| 1 | |
| 2 | |
| 3 | * Driver for Alauda-based card readers
|
| 4 | *
|
| 5 | * Current development and maintenance by:
|
| 6 | * (c) 2005 Daniel Drake <[email protected]>
|
| 7 | *
|
| 8 | * The 'Alauda' is a chip manufacturered by RATOC for OEM use.
|
| 9 | *
|
| 10 | * Alauda implements a vendor-specific command set to access two media reader
|
| 11 | * ports (XD, SmartMedia). This driver converts SCSI commands to the commands
|
| 12 | * which are accepted by these devices.
|
| 13 | *
|
| 14 | * The driver was developed through reverse-engineering, with the help of the
|
| 15 | * sddr09 driver which has many similarities, and with some help from the
|
| 16 | * (very old) vendor-supplied GPL sma03 driver.
|
| 17 | *
|
| 18 | * For protocol info, see http://alauda.sourceforge.net
|
| 19 |
|
| 20 |
|
| 21 | #include <linux/module.h>
|
| 22 | #include <linux/slab.h>
|
| 23 |
|
| 24 | #include <scsi/scsi.h>
|
| 25 | #include <scsi/scsi_cmnd.h>
|
| 26 | #include <scsi/scsi_device.h>
|
| 27 |
|
| 28 | #include "usb.h"
|
| 29 | #include "transport.h"
|
| 30 | #include "protocol.h"
|
| 31 | #include "debug.h"
|
| 32 | #include "scsiglue.h"
|
| 33 |
|
| 34 | #define DRV_NAME "ums-alauda"
|
| 35 |
|
| 36 | MODULE_DESCRIPTION("Driver for Alauda-based card readers");
|
| 37 | MODULE_AUTHOR("Daniel Drake <[email protected]>");
|
| 38 | MODULE_LICENSE("GPL");
|
| 39 | MODULE_IMPORT_NS("USB_STORAGE");
|
| 40 |
|
| 41 | |
| 42 | * Status bytes
|
| 43 |
|
| 44 | #define ALAUDA_STATUS_ERROR 0x01
|
| 45 | #define ALAUDA_STATUS_READY 0x40
|
| 46 |
|
| 47 | |
| 48 | * Control opcodes (for request field)
|
| 49 |
|
| 50 | #define ALAUDA_GET_XD_MEDIA_STATUS 0x08
|
| 51 | #define ALAUDA_GET_SM_MEDIA_STATUS 0x98
|
| 52 | #define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a
|
| 53 | #define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a
|
| 54 | #define ALAUDA_GET_XD_MEDIA_SIG 0x86
|
| 55 | #define ALAUDA_GET_SM_MEDIA_SIG 0x96
|
| 56 |
|
| 57 | |
| 58 | * Bulk command identity (byte 0)
|
| 59 |
|
| 60 | #define ALAUDA_BULK_CMD 0x40
|
| 61 |
|
| 62 | |
| 63 | * Bulk opcodes (byte 1)
|
| 64 |
|
| 65 | #define ALAUDA_BULK_GET_REDU_DATA 0x85
|
| 66 | #define ALAUDA_BULK_READ_BLOCK 0x94
|
| 67 | #define ALAUDA_BULK_ERASE_BLOCK 0xa3
|
| 68 | #define ALAUDA_BULK_WRITE_BLOCK 0xb4
|
| 69 | #define ALAUDA_BULK_GET_STATUS2 0xb7
|
| 70 | #define ALAUDA_BULK_RESET_MEDIA 0xe0
|
| 71 |
|
| 72 | |
| 73 | * Port to operate on (byte 8)
|
| 74 |
|
| 75 | #define ALAUDA_PORT_XD 0x00
|
| 76 | #define ALAUDA_PORT_SM 0x01
|
| 77 |
|
| 78 | |
| 79 | * LBA and PBA are unsigned ints. Special values.
|
| 80 |
|
| 81 | #define UNDEF 0xffff
|
| 82 | #define SPARE 0xfffe
|
| 83 | #define UNUSABLE 0xfffd
|
| 84 |
|
| 85 | struct alauda_media_info {
|
| 86 | unsigned long capacity;
|
| 87 | unsigned int pagesize;
|
| 88 | unsigned int blocksize;
|
| 89 | unsigned int uzonesize;
|
| 90 | unsigned int zonesize;
|
| 91 | unsigned int blockmask;
|
| 92 |
|
| 93 | unsigned char pageshift;
|
| 94 | unsigned char blockshift;
|
| 95 | unsigned char zoneshift;
|
| 96 |
|
| 97 | u16 **lba_to_pba;
|
| 98 | u16 **pba_to_lba;
|
| 99 | };
|
| 100 |
|
| 101 | struct alauda_info {
|
| 102 | struct alauda_media_info port[2];
|
| 103 | int wr_ep;
|
| 104 |
|
| 105 | unsigned char sense_key;
|
| 106 | unsigned long sense_asc;
|
| 107 | unsigned long sense_ascq;
|
| 108 |
|
| 109 | bool media_initialized;
|
| 110 | };
|
| 111 |
|
| 112 | #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
|
| 113 | #define LSB_of(s) ((s)&0xFF)
|
| 114 | #define MSB_of(s) ((s)>>8)
|
| 115 |
|
| 116 | #define MEDIA_PORT(us) us->srb->device->lun
|
| 117 | #define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)]
|
| 118 |
|
| 119 | #define PBA_LO(pba) ((pba & 0xF) << 5)
|
| 120 | #define PBA_HI(pba) (pba >> 3)
|
| 121 | #define PBA_ZONE(pba) (pba >> 11)
|
| 122 |
|
| 123 | static int init_alauda(struct us_data *us);
|
| 124 |
|
| 125 |
|
| 126 | |
| 127 | * The table of devices
|
| 128 |
|
| 129 | #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
|
| 130 | vendorName, productName, useProtocol, useTransport, \
|
| 131 | initFunction, flags) \
|
| 132 | { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
|
| 133 | .driver_info = (flags) }
|
| 134 |
|
| 135 | static const struct usb_device_id alauda_usb_ids[] = {
|
| 136 | # include "unusual_alauda.h"
|
| 137 | { }
|
| 138 | };
|
| 139 | MODULE_DEVICE_TABLE(usb, alauda_usb_ids);
|
| 140 |
|
| 141 | #undef UNUSUAL_DEV
|
| 142 |
|
| 143 | |
| 144 | * The flags table
|
| 145 |
|
| 146 | #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
|
| 147 | vendor_name, product_name, use_protocol, use_transport, \
|
| 148 | init_function, Flags) \
|
| 149 | { \
|
| 150 | .vendorName = vendor_name, \
|
| 151 | .productName = product_name, \
|
| 152 | .useProtocol = use_protocol, \
|
| 153 | .useTransport = use_transport, \
|
| 154 | .initFunction = init_function, \
|
| 155 | }
|
| 156 |
|
| 157 | static const struct us_unusual_dev alauda_unusual_dev_list[] = {
|
