
|
| 703 | acm->port_num,
|
| 704 | acm->port.in->name, acm->port.out->name,
|
| 705 | acm->notify->name);
|
| 706 | return 0;
|
| 707 | }
|
| 708 |
|
| 709 | static void acm_unbind(struct usb_configuration *c, struct usb_function *f)
|
| 710 | {
|
| 711 | struct f_acm *acm = func_to_acm(f);
|
| 712 |
|
| 713 | acm_string_defs[0].id = 0;
|
| 714 | usb_free_all_descriptors(f);
|
| 715 | if (acm->notify_req)
|
| 716 | gs_free_req(acm->notify, acm->notify_req);
|
| 717 | }
|
| 718 |
|
| 719 | static void acm_free_func(struct usb_function *f)
|
| 720 | {
|
| 721 | struct f_acm *acm = func_to_acm(f);
|
| 722 | struct f_serial_opts *opts;
|
| 723 |
|
| 724 | opts = container_of(f->fi, struct f_serial_opts, func_inst);
|
| 725 |
|
| 726 | kfree(acm);
|
| 727 | mutex_lock(&opts->lock);
|
| 728 | opts->instances--;
|
| 729 | mutex_unlock(&opts->lock);
|
| 730 | }
|
| 731 |
|
| 732 | static void acm_resume(struct usb_function *f)
|
| 733 | {
|
| 734 | struct f_acm *acm = func_to_acm(f);
|
| 735 |
|
| 736 | gserial_resume(&acm->port);
|
| 737 | }
|
| 738 |
|
| 739 | static void acm_suspend(struct usb_function *f)
|
| 740 | {
|
| 741 | struct f_acm *acm = func_to_acm(f);
|
| 742 |
|
| 743 | gserial_suspend(&acm->port);
|
| 744 | }
|
| 745 |
|
| 746 | static struct usb_function *acm_alloc_func(struct usb_function_instance *fi)
|
| 747 | {
|
| 748 | struct f_serial_opts *opts;
|
| 749 | struct f_acm *acm;
|
| 750 |
|
| 751 | acm = kzalloc_obj(*acm);
|
| 752 | if (!acm)
|
| 753 | return ERR_PTR(-ENOMEM);
|
| 754 |
|
| 755 | spin_lock_init(&acm->lock);
|
| 756 |
|
| 757 | acm->port.connect = acm_connect;
|
| 758 | acm->port.disconnect = acm_disconnect;
|
| 759 | acm->port.send_break = acm_send_break;
|
| 760 |
|
| 761 | acm->port.func.name = "acm";
|
| 762 | acm->port.func.strings = acm_strings;
|
| 763 |
|
| 764 | acm->port.func.bind = acm_bind;
|
| 765 | acm->port.func.set_alt = acm_set_alt;
|
| 766 | acm->port.func.setup = acm_setup;
|
| 767 | acm->port.func.disable = acm_disable;
|
| 768 |
|
| 769 | opts = container_of(fi, struct f_serial_opts, func_inst);
|
| 770 | mutex_lock(&opts->lock);
|
| 771 | acm->port_num = opts->port_num;
|
| 772 | acm->bInterfaceProtocol = opts->protocol;
|
| 773 | opts->instances++;
|
| 774 | mutex_unlock(&opts->lock);
|
| 775 | acm->port.func.unbind = acm_unbind;
|
| 776 | acm->port.func.free_func = acm_free_func;
|
| 777 | acm->port.func.resume = acm_resume;
|
| 778 | acm->port.func.suspend = acm_suspend;
|
| 779 |
|
| 780 | return &acm->port.func;
|
| 781 | }
|
| 782 |
|
| 783 | static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
|
| 784 | {
|
| 785 | return container_of(to_config_group(item), struct f_serial_opts,
|
| 786 | func_inst.group);
|
| 787 | }
|
| 788 |
|
| 789 | static void acm_attr_release(struct config_item *item)
|
| 790 | {
|
| 791 | struct f_serial_opts *opts = to_f_serial_opts(item);
|
| 792 |
|
| 793 | usb_put_function_instance(&opts->func_inst);
|
| 794 | }
|
| 795 |
|
| 796 | static const struct configfs_item_operations acm_item_ops = {
|
| 797 | .release = acm_attr_release,
|
| 798 | };
|
| 799 |
|
| 800 | #ifdef CONFIG_U_SERIAL_CONSOLE
|
| 801 |
|
