| 1 | |
| 2 | |
| 3 | * Generic ULPI USB transceiver support
|
| 4 | *
|
| 5 | * Copyright (C) 2009 Daniel Mack <[email protected]>
|
| 6 | *
|
| 7 | * Based on sources from
|
| 8 | *
|
| 9 | * Sascha Hauer <[email protected]>
|
| 10 | * Freescale Semiconductors
|
| 11 |
|
| 12 |
|
| 13 | #include <linux/kernel.h>
|
| 14 | #include <linux/slab.h>
|
| 15 | #include <linux/export.h>
|
| 16 | #include <linux/usb.h>
|
| 17 | #include <linux/usb/otg.h>
|
| 18 | #include <linux/usb/ulpi.h>
|
| 19 |
|
| 20 |
|
| 21 | struct ulpi_info {
|
| 22 | unsigned int id;
|
| 23 | char *name;
|
| 24 | };
|
| 25 |
|
| 26 | #define ULPI_ID(vendor, product) (((vendor) << 16) | (product))
|
| 27 | #define ULPI_INFO(_id, _name) \
|
| 28 | { \
|
| 29 | .id = (_id), \
|
| 30 | .name = (_name), \
|
| 31 | }
|
| 32 |
|
| 33 |
|
| 34 | static struct ulpi_info ulpi_ids[] = {
|
| 35 | ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"),
|
| 36 | ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
|
| 37 | ULPI_INFO(ULPI_ID(0x0424, 0x0007), "SMSC USB3320"),
|
| 38 | ULPI_INFO(ULPI_ID(0x0424, 0x0009), "SMSC USB334x"),
|
| 39 | ULPI_INFO(ULPI_ID(0x0451, 0x1507), "TI TUSB1210"),
|
| 40 | };
|
| 41 |
|
| 42 | static int ulpi_set_otg_flags(struct usb_phy *phy)
|
| 43 | {
|
| 44 | unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN |
|
| 45 | ULPI_OTG_CTRL_DM_PULLDOWN;
|
| 46 |
|
| 47 | if (phy->flags & ULPI_OTG_ID_PULLUP)
|
| 48 | flags |= ULPI_OTG_CTRL_ID_PULLUP;
|
| 49 |
|
| 50 | |
| 51 | * ULPI Specification rev.1.1 default
|
| 52 | * for Dp/DmPulldown is enabled.
|
| 53 |
|
| 54 | if (phy->flags & ULPI_OTG_DP_PULLDOWN_DIS)
|
| 55 | flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN;
|
| 56 |
|
| 57 | if (phy->flags & ULPI_OTG_DM_PULLDOWN_DIS)
|
| 58 | flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN;
|
| 59 |
|
| 60 | if (phy->flags & ULPI_OTG_EXTVBUSIND)
|
| 61 | flags |= ULPI_OTG_CTRL_EXTVBUSIND;
|
| 62 |
|
| 63 | return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL);
|
| 64 | }
|
| 65 |
|
| 66 | static int ulpi_set_fc_flags(struct usb_phy *phy)
|
| 67 | {
|
| 68 | unsigned int flags = 0;
|
| 69 |
|
| 70 | |
| 71 | * ULPI Specification rev.1.1 default
|
| 72 | * for XcvrSelect is Full Speed.
|
| 73 |
|
| 74 | if (phy->flags & ULPI_FC_HS)
|
| 75 | flags |= ULPI_FUNC_CTRL_HIGH_SPEED;
|
| 76 | else if (phy->flags & ULPI_FC_LS)
|
| 77 | flags |= ULPI_FUNC_CTRL_LOW_SPEED;
|
| 78 | else if (phy->flags & ULPI_FC_FS4LS)
|
| 79 | flags |= ULPI_FUNC_CTRL_FS4LS;
|
| 80 | else
|
| 81 | flags |= ULPI_FUNC_CTRL_FULL_SPEED;
|
| 82 |
|
| 83 | if (phy->flags & ULPI_FC_TERMSEL)
|
| 84 | flags |= ULPI_FUNC_CTRL_TERMSELECT;
|
| 85 |
|
| 86 | |
| 87 | * ULPI Specification rev.1.1 default
|
| 88 | * for OpMode is Normal Operation.