| 158 | # include "unusual_alauda.h"
|
| 159 | { }
|
| 160 | };
|
| 161 |
|
| 162 | #undef UNUSUAL_DEV
|
| 163 |
|
| 164 |
|
| 165 | |
| 166 | * Media handling
|
| 167 |
|
| 168 |
|
| 169 | struct alauda_card_info {
|
| 170 | unsigned char id;
|
| 171 | unsigned char chipshift;
|
| 172 | unsigned char pageshift;
|
| 173 | unsigned char blockshift;
|
| 174 | unsigned char zoneshift;
|
| 175 | };
|
| 176 |
|
| 177 | static const struct alauda_card_info alauda_card_ids[] = {
|
| 178 |
|
| 179 | { 0x6e, 20, 8, 4, 8},
|
| 180 | { 0xe8, 20, 8, 4, 8},
|
| 181 | { 0xec, 20, 8, 4, 8},
|
| 182 | { 0x64, 21, 8, 4, 9},
|
| 183 | { 0xea, 21, 8, 4, 9},
|
| 184 | { 0x6b, 22, 9, 4, 9},
|
| 185 | { 0xe3, 22, 9, 4, 9},
|
| 186 | { 0xe5, 22, 9, 4, 9},
|
| 187 | { 0xe6, 23, 9, 4, 10},
|
| 188 | { 0x73, 24, 9, 5, 10},
|
| 189 | { 0x75, 25, 9, 5, 10},
|
| 190 | { 0x76, 26, 9, 5, 10},
|
| 191 | { 0x79, 27, 9, 5, 10},
|
| 192 | { 0x71, 28, 9, 5, 10},
|
| 193 |
|
| 194 |
|
| 195 | { 0x5d, 21, 9, 4, 8},
|
| 196 | { 0xd5, 22, 9, 4, 9},
|
| 197 | { 0xd6, 23, 9, 4, 10},
|
| 198 | { 0x57, 24, 9, 4, 11},
|
| 199 | { 0x58, 25, 9, 4, 12},
|
| 200 | { 0,}
|
| 201 | };
|
| 202 |
|
| 203 | static const struct alauda_card_info *alauda_card_find_id(unsigned char id)
|
| 204 | {
|
| 205 | int i;
|
| 206 |
|
| 207 | for (i = 0; alauda_card_ids[i].id != 0; i++)
|
| 208 | if (alauda_card_ids[i].id == id)
|
| 209 | return &(alauda_card_ids[i]);
|
| 210 | return NULL;
|
| 211 | }
|
| 212 |
|
| 213 | |
| 214 | * ECC computation.
|
| 215 |
|
| 216 |
|
| 217 | static unsigned char parity[256];
|
| 218 | static unsigned char ecc2[256];
|
| 219 |
|
| 220 | static void nand_init_ecc(void)
|
| 221 | {
|
| 222 | int i, j, a;
|
| 223 |
|
| 224 | parity[0] = 0;
|
| 225 | for (i = 1; i < 256; i++)
|
| 226 | parity[i] = (parity[i&(i-1)] ^ 1);
|
| 227 |
|
| 228 | for (i = 0; i < 256; i++) {
|
| 229 | a = 0;
|
| 230 | for (j = 0; j < 8; j++) {
|
| 231 | if (i & (1<<j)) {
|
| 232 | if ((j & 1) == 0)
|
| 233 | a ^= 0x04;
|
| 234 | if ((j & 2) == 0)
|
| 235 | a ^= 0x10;
|
| 236 | if ((j & 4) == 0)
|
| 237 | a ^= 0x40;
|
| 238 | }
|
| 239 | }
|
| 240 | ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0));
|
| 241 | }
|
| 242 | }
|
| 243 |
|
| 244 |
|
| 245 | static void nand_compute_ecc(unsigned char *data, unsigned char *ecc)
|
| 246 | {
|
| 247 | int i, j, a;
|
| 248 | unsigned char par = 0, bit, bits[8] = {0};
|
| 249 |
|
| 250 |
|
| 251 | for (i = 0; i < 256; i++) {
|
| 252 | par ^= data[i];
|
| 253 | bit = parity[data[i]];
|
| 254 | for (j = 0; j < 8; j++)
|
| 255 | if ((i & (1<<j)) == 0)
|
| 256 | bits[j] ^= bit;
|
| 257 | }
|
| 258 |
|
| 259 |
|
| 260 | a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0];
|
| 261 | ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
|
| 262 |
|
| 263 | a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4];
|
| 264 | ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
|
| 265 |
|
| 266 | ecc[2] = ecc2[par];
|
| 267 | }
|
| 268 |
|
| 269 | static int nand_compare_ecc(unsigned char *data, unsigned char *ecc)
|
| 270 | {
|
| 271 | return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
|
| 272 | }
|
| 273 |
|
| 274 | static void nand_store_ecc(unsigned char *data, unsigned char *ecc)
|
| 275 | {
|
| 276 | memcpy(data, ecc, 3);
|
| 277 | }
|
| 278 |
|
| 279 | |
| 280 | * Alauda driver
|
| 281 |
|
| 282 |
|
| 283 | |
| 284 | * Forget our PBA <---> LBA mappings for a particular port
|
| 285 |
|
| 286 | static void alauda_free_maps (struct alauda_media_info *media_info)
|
| 287 | {
|
| 288 | unsigned int shift = media_info->zoneshift
|
| 289 | + media_info->blockshift + media_info->pageshift;
|
| 290 | unsigned int num_zones = media_info->capacity >> shift;
|
| 291 | unsigned int i;
|
| 292 |
|
| 293 | if (media_info->lba_to_pba != NULL)
|
| 294 | for (i = 0; i < num_zones; i++) {
|
| 295 | kfree(media_info->lba_to_pba[i]);
|
| 296 | media_info->lba_to_pba[i] = NULL;
|
| 297 | }
|
| 298 |
|
| 299 | if (media_info->pba_to_lba != NULL)
|
| 300 | for (i = 0; i < num_zones; i++) {
|
| 301 | kfree(media_info->pba_to_lba[i]);
|
| 302 | media_info->pba_to_lba[i] = NULL;
|
| 303 | }
|
| 304 | }
|
| 305 |
|
| 306 | |
| 307 | * Returns 2 bytes of status data
|
| 308 | * The first byte describes media status, and second byte describes door status
|
| 309 |
|
| 310 | static int alauda_get_media_status(struct us_data *us, unsigned char *data)
|
| 311 | {
|
| 312 | int rc;
|
| 313 | unsigned char command;
|
| 314 |
|
| 315 | if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
|
| 316 | command = ALAUDA_GET_XD_MEDIA_STATUS;
|
| 317 | else
|
| 318 | command = ALAUDA_GET_SM_MEDIA_STATUS;
|
| 319 |
|
| 320 | rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
|
| 321 | command, 0xc0, 0, 1, data, 2);
|
| 322 |
|
| 323 | if (rc == USB_STOR_XFER_GOOD)
|
| 324 | usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]);
|
| 325 |
|
| 326 | return rc;
|
| 327 | }
|
| 328 |
|
| 329 | |
| 330 | * Clears the "media was changed" bit so that we know when it changes again
|
| 331 | * in the future.