| 802 | static ssize_t f_acm_console_store(struct config_item *item,
|
| 803 | const char *page, size_t count)
|
| 804 | {
|
| 805 | return gserial_set_console(to_f_serial_opts(item)->port_num,
|
| 806 | page, count);
|
| 807 | }
|
| 808 |
|
| 809 | static ssize_t f_acm_console_show(struct config_item *item, char *page)
|
| 810 | {
|
| 811 | return gserial_get_console(to_f_serial_opts(item)->port_num, page);
|
| 812 | }
|
| 813 |
|
| 814 | CONFIGFS_ATTR(f_acm_, console);
|
| 815 |
|
| 816 | #endif
|
| 817 |
|
| 818 | static ssize_t f_acm_port_num_show(struct config_item *item, char *page)
|
| 819 | {
|
| 820 | return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num);
|
| 821 | }
|
| 822 |
|
| 823 | CONFIGFS_ATTR_RO(f_acm_, port_num);
|
| 824 |
|
| 825 | static ssize_t f_acm_protocol_show(struct config_item *item, char *page)
|
| 826 | {
|
| 827 | return sprintf(page, "%u\n", to_f_serial_opts(item)->protocol);
|
| 828 | }
|
| 829 |
|
| 830 | static ssize_t f_acm_protocol_store(struct config_item *item,
|
| 831 | const char *page, size_t count)
|
| 832 | {
|
| 833 | struct f_serial_opts *opts = to_f_serial_opts(item);
|
| 834 | int ret;
|
| 835 |
|
| 836 | mutex_lock(&opts->lock);
|
| 837 |
|
| 838 | if (opts->instances) {
|
| 839 | ret = -EBUSY;
|
| 840 | goto out;
|
| 841 | }
|
| 842 |
|
| 843 | ret = kstrtou8(page, 0, &opts->protocol);
|
| 844 | if (ret)
|
| 845 | goto out;
|
| 846 | ret = count;
|
| 847 |
|
| 848 | out:
|
| 849 | mutex_unlock(&opts->lock);
|
| 850 | return ret;
|
| 851 | }
|
| 852 |
|
| 853 | CONFIGFS_ATTR(f_acm_, protocol);
|
| 854 |
|
| 855 | static struct configfs_attribute *acm_attrs[] = {
|
| 856 | #ifdef CONFIG_U_SERIAL_CONSOLE
|
| 857 | &f_acm_attr_console,
|
| 858 | #endif
|
| 859 | &f_acm_attr_port_num,
|
| 860 | &f_acm_attr_protocol,
|
| 861 | NULL,
|
| 862 | };
|
| 863 |
|
| 864 | static const struct config_item_type acm_func_type = {
|
| 865 | .ct_item_ops = &acm_item_ops,
|
| 866 | .ct_attrs = acm_attrs,
|
| 867 | .ct_owner = THIS_MODULE,
|
| 868 | };
|
| 869 |
|
| 870 | static void acm_free_instance(struct usb_function_instance *fi)
|
| 871 | {
|
| 872 | struct f_serial_opts *opts;
|
| 873 |
|
| 874 | opts = container_of(fi, struct f_serial_opts, func_inst);
|
| 875 | gserial_free_line(opts->port_num);
|
| 876 | mutex_destroy(&opts->lock);
|
| 877 | kfree(opts);
|
| 878 | }
|
| 879 |
|
| 880 | static struct usb_function_instance *acm_alloc_instance(void)
|
| 881 | {
|
| 882 | struct f_serial_opts *opts;
|
| 883 | int ret;
|
| 884 |
|
| 885 | opts = kzalloc_obj(*opts);
|
| 886 | if (!opts)
|
| 887 | return ERR_PTR(-ENOMEM);
|
| 888 | opts->protocol = USB_CDC_ACM_PROTO_AT_V25TER;
|
| 889 | opts->func_inst.free_func_inst = acm_free_instance;
|
| 890 | mutex_init(&opts->lock);
|
| 891 | ret = gserial_alloc_line(&opts->port_num);
|
| 892 | if (ret) {
|
| 893 | kfree(opts);
|
| 894 | return ERR_PTR(ret);
|
| 895 | }
|
| 896 | config_group_init_type_name(&opts->func_inst.group, "",
|
| 897 | &acm_func_type);
|
| 898 | return &opts->func_inst;
|
| 899 | }
|
| 900 | DECLARE_USB_FUNCTION_INIT(acm, acm_alloc_instance, acm_alloc_func);
|
| 901 | MODULE_DESCRIPTION("USB CDC serial (ACM) function driver");
|
| 902 | MODULE_LICENSE("GPL");
|