|
| 89 |
|
| 90 | if (phy->flags & ULPI_FC_OP_NODRV)
|
| 91 | flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
|
| 92 | else if (phy->flags & ULPI_FC_OP_DIS_NRZI)
|
| 93 | flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI;
|
| 94 | else if (phy->flags & ULPI_FC_OP_NSYNC_NEOP)
|
| 95 | flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP;
|
| 96 | else
|
| 97 | flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
|
| 98 |
|
| 99 | |
| 100 | * ULPI Specification rev.1.1 default
|
| 101 | * for SuspendM is Powered.
|
| 102 |
|
| 103 | flags |= ULPI_FUNC_CTRL_SUSPENDM;
|
| 104 |
|
| 105 | return usb_phy_io_write(phy, flags, ULPI_FUNC_CTRL);
|
| 106 | }
|
| 107 |
|
| 108 | static int ulpi_set_ic_flags(struct usb_phy *phy)
|
| 109 | {
|
| 110 | unsigned int flags = 0;
|
| 111 |
|
| 112 | if (phy->flags & ULPI_IC_AUTORESUME)
|
| 113 | flags |= ULPI_IFC_CTRL_AUTORESUME;
|
| 114 |
|
| 115 | if (phy->flags & ULPI_IC_EXTVBUS_INDINV)
|
| 116 | flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS;
|
| 117 |
|
| 118 | if (phy->flags & ULPI_IC_IND_PASSTHRU)
|
| 119 | flags |= ULPI_IFC_CTRL_PASSTHRU;
|
| 120 |
|
| 121 | if (phy->flags & ULPI_IC_PROTECT_DIS)
|
| 122 | flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE;
|
| 123 |
|
| 124 | return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL);
|
| 125 | }
|
| 126 |
|
| 127 | static int ulpi_set_flags(struct usb_phy *phy)
|
| 128 | {
|
| 129 | int ret;
|
| 130 |
|
| 131 | ret = ulpi_set_otg_flags(phy);
|
| 132 | if (ret)
|
| 133 | return ret;
|
| 134 |
|
| 135 | ret = ulpi_set_ic_flags(phy);
|
| 136 | if (ret)
|
| 137 | return ret;
|
| 138 |
|
| 139 | return ulpi_set_fc_flags(phy);
|
| 140 | }
|
| 141 |
|
| 142 | static int ulpi_check_integrity(struct usb_phy *phy)
|
| 143 | {
|
| 144 | int ret, i;
|
| 145 | unsigned int val = 0x55;
|
| 146 |
|
| 147 | for (i = 0; i < 2; i++) {
|
| 148 | ret = usb_phy_io_write(phy, val, ULPI_SCRATCH);
|
| 149 | if (ret < 0)
|
| 150 | return ret;
|
| 151 |
|
| 152 | ret = usb_phy_io_read(phy, ULPI_SCRATCH);
|
| 153 | if (ret < 0)
|
| 154 | return ret;
|
| 155 |
|
| 156 | if (ret != val) {
|
| 157 | pr_err("ULPI integrity check: failed!");
|
| 158 | return -ENODEV;
|
| 159 | }
|
| 160 | val = val << 1;
|
| 161 | }
|
| 162 |
|
| 163 | pr_info("ULPI integrity check: passed.\n");
|
| 164 |
|
| 165 | return 0;
|
| 166 | }
|
| 167 |
|
| 168 | static int ulpi_init(struct usb_phy *phy)
|
| 169 | {
|
| 170 | int i, vid, pid, ret;
|
| 171 | u32 ulpi_id = 0;
|
| 172 |
|
| 173 | for (i = 0; i < 4; i++) {
|
| 174 | ret = usb_phy_io_read(phy, ULPI_PRODUCT_ID_HIGH - i);
|
| 175 | if (ret < 0)
|
| 176 | return ret;
|
| 177 | ulpi_id = (ulpi_id << 8) | ret;
|
| 178 | }
|
| 179 | vid = ulpi_id & 0xffff;
|
| 180 | pid = ulpi_id >> 16;
|
| 181 |
|
| 182 | pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
|
| 183 |
|
| 184 | for (i = 0; i < ARRAY_SIZE(ulpi_ids); i++) {
|
| 185 | if (ulpi_ids[i].id == ULPI_ID(vid, pid)) {