|
| 332 |
|
| 333 | static int alauda_ack_media(struct us_data *us)
|
| 334 | {
|
| 335 | unsigned char command;
|
| 336 |
|
| 337 | if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
|
| 338 | command = ALAUDA_ACK_XD_MEDIA_CHANGE;
|
| 339 | else
|
| 340 | command = ALAUDA_ACK_SM_MEDIA_CHANGE;
|
| 341 |
|
| 342 | return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
|
| 343 | command, 0x40, 0, 1, NULL, 0);
|
| 344 | }
|
| 345 |
|
| 346 | |
| 347 | * Retrieves a 4-byte media signature, which indicates manufacturer, capacity,
|
| 348 | * and some other details.
|
| 349 |
|
| 350 | static int alauda_get_media_signature(struct us_data *us, unsigned char *data)
|
| 351 | {
|
| 352 | unsigned char command;
|
| 353 |
|
| 354 | if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
|
| 355 | command = ALAUDA_GET_XD_MEDIA_SIG;
|
| 356 | else
|
| 357 | command = ALAUDA_GET_SM_MEDIA_SIG;
|
| 358 |
|
| 359 | return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
|
| 360 | command, 0xc0, 0, 0, data, 4);
|
| 361 | }
|
| 362 |
|
| 363 | |
| 364 | * Resets the media status (but not the whole device?)
|
| 365 |
|
| 366 | static int alauda_reset_media(struct us_data *us)
|
| 367 | {
|
| 368 | unsigned char *command = us->iobuf;
|
| 369 |
|
| 370 | memset(command, 0, 9);
|
| 371 | command[0] = ALAUDA_BULK_CMD;
|
| 372 | command[1] = ALAUDA_BULK_RESET_MEDIA;
|
| 373 | command[8] = MEDIA_PORT(us);
|
| 374 |
|
| 375 | return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
|
| 376 | command, 9, NULL);
|
| 377 | }
|
| 378 |
|
| 379 | |
| 380 | * Examines the media and deduces capacity, etc.
|
| 381 |
|
| 382 | static int alauda_init_media(struct us_data *us)
|
| 383 | {
|
| 384 | unsigned char *data = us->iobuf;
|
| 385 | int ready = 0;
|
| 386 | const struct alauda_card_info *media_info;
|
| 387 | unsigned int num_zones;
|
| 388 |
|
| 389 | while (ready == 0) {
|
| 390 | msleep(20);
|
| 391 |
|
| 392 | if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
|
| 393 | return USB_STOR_TRANSPORT_ERROR;
|
| 394 |
|
| 395 | if (data[0] & 0x10)
|
| 396 | ready = 1;
|
| 397 | }
|
| 398 |
|
| 399 | usb_stor_dbg(us, "We are ready for action!\n");
|
| 400 |
|
| 401 | if (alauda_ack_media(us) != USB_STOR_XFER_GOOD)
|
| 402 | return USB_STOR_TRANSPORT_ERROR;
|
| 403 |
|
| 404 | msleep(10);
|
| 405 |
|
| 406 | if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
|
| 407 | return USB_STOR_TRANSPORT_ERROR;
|
| 408 |
|
| 409 | if (data[0] != 0x14) {
|
| 410 | usb_stor_dbg(us, "Media not ready after ack\n");
|
| 411 | return USB_STOR_TRANSPORT_ERROR;
|
| 412 | }
|
| 413 |
|
| 414 | if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD)
|
| 415 | return USB_STOR_TRANSPORT_ERROR;
|
| 416 |
|
| 417 | usb_stor_dbg(us, "Media signature: %4ph\n", data);
|
| 418 | media_info = alauda_card_find_id(data[1]);
|
| 419 | if (media_info == NULL) {
|
| 420 | pr_warn("alauda_init_media: Unrecognised media signature: %4ph\n",
|
| 421 | data);
|
| 422 | return USB_STOR_TRANSPORT_ERROR;
|
| 423 | }
|
| 424 |
|
| 425 | MEDIA_INFO(us).capacity = 1 << media_info->chipshift;
|
| 426 | usb_stor_dbg(us, "Found media with capacity: %ldMB\n",
|
| 427 | MEDIA_INFO(us).capacity >> 20);
|
| 428 |
|
| 429 | MEDIA_INFO(us).pageshift = media_info->pageshift;
|
| 430 | MEDIA_INFO(us).blockshift = media_info->blockshift;
|
| 431 | MEDIA_INFO(us).zoneshift = media_info->zoneshift;
|
| 432 |
|
| 433 | MEDIA_INFO(us).pagesize = 1 << media_info->pageshift;
|
| 434 | MEDIA_INFO(us).blocksize = 1 << media_info->blockshift;
|
| 435 | MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift;
|
| 436 |
|
| 437 | MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125;
|
| 438 | MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1;
|
| 439 |
|
| 440 | num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
|
| 441 | + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
|
| 442 | MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
|
| 443 | MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
|
| 444 | if (MEDIA_INFO(us).pba_to_lba == NULL || MEDIA_INFO(us).lba_to_pba == NULL)
|
| 445 | return USB_STOR_TRANSPORT_ERROR;
|
| 446 |
|
| 447 | if (alauda_reset_media(us) != USB_STOR_XFER_GOOD)
|
| 448 | return USB_STOR_TRANSPORT_ERROR;
|
| 449 |
|
| 450 | return USB_STOR_TRANSPORT_GOOD;
|
| 451 | }
|
| 452 |
|
| 453 | |
| 454 | * Examines the media status and does the right thing when the media has gone,
|
| 455 | * appeared, or changed.
|
| 456 |
|
| 457 | static int alauda_check_media(struct us_data *us)
|
| 458 | {
|
| 459 | struct alauda_info *info = (struct alauda_info *) us->extra;
|
| 460 | unsigned char *status = us->iobuf;
|
| 461 | int rc;
|
| 462 |
|
| 463 | rc = alauda_get_media_status(us, status);
|
| 464 | if (rc != USB_STOR_XFER_GOOD) {
|
| 465 | status[0] = 0xF0;
|
| 466 | status[1] = 0;
|
| 467 | }
|
| 468 |
|
| 469 |
|
| 470 | if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10)
|
| 471 | || ((status[1] & 0x01) == 0)) {
|
| 472 | usb_stor_dbg(us, "No media, or door open\n");
|
| 473 | alauda_free_maps(&MEDIA_INFO(us));
|
| 474 | info->sense_key = 0x02;
|
| 475 | info->sense_asc = 0x3A;
|
| 476 | info->sense_ascq = 0x00;
|
| 477 | return USB_STOR_TRANSPORT_FAILED;
|
| 478 | }
|
| 479 |
|
| 480 |
|
| 481 | if (status[0] & 0x08 || !info->media_initialized) {
|
| 482 | usb_stor_dbg(us, "Media change detected\n");
|
| 483 | alauda_free_maps(&MEDIA_INFO(us));
|
| 484 | rc = alauda_init_media(us);
|
| 485 | if (rc == USB_STOR_TRANSPORT_GOOD)
|
| 486 | info->media_initialized = true;
|
| 487 | info->sense_key = UNIT_ATTENTION;
|
| 488 | info->sense_asc = 0x28;
|
| 489 | info->sense_ascq = 0x00;
|
| 490 | return USB_STOR_TRANSPORT_FAILED;
|
| 491 | }
|
| 492 |
|
| 493 | return USB_STOR_TRANSPORT_GOOD;
|
| 494 | }
|
| 495 |
|
| 496 | |
| 497 | * Checks the status from the 2nd status register
|
| 498 | * Returns 3 bytes of status data, only the first is known
|
| 499 |
|
| 500 | static int alauda_check_status2(struct us_data *us)
|
| 501 | {
|
| 502 | int rc;
|
| 503 | unsigned char command[] = {
|
| 504 | ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2,
|
| 505 | 0, 0, 0, 0, 3, 0, MEDIA_PORT(us)
|
| 506 | };
|
| 507 | unsigned char data[3];
|
| 508 |
|
| 509 | rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
|
| 510 | command, 9, NULL);
|
| 511 | if (rc != USB_STOR_XFER_GOOD)
|
| 512 | return rc;
|
| 513 |
|
| 514 | rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
|
| 515 | data, 3, NULL);
|
| 516 | if (rc != USB_STOR_XFER_GOOD)
|
| 517 | return rc;
|
| 518 |
|
| 519 | usb_stor_dbg(us, "%3ph\n", data);
|
| 520 | if (data[0] & ALAUDA_STATUS_ERROR)
|
| 521 | return USB_STOR_XFER_ERROR;
|
| 522 |
|
| 523 | return USB_STOR_XFER_GOOD;
|
| 524 | }
|
| 525 |
|
| 526 | |
| 527 | * Gets the redundancy data for the first page of a PBA
|
| 528 | * Returns 16 bytes.
|
| 529 |
|
| 530 | static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data)
|
| 531 | {
|
| 532 | int rc;
|
| 533 | unsigned char command[] = {
|
| 534 | ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA,
|
| 535 | PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us)
|
| 536 | };
|
| 537 |
|
| 538 | rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
|
| 539 | command, 9, NULL);
|
| 540 | if (rc != USB_STOR_XFER_GOOD)
|
| 541 | return rc;
|
| 542 |
|
| 543 | return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
|
| 544 | data, 16, NULL);
|
| 545 | }
|
| 546 |
|
| 547 | |
| 548 | * Finds the first unused PBA in a zone
|
| 549 | * Returns the absolute PBA of an unused PBA, or 0 if none found.
|
| 550 |
|
| 551 | static u16 alauda_find_unused_pba(struct alauda_media_info *info,
|
| 552 | unsigned int zone)
|
| 553 | {
|
| 554 | u16 *pba_to_lba = info->pba_to_lba[zone];
|
| 555 | unsigned int i;
|
| 556 |
|
| 557 | for (i = 0; i < info->zonesize; i++)
|
| 558 | if (pba_to_lba[i] == UNDEF)
|
| 559 | return (zone << info->zoneshift) + i;
|
| 560 |
|
| 561 | return 0;
|
| 562 | }
|
| 563 |
|
| 564 | |
| 565 | * Reads the redundancy data for all PBA's in a zone
|
| 566 | * Produces lba <--> pba mappings
|
| 567 |
|
| 568 | static int alauda_read_map(struct us_data *us, unsigned int zone)
|
| 569 | {
|
| 570 | unsigned char *data = us->iobuf;
|
| 571 | int result;
|
| 572 | int i, j;
|
| 573 | unsigned int zonesize = MEDIA_INFO(us).zonesize;
|
| 574 | unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
|
| 575 | unsigned int lba_offset, lba_real, blocknum;
|
| 576 | unsigned int zone_base_lba = zone * uzonesize;
|
| 577 | unsigned int zone_base_pba = zone * zonesize;
|
| 578 | u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
|
| 579 | u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
|
| 580 | if (lba_to_pba == NULL || pba_to_lba == NULL) {
|
| 581 | result = USB_STOR_TRANSPORT_ERROR;
|
| 582 | goto error;
|
| 583 | }
|
| 584 |
|
| 585 | usb_stor_dbg(us, "Mapping blocks for zone %d\n", zone);
|
| 586 |
|
| 587 |
|
| 588 | for (i = 0; i < zonesize; i++)
|
| 589 | lba_to_pba[i] = pba_to_lba[i] = UNDEF;
|
| 590 |
|
| 591 | for (i = 0; i < zonesize; i++) {
|
| 592 | blocknum = zone_base_pba + i;
|
| 593 |
|
| 594 | result = alauda_get_redu_data(us, blocknum, data);
|
| 595 | if (result != USB_STOR_XFER_GOOD) {
|
| 596 | result = USB_STOR_TRANSPORT_ERROR;
|
| 597 | goto error;
|
| 598 | }
|
| 599 |
|
| 600 |
|
| 601 | for (j = 0; j < 16; j++)
|
| 602 | if (data[j] != 0)
|
| 603 | goto nonz;
|
| 604 | pba_to_lba[i] = UNUSABLE;
|
| 605 | usb_stor_dbg(us, "PBA %d has no logical mapping\n", blocknum);
|
| 606 | continue;
|
| 607 |
|
| 608 | nonz:
|
| 609 |
|
| 610 | for (j = 0; j < 16; j++)
|
| 611 | if (data[j] != 0xff)
|
| 612 | goto nonff;
|
| 613 | continue;
|
| 614 |
|
| 615 | nonff:
|
| 616 |
|
| 617 | if (j < 6) {
|
| 618 | usb_stor_dbg(us, "PBA %d has no logical mapping: reserved area = %02X%02X%02X%02X data status %02X block status %02X\n",
|
| 619 | blocknum,
|
| 620 | data[0], data[1], data[2], data[3],
|
| 621 | data[4], data[5]);
|
| 622 | pba_to_lba[i] = UNUSABLE;
|
| 623 | continue;
|
| 624 | }
|
| 625 |
|
| 626 | if ((data[6] >> 4) != 0x01) {
|
| 627 | usb_stor_dbg(us, "PBA %d has invalid address field %02X%02X/%02X%02X\n",
|
| 628 | blocknum, data[6], data[7],
|
| 629 | data[11], data[12]);
|
| 630 | pba_to_lba[i] = UNUSABLE;
|
| 631 | continue;
|
| 632 | }
|
| 633 |
|
| 634 |
|
| 635 | if (parity[data[6] ^ data[7]]) {
|
| 636 | printk(KERN_WARNING
|
| 637 | "alauda_read_map: Bad parity in LBA for block %d"
|
| 638 | " (%02X %02X)\n", i, data[6], data[7]);
|
| 639 | pba_to_lba[i] = UNUSABLE;
|
| 640 | continue;
|
| 641 | }
|
| 642 |
|
| 643 | lba_offset = short_pack(data[7], data[6]);
|
| 644 | lba_offset = (lba_offset & 0x07FF) >> 1;
|
| 645 | lba_real = lba_offset + zone_base_lba;
|
| 646 |
|
| 647 | |
| 648 | * Every 1024 physical blocks ("zone"), the LBA numbers
|
| 649 | * go back to zero, but are within a higher block of LBA's.