|
| 186 | pr_info("Found %s ULPI transceiver.\n",
|
| 187 | ulpi_ids[i].name);
|
| 188 | break;
|
| 189 | }
|
| 190 | }
|
| 191 |
|
| 192 | ret = ulpi_check_integrity(phy);
|
| 193 | if (ret)
|
| 194 | return ret;
|
| 195 |
|
| 196 | return ulpi_set_flags(phy);
|
| 197 | }
|
| 198 |
|
| 199 | static int ulpi_set_host(struct usb_otg *otg, struct usb_bus *host)
|
| 200 | {
|
| 201 | struct usb_phy *phy = otg->usb_phy;
|
| 202 | unsigned int flags = usb_phy_io_read(phy, ULPI_IFC_CTRL);
|
| 203 |
|
| 204 | if (!host) {
|
| 205 | otg->host = NULL;
|
| 206 | return 0;
|
| 207 | }
|
| 208 |
|
| 209 | otg->host = host;
|
| 210 |
|
| 211 | flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE |
|
| 212 | ULPI_IFC_CTRL_3_PIN_SERIAL_MODE |
|
| 213 | ULPI_IFC_CTRL_CARKITMODE);
|
| 214 |
|
| 215 | if (phy->flags & ULPI_IC_6PIN_SERIAL)
|
| 216 | flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE;
|
| 217 | else if (phy->flags & ULPI_IC_3PIN_SERIAL)
|
| 218 | flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE;
|
| 219 | else if (phy->flags & ULPI_IC_CARKIT)
|
| 220 | flags |= ULPI_IFC_CTRL_CARKITMODE;
|
| 221 |
|
| 222 | return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL);
|
| 223 | }
|
| 224 |
|
| 225 | static int ulpi_set_vbus(struct usb_otg *otg, bool on)
|
| 226 | {
|
| 227 | struct usb_phy *phy = otg->usb_phy;
|
| 228 | unsigned int flags = usb_phy_io_read(phy, ULPI_OTG_CTRL);
|
| 229 |
|
| 230 | flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT);
|
| 231 |
|
| 232 | if (on) {
|
| 233 | if (phy->flags & ULPI_OTG_DRVVBUS)
|
| 234 | flags |= ULPI_OTG_CTRL_DRVVBUS;
|
| 235 |
|
| 236 | if (phy->flags & ULPI_OTG_DRVVBUS_EXT)
|
| 237 | flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
|
| 238 | }
|
| 239 |
|
| 240 | return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL);
|
| 241 | }
|
| 242 |
|
| 243 | static void otg_ulpi_init(struct usb_phy *phy, struct usb_otg *otg,
|
| 244 | struct usb_phy_io_ops *ops,
|
| 245 | unsigned int flags)
|
| 246 | {
|
| 247 | phy->label = "ULPI";
|
| 248 | phy->flags = flags;
|
| 249 | phy->io_ops = ops;
|
| 250 | phy->otg = otg;
|
| 251 | phy->init = ulpi_init;
|
| 252 |
|
| 253 | otg->usb_phy = phy;
|
| 254 | otg->set_host = ulpi_set_host;
|
| 255 | otg->set_vbus = ulpi_set_vbus;
|
| 256 | }
|
| 257 |
|
| 258 | struct usb_phy *
|
| 259 | devm_otg_ulpi_create(struct device *dev,
|
| 260 | struct usb_phy_io_ops *ops,
|
| 261 | unsigned int flags)
|
| 262 | {
|
| 263 | struct usb_phy *phy;
|
| 264 | struct usb_otg *otg;
|
| 265 |
|
| 266 | phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
| 267 | if (!phy)
|
| 268 | return NULL;
|
| 269 |
|
| 270 | otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
|
| 271 | if (!otg) {
|
| 272 | devm_kfree(dev, phy);
|
| 273 | return NULL;
|
| 274 | }
|
| 275 |
|
| 276 | otg_ulpi_init(phy, otg, ops, flags);
|
| 277 |
|
| 278 | return phy;
|
| 279 | }
|
| 280 | EXPORT_SYMBOL_GPL(devm_otg_ulpi_create);
|