|
| 650 | * Also, there is a maximum of 1000 LBA's per zone.
|
| 651 | * In other words, in PBA 1024-2047 you will find LBA 0-999
|
| 652 | * which are really LBA 1000-1999. This allows for 24 bad
|
| 653 | * or special physical blocks per zone.
|
| 654 |
|
| 655 |
|
| 656 | if (lba_offset >= uzonesize) {
|
| 657 | printk(KERN_WARNING
|
| 658 | "alauda_read_map: Bad low LBA %d for block %d\n",
|
| 659 | lba_real, blocknum);
|
| 660 | continue;
|
| 661 | }
|
| 662 |
|
| 663 | if (lba_to_pba[lba_offset] != UNDEF) {
|
| 664 | printk(KERN_WARNING
|
| 665 | "alauda_read_map: "
|
| 666 | "LBA %d seen for PBA %d and %d\n",
|
| 667 | lba_real, lba_to_pba[lba_offset], blocknum);
|
| 668 | continue;
|
| 669 | }
|
| 670 |
|
| 671 | pba_to_lba[i] = lba_real;
|
| 672 | lba_to_pba[lba_offset] = blocknum;
|
| 673 | continue;
|
| 674 | }
|
| 675 |
|
| 676 | MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba;
|
| 677 | MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba;
|
| 678 | result = 0;
|
| 679 | goto out;
|
| 680 |
|
| 681 | error:
|
| 682 | kfree(lba_to_pba);
|
| 683 | kfree(pba_to_lba);
|
| 684 | out:
|
| 685 | return result;
|
| 686 | }
|
| 687 |
|
| 688 | |
| 689 | * Checks to see whether we have already mapped a certain zone
|
| 690 | * If we haven't, the map is generated
|
| 691 |
|
| 692 | static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone)
|
| 693 | {
|
| 694 | if (MEDIA_INFO(us).lba_to_pba[zone] == NULL
|
| 695 | || MEDIA_INFO(us).pba_to_lba[zone] == NULL)
|
| 696 | alauda_read_map(us, zone);
|
| 697 | }
|
| 698 |
|
| 699 | |
| 700 | * Erases an entire block
|
| 701 |
|
| 702 | static int alauda_erase_block(struct us_data *us, u16 pba)
|
| 703 | {
|
| 704 | int rc;
|
| 705 | unsigned char command[] = {
|
| 706 | ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba),
|
| 707 | PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us)
|
| 708 | };
|
| 709 | unsigned char buf[2];
|
| 710 |
|
| 711 | usb_stor_dbg(us, "Erasing PBA %d\n", pba);
|
| 712 |
|
| 713 | rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
|
| 714 | command, 9, NULL);
|
| 715 | if (rc != USB_STOR_XFER_GOOD)
|
| 716 | return rc;
|
| 717 |
|
| 718 | rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
|
| 719 | buf, 2, NULL);
|
| 720 | if (rc != USB_STOR_XFER_GOOD)
|
| 721 | return rc;
|
| 722 |
|
| 723 | usb_stor_dbg(us, "Erase result: %02X %02X\n", buf[0], buf[1]);
|
| 724 | return rc;
|
| 725 | }
|
| 726 |
|
| 727 | |
| 728 | * Reads data from a certain offset page inside a PBA, including interleaved
|
| 729 | * redundancy data. Returns (pagesize+64)*pages bytes in data.
|
| 730 |
|
| 731 | static int alauda_read_block_raw(struct us_data *us, u16 pba,
|
| 732 | unsigned int page, unsigned int pages, unsigned char *data)
|
| 733 | {
|
| 734 | int rc;
|
| 735 | unsigned char command[] = {
|
| 736 | ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba),
|
| 737 | PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us)
|
| 738 | };
|
| 739 |
|
| 740 | usb_stor_dbg(us, "pba %d page %d count %d\n", pba, page, pages);
|
| 741 |
|
| 742 | rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
|
| 743 | command, 9, NULL);
|
| 744 | if (rc != USB_STOR_XFER_GOOD)
|
| 745 | return rc;
|
| 746 |
|
| 747 | return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
|
| 748 | data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL);
|
| 749 | }
|
| 750 |
|
| 751 | |
| 752 | * Reads data from a certain offset page inside a PBA, excluding redundancy
|
| 753 | * data. Returns pagesize*pages bytes in data. Note that data must be big enough
|
| 754 | * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra'
|
| 755 | * trailing bytes outside this function.
|
| 756 |
|
| 757 | static int alauda_read_block(struct us_data *us, u16 pba,
|
| 758 | unsigned int page, unsigned int pages, unsigned char *data)
|
| 759 | {
|
| 760 | int i, rc;
|
| 761 | unsigned int pagesize = MEDIA_INFO(us).pagesize;
|
| 762 |
|
| 763 | rc = alauda_read_block_raw(us, pba, page, pages, data);
|
| 764 | if (rc != USB_STOR_XFER_GOOD)
|
| 765 | return rc;
|
| 766 |
|
| 767 |
|
| 768 | for (i = 0; i < pages; i++) {
|
| 769 | int dest_offset = i * pagesize;
|
| 770 | int src_offset = i * (pagesize + 64);
|
| 771 | memmove(data + dest_offset, data + src_offset, pagesize);
|
| 772 | }
|
| 773 |
|
| 774 | return rc;
|
| 775 | }
|
| 776 |
|
| 777 | |
| 778 | * Writes an entire block of data and checks status after write.
|
| 779 | * Redundancy data must be already included in data. Data should be
|
| 780 | * (pagesize+64)*blocksize bytes in length.
|
| 781 |
|
| 782 | static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data)
|
| 783 | {
|
| 784 | int rc;
|
| 785 | struct alauda_info *info = (struct alauda_info *) us->extra;
|
| 786 | unsigned char command[] = {
|
| 787 | ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba),
|
| 788 | PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us)
|
| 789 | };
|
| 790 |
|
| 791 | usb_stor_dbg(us, "pba %d\n", pba);
|
| 792 |
|
| 793 | rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
|
| 794 | command, 9, NULL);
|
| 795 | if (rc != USB_STOR_XFER_GOOD)
|
| 796 | return rc;
|
| 797 |
|
| 798 | rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data,
|
| 799 | (MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize,
|
| 800 | NULL);
|
| 801 | if (rc != USB_STOR_XFER_GOOD)
|
| 802 | return rc;
|
| 803 |
|
| 804 | return alauda_check_status2(us);
|
| 805 | }
|
| 806 |
|
| 807 | |
| 808 | * Write some data to a specific LBA.
|
| 809 |
|
| 810 | static int alauda_write_lba(struct us_data *us, u16 lba,
|
| 811 | unsigned int page, unsigned int pages,
|
| 812 | unsigned char *ptr, unsigned char *blockbuffer)
|
| 813 | {
|
| 814 | u16 pba, lbap, new_pba;
|
| 815 | unsigned char *bptr, *cptr, *xptr;
|
| 816 | unsigned char ecc[3];
|
| 817 | int i, result;
|
| 818 | unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
|
| 819 | unsigned int zonesize = MEDIA_INFO(us).zonesize;
|
| 820 | unsigned int pagesize = MEDIA_INFO(us).pagesize;
|
| 821 | unsigned int blocksize = MEDIA_INFO(us).blocksize;
|
| 822 | unsigned int lba_offset = lba % uzonesize;
|
| 823 | unsigned int new_pba_offset;
|
| 824 | unsigned int zone = lba / uzonesize;
|
| 825 |
|
| 826 | alauda_ensure_map_for_zone(us, zone);
|
| 827 |
|
| 828 | pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
|
| 829 | if (pba == 1) {
|
| 830 | |
| 831 | * Maybe it is impossible to write to PBA 1.
|
| 832 | * Fake success, but don't do anything.
|
| 833 |
|
| 834 | printk(KERN_WARNING
|
| 835 | "alauda_write_lba: avoid writing to pba 1\n");
|
| 836 | return USB_STOR_TRANSPORT_GOOD;
|
| 837 | }
|
| 838 |
|
| 839 | new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone);
|
| 840 | if (!new_pba) {
|
| 841 | printk(KERN_WARNING
|
| 842 | "alauda_write_lba: Out of unused blocks\n");
|
| 843 | return USB_STOR_TRANSPORT_ERROR;
|
| 844 | }
|
| 845 |
|
| 846 |
|
| 847 | if (pba != UNDEF) {
|
| 848 | result = alauda_read_block_raw(us, pba, 0,
|
| 849 | blocksize, blockbuffer);
|
| 850 | if (result != USB_STOR_XFER_GOOD)
|
| 851 | return result;
|
| 852 | } else {
|
| 853 | memset(blockbuffer, 0, blocksize * (pagesize + 64));
|
| 854 | }
|
| 855 |
|
| 856 | lbap = (lba_offset << 1) | 0x1000;
|
| 857 | if (parity[MSB_of(lbap) ^ LSB_of(lbap)])
|
| 858 | lbap ^= 1;
|
| 859 |
|
| 860 |
|
| 861 | for (i = 0; i < blocksize; i++) {
|
| 862 | bptr = blockbuffer + (i * (pagesize + 64));
|
| 863 | cptr = bptr + pagesize;
|
| 864 | nand_compute_ecc(bptr, ecc);
|
| 865 | if (!nand_compare_ecc(cptr+13, ecc)) {
|
| 866 | usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n",
|
| 867 | i, pba);
|
| 868 | nand_store_ecc(cptr+13, ecc);
|
| 869 | }
|
| 870 | nand_compute_ecc(bptr + (pagesize / 2), ecc);
|
| 871 | if (!nand_compare_ecc(cptr+8, ecc)) {
|
| 872 | usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n",
|
| 873 | i, pba);
|
| 874 | nand_store_ecc(cptr+8, ecc);
|
| 875 | }
|
| 876 | cptr[6] = cptr[11] = MSB_of(lbap);
|
| 877 | cptr[7] = cptr[12] = LSB_of(lbap);
|
| 878 | }
|
| 879 |
|
| 880 |
|
| 881 | xptr = ptr;
|
| 882 | for (i = page; i < page+pages; i++) {
|
| 883 | bptr = blockbuffer + (i * (pagesize + 64));
|
| 884 | cptr = bptr + pagesize;
|
| 885 | memcpy(bptr, xptr, pagesize);
|
| 886 | xptr += pagesize;
|
| 887 | nand_compute_ecc(bptr, ecc);
|
| 888 | nand_store_ecc(cptr+13, ecc);
|
| 889 | nand_compute_ecc(bptr + (pagesize / 2), ecc);
|
| 890 | nand_store_ecc(cptr+8, ecc);
|
| 891 | }
|
| 892 |
|
| 893 | result = alauda_write_block(us, new_pba, blockbuffer);
|
| 894 | if (result != USB_STOR_XFER_GOOD)
|
| 895 | return result;
|
| 896 |
|
| 897 | new_pba_offset = new_pba - (zone * zonesize);
|
| 898 | MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba;
|
| 899 | MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba;
|
| 900 | usb_stor_dbg(us, "Remapped LBA %d to PBA %d\n", lba, new_pba);
|
| 901 |
|
| 902 | if (pba != UNDEF) {
|
| 903 | unsigned int pba_offset = pba - (zone * zonesize);
|
| 904 | result = alauda_erase_block(us, pba);
|
| 905 | if (result != USB_STOR_XFER_GOOD)
|
| 906 | return result;
|
| 907 | MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF;
|
| 908 | }
|
| 909 |
|
| 910 | return USB_STOR_TRANSPORT_GOOD;
|
| 911 | }
|
| 912 |
|
| 913 | |
| 914 | * Read data from a specific sector address
|
| 915 |
|
| 916 | static int alauda_read_data(struct us_data *us, unsigned long address,
|
| 917 | unsigned int sectors)
|
| 918 | {
|
| 919 | unsigned char *buffer;
|
| 920 | u16 lba, max_lba;
|
| 921 | unsigned int page, len, offset;
|
| 922 | unsigned int blockshift = MEDIA_INFO(us).blockshift;
|
| 923 | unsigned int pageshift = MEDIA_INFO(us).pageshift;
|
| 924 | unsigned int blocksize = MEDIA_INFO(us).blocksize;
|
| 925 | unsigned int pagesize = MEDIA_INFO(us).pagesize;
|
| 926 | unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
|
| 927 | struct scatterlist *sg;
|
| 928 | int result;
|
| 929 |
|
| 930 | |
| 931 | * Since we only read in one block at a time, we have to create
|
| 932 | * a bounce buffer and move the data a piece at a time between the
|
| 933 | * bounce buffer and the actual transfer buffer.
|
| 934 | * We make this buffer big enough to hold temporary redundancy data,
|
| 935 | * which we use when reading the data blocks.
|
| 936 |
|
| 937 |
|
| 938 | len = min(sectors, blocksize) * (pagesize + 64);
|
| 939 | buffer = kmalloc(len, GFP_NOIO);
|
| 940 | if (!buffer)
|
| 941 | return USB_STOR_TRANSPORT_ERROR;
|
| 942 |
|
| 943 |
|
| 944 | lba = address >> blockshift;
|
| 945 | page = (address & MEDIA_INFO(us).blockmask);
|
| 946 | max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift);
|
| 947 |
|
| 948 | result = USB_STOR_TRANSPORT_GOOD;
|
| 949 | offset = 0;
|
| 950 | sg = NULL;
|
| 951 |
|
| 952 | while (sectors > 0) {
|
| 953 | unsigned int zone = lba / uzonesize;
|
| 954 | unsigned int lba_offset = lba - (zone * uzonesize);
|
| 955 | unsigned int pages;
|
| 956 | u16 pba;
|
| 957 | alauda_ensure_map_for_zone(us, zone);
|
| 958 |
|
| 959 |
|
| 960 | if (lba >= max_lba) {
|
| 961 | usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n",
|
| 962 | lba, max_lba);
|
| 963 | result = USB_STOR_TRANSPORT_ERROR;
|
| 964 | break;
|
| 965 | }
|
| 966 |
|
| 967 |
|
| 968 | pages = min(sectors, blocksize - page);
|
| 969 | len = pages << pageshift;
|
| 970 |
|
| 971 |
|
| 972 | pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
|
| 973 |
|
| 974 | if (pba == UNDEF) {
|
| 975 | usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
|
| 976 | pages, lba, page);
|
| 977 |
|
| 978 | |
| 979 | * This is not really an error. It just means
|
| 980 | * that the block has never been written.
|
| 981 | * Instead of returning USB_STOR_TRANSPORT_ERROR
|
| 982 | * it is better to return all zero data.
|
| 983 |
|
| 984 |
|
| 985 | memset(buffer, 0, len);
|
| 986 | } else {
|
| 987 | usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n",
|
| 988 | pages, pba, lba, page);
|
| 989 |
|
| 990 | result = alauda_read_block(us, pba, page, pages, buffer);
|
| 991 | if (result != USB_STOR_TRANSPORT_GOOD)
|
| 992 | break;
|
| 993 | }
|
| 994 |
|
| 995 |
|
| 996 | usb_stor_access_xfer_buf(buffer, len, us->srb,
|
| 997 | &sg, &offset, TO_XFER_BUF);
|
| 998 |
|
| 999 | page = 0;
|
| 1000 | lba++;
|
| 1001 | sectors -= pages;
|
| 1002 | }
|
| 1003 |
|
| 1004 | kfree(buffer);
|
| 1005 | return result;
|
| 1006 | }
|
| 1007 |
|
| 1008 | |
| 1009 | * Write data to a specific sector address
|
| 1010 |
|
| 1011 | static int alauda_write_data(struct us_data *us, unsigned long address,
|
| 1012 | unsigned int sectors)
|
| 1013 | {
|
| 1014 | unsigned char *buffer, *blockbuffer;
|
| 1015 | unsigned int page, len, offset;
|
| 1016 | unsigned int blockshift = MEDIA_INFO(us).blockshift;
|
| 1017 | unsigned int pageshift = MEDIA_INFO(us).pageshift;
|
| 1018 | unsigned int blocksize = MEDIA_INFO(us).blocksize;
|
| 1019 | unsigned int pagesize = MEDIA_INFO(us).pagesize;
|
| 1020 | struct scatterlist *sg;
|
| 1021 | u16 lba, max_lba;
|
| 1022 | int result;
|
| 1023 |
|
| 1024 | |
| 1025 | * Since we don't write the user data directly to the device,
|
| 1026 | * we have to create a bounce buffer and move the data a piece
|
| 1027 | * at a time between the bounce buffer and the actual transfer buffer.
|
| 1028 |
|
| 1029 |
|
| 1030 | len = min(sectors, blocksize) * pagesize;
|
| 1031 | buffer = kmalloc(len, GFP_NOIO);
|
| 1032 | if (!buffer)
|
| 1033 | return USB_STOR_TRANSPORT_ERROR;
|
| 1034 |
|
| 1035 | |
| 1036 | * We also need a temporary block buffer, where we read in the old data,
|
| 1037 | * overwrite parts with the new data, and manipulate the redundancy data
|
| 1038 |
|
| 1039 | blockbuffer = kmalloc_array(pagesize + 64, blocksize, GFP_NOIO);
|
| 1040 | if (!blockbuffer) {
|
| 1041 | kfree(buffer);
|
| 1042 | return USB_STOR_TRANSPORT_ERROR;
|
| 1043 | }
|
| 1044 |
|
| 1045 |
|
| 1046 | lba = address >> blockshift;
|
| 1047 | page = (address & MEDIA_INFO(us).blockmask);
|
| 1048 | max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift);
|
| 1049 |
|
| 1050 | result = USB_STOR_TRANSPORT_GOOD;
|
| 1051 | offset = 0;
|
| 1052 | sg = NULL;
|
| 1053 |
|
| 1054 | while (sectors > 0) {
|
| 1055 |
|
| 1056 | unsigned int pages = min(sectors, blocksize - page);
|
| 1057 | len = pages << pageshift;
|
| 1058 |
|
| 1059 |
|
| 1060 | if (lba >= max_lba) {
|
| 1061 | usb_stor_dbg(us, "Requested lba %u exceeds maximum %u\n",
|
| 1062 | lba, max_lba);
|
| 1063 | result = USB_STOR_TRANSPORT_ERROR;
|
| 1064 | break;
|
| 1065 | }
|
| 1066 |
|
| 1067 |
|
| 1068 | usb_stor_access_xfer_buf(buffer, len, us->srb,
|
| 1069 | &sg, &offset, FROM_XFER_BUF);
|
| 1070 |
|
| 1071 | result = alauda_write_lba(us, lba, page, pages, buffer,
|
| 1072 | blockbuffer);
|
| 1073 | if (result != USB_STOR_TRANSPORT_GOOD)
|
| 1074 | break;
|
| 1075 |
|
| 1076 | page = 0;
|
| 1077 | lba++;
|
| 1078 | sectors -= pages;
|
| 1079 | }
|
| 1080 |
|
| 1081 | kfree(buffer);
|
| 1082 | kfree(blockbuffer);
|
| 1083 | return result;
|
| 1084 | }
|
| 1085 |
|
| 1086 | |
| 1087 | * Our interface with the rest of the world
|
| 1088 |
|
| 1089 |
|
| 1090 | static void alauda_info_destructor(void *extra)
|
| 1091 | {
|
| 1092 | struct alauda_info *info = (struct alauda_info *) extra;
|
| 1093 | int port;
|
| 1094 |
|
| 1095 | if (!info)
|
| 1096 | return;
|
| 1097 |
|
| 1098 | for (port = 0; port < 2; port++) {
|
| 1099 | struct alauda_media_info *media_info = &info->port[port];
|
| 1100 |
|
| 1101 | alauda_free_maps(media_info);
|
| 1102 | kfree(media_info->lba_to_pba);
|
| 1103 | kfree(media_info->pba_to_lba);
|
| 1104 | }
|
| 1105 | }
|
| 1106 |
|
| 1107 | |
| 1108 | * Initialize alauda_info struct and find the data-write endpoint
|
| 1109 |
|
| 1110 | static int init_alauda(struct us_data *us)
|
| 1111 | {
|
| 1112 | struct alauda_info *info;
|
| 1113 | struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
|
| 1114 | nand_init_ecc();
|
| 1115 |
|
| 1116 | us->extra = kzalloc_obj(struct alauda_info, GFP_NOIO);
|
| 1117 | if (!us->extra)
|
| 1118 | return -ENOMEM;
|
| 1119 |
|
| 1120 | info = (struct alauda_info *) us->extra;
|
| 1121 | us->extra_destructor = alauda_info_destructor;
|
| 1122 |
|
| 1123 | info->wr_ep = usb_sndbulkpipe(us->pusb_dev,
|
| 1124 | altsetting->endpoint[0].desc.bEndpointAddress
|
| 1125 | & USB_ENDPOINT_NUMBER_MASK);
|
| 1126 |
|
| 1127 | return 0;
|
| 1128 | }
|
| 1129 |
|
| 1130 | static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
|
| 1131 | {
|
| 1132 | int rc;
|
| 1133 | struct alauda_info *info = (struct alauda_info *) us->extra;
|
| 1134 | unsigned char *ptr = us->iobuf;
|
| 1135 | static const unsigned char inquiry_response[36] = {
|
| 1136 | 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
|
| 1137 | };
|
| 1138 |
|
| 1139 | if (srb->cmnd[0] == INQUIRY) {
|
| 1140 | usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
|
| 1141 | memcpy(ptr, inquiry_response, sizeof(inquiry_response));
|
| 1142 | fill_inquiry_response(us, ptr, 36);
|
| 1143 | return USB_STOR_TRANSPORT_GOOD;
|
| 1144 | }
|
| 1145 |
|
| 1146 | if (srb->cmnd[0] == TEST_UNIT_READY) {
|
| 1147 | usb_stor_dbg(us, "TEST_UNIT_READY\n");
|
| 1148 | return alauda_check_media(us);
|
| 1149 | }
|
| 1150 |
|
| 1151 | if (srb->cmnd[0] == READ_CAPACITY) {
|
| 1152 | unsigned int num_zones;
|
| 1153 | unsigned long capacity;
|
| 1154 |
|
| 1155 | rc = alauda_check_media(us);
|
| 1156 | if (rc != USB_STOR_TRANSPORT_GOOD)
|
| 1157 | return rc;
|
| 1158 |
|
| 1159 | num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
|
| 1160 | + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
|
| 1161 |
|
| 1162 | capacity = num_zones * MEDIA_INFO(us).uzonesize
|
| 1163 | * MEDIA_INFO(us).blocksize;
|
| 1164 |
|
| 1165 |
|
| 1166 | ((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1);
|
| 1167 | ((__be32 *) ptr)[1] = cpu_to_be32(512);
|
| 1168 |
|
| 1169 | usb_stor_set_xfer_buf(ptr, 8, srb);
|
| 1170 | return USB_STOR_TRANSPORT_GOOD;
|
| 1171 | }
|
| 1172 |
|
| 1173 | if (srb->cmnd[0] == READ_10) {
|
| 1174 | unsigned int page, pages;
|
| 1175 |
|
| 1176 | rc = alauda_check_media(us);
|
| 1177 | if (rc != USB_STOR_TRANSPORT_GOOD)
|
| 1178 | return rc;
|
| 1179 |
|
| 1180 | page = short_pack(srb->cmnd[3], srb->cmnd[2]);
|
| 1181 | page <<= 16;
|
| 1182 | page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
|
| 1183 | pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
|
| 1184 |
|
| 1185 | usb_stor_dbg(us, "READ_10: page %d pagect %d\n", page, pages);
|
| 1186 |
|
| 1187 | return alauda_read_data(us, page, pages);
|
| 1188 | }
|
| 1189 |
|
| 1190 | if (srb->cmnd[0] == WRITE_10) {
|
| 1191 | unsigned int page, pages;
|
| 1192 |
|
| 1193 | rc = alauda_check_media(us);
|
| 1194 | if (rc != USB_STOR_TRANSPORT_GOOD)
|
| 1195 | return rc;
|
| 1196 |
|
| 1197 | page = short_pack(srb->cmnd[3], srb->cmnd[2]);
|
| 1198 | page <<= 16;
|
| 1199 | page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
|
| 1200 | pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
|
| 1201 |
|
| 1202 | usb_stor_dbg(us, "WRITE_10: page %d pagect %d\n", page, pages);
|
| 1203 |
|
| 1204 | return alauda_write_data(us, page, pages);
|
| 1205 | }
|
| 1206 |
|
| 1207 | if (srb->cmnd[0] == REQUEST_SENSE) {
|
| 1208 | usb_stor_dbg(us, "REQUEST_SENSE\n");
|
| 1209 |
|
| 1210 | memset(ptr, 0, 18);
|
| 1211 | ptr[0] = 0xF0;
|
| 1212 | ptr[2] = info->sense_key;
|
| 1213 | ptr[7] = 11;
|
| 1214 | ptr[12] = info->sense_asc;
|
| 1215 | ptr[13] = info->sense_ascq;
|
| 1216 | usb_stor_set_xfer_buf(ptr, 18, srb);
|
| 1217 |
|
| 1218 | return USB_STOR_TRANSPORT_GOOD;
|
| 1219 | }
|
| 1220 |
|
| 1221 | if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
|
| 1222 | |
| 1223 | * sure. whatever. not like we can stop the user from popping
|
| 1224 | * the media out of the device (no locking doors, etc)
|
| 1225 |
|
| 1226 | return USB_STOR_TRANSPORT_GOOD;
|
| 1227 | }
|
| 1228 |
|
| 1229 | usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
|
| 1230 | srb->cmnd[0], srb->cmnd[0]);
|
| 1231 | info->sense_key = 0x05;
|
| 1232 | info->sense_asc = 0x20;
|
| 1233 | info->sense_ascq = 0x00;
|
| 1234 | return USB_STOR_TRANSPORT_FAILED;
|
| 1235 | }
|
| 1236 |
|
| 1237 | static struct scsi_host_template alauda_host_template;
|
| 1238 |
|
| 1239 | static int alauda_probe(struct usb_interface *intf,
|
| 1240 | const struct usb_device_id *id)
|
| 1241 | {
|
| 1242 | struct us_data *us;
|
| 1243 | int result;
|
| 1244 |
|
| 1245 | result = usb_stor_probe1(&us, intf, id,
|
| 1246 | (id - alauda_usb_ids) + alauda_unusual_dev_list,
|
| 1247 | &alauda_host_template);
|
| 1248 | if (result)
|
| 1249 | return result;
|
| 1250 |
|
| 1251 | us->transport_name = "Alauda Control/Bulk";
|
| 1252 | us->transport = alauda_transport;
|
| 1253 | us->transport_reset = usb_stor_Bulk_reset;
|
| 1254 | us->max_lun = 1;
|
| 1255 |
|
| 1256 | result = usb_stor_probe2(us);
|
| 1257 | return result;
|
| 1258 | }
|
| 1259 |
|
| 1260 | static struct usb_driver alauda_driver = {
|
| 1261 | .name = DRV_NAME,
|
| 1262 | .probe = alauda_probe,
|
| 1263 | .disconnect = usb_stor_disconnect,
|
| 1264 | .suspend = usb_stor_suspend,
|
| 1265 | .resume = usb_stor_resume,
|
| 1266 | .reset_resume = usb_stor_reset_resume,
|
| 1267 | .pre_reset = usb_stor_pre_reset,
|
| 1268 | .post_reset = usb_stor_post_reset,
|
| 1269 | .id_table = alauda_usb_ids,
|
| 1270 | .soft_unbind = 1,
|
| 1271 | .no_dynamic_id = 1,
|
| 1272 | };
|
| 1273 |
|
| 1274 | module_usb_stor_driver(alauda_driver, alauda_host_template, DRV_NAME);
|