projects/linux·blob master · refs

333 lines · 14.7 KiB

1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef _SCSI_GENERIC_H
3#define _SCSI_GENERIC_H
4
5#include <linux/compiler.h>
6
7/*
8 * History:
9 * Started: Aug 9 by Lawrence Foard ([email protected]), to allow user
10 * process control of SCSI devices.
11 * Development Sponsored by Killy Corp. NY NY
12 *
13 * Original driver (sg.h):
14 * Copyright (C) 1992 Lawrence Foard
15 * Version 2 and 3 extensions to driver:
16 * Copyright (C) 1998 - 2014 Douglas Gilbert
17 *
18 * Version: 3.5.36 (20140603)
19 * This version is for 2.6 and 3 series kernels.
20 *
21 * Documentation
22 * =============
23 * A web site for the SG device driver can be found at:
24 * http://sg.danny.cz/sg [alternatively check the MAINTAINERS file]
25 * The documentation for the sg version 3 driver can be found at:
26 * http://sg.danny.cz/sg/p/sg_v3_ho.html
27 * Also see: <kernel_source>/Documentation/scsi/scsi-generic.rst
28 *
29 * For utility and test programs see: http://sg.danny.cz/sg/sg3_utils.html
30 */
31
32
33typedef struct sg_iovec /* same structure as used by readv() Linux system */
34{ /* call. It defines one scatter-gather element. */
35 void __user *iov_base; /* Starting address */
36 size_t iov_len; /* Length in bytes */
37} sg_iovec_t;
38
39
40typedef struct sg_io_hdr
41{
42 int interface_id; /* [i] 'S' for SCSI generic (required) */
43 int dxfer_direction; /* [i] data transfer direction */
44 unsigned char cmd_len; /* [i] SCSI command length */
45 unsigned char mx_sb_len; /* [i] max length to write to sbp */
46 unsigned short iovec_count; /* [i] 0 implies no scatter gather */
47 unsigned int dxfer_len; /* [i] byte count of data transfer */
48 void __user *dxferp; /* [i], [*io] points to data transfer memory
49 or scatter gather list */
50 unsigned char __user *cmdp; /* [i], [*i] points to command to perform */
51 void __user *sbp; /* [i], [*o] points to sense_buffer memory */
52 unsigned int timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */
53 unsigned int flags; /* [i] 0 -> default, see SG_FLAG... */
54 int pack_id; /* [i->o] unused internally (normally) */
55 void __user * usr_ptr; /* [i->o] unused internally */
56 unsigned char status; /* [o] scsi status */
57 unsigned char masked_status;/* [o] shifted, masked scsi status */
58 unsigned char msg_status; /* [o] messaging level data (optional) */
59 unsigned char sb_len_wr; /* [o] byte count actually written to sbp */
60 unsigned short host_status; /* [o] errors from host adapter */
61 unsigned short driver_status;/* [o] errors from software driver */
62 int resid; /* [o] dxfer_len - actual_transferred */
63 unsigned int duration; /* [o] time taken by cmd (unit: millisec) */
64 unsigned int info; /* [o] auxiliary information */
65} sg_io_hdr_t; /* 64 bytes long (on i386) */
66
67#if defined(__KERNEL__)
68#include <linux/compat.h>
69
70struct compat_sg_io_hdr {
71 compat_int_t interface_id; /* [i] 'S' for SCSI generic (required) */
72 compat_int_t dxfer_direction; /* [i] data transfer direction */
73 unsigned char cmd_len; /* [i] SCSI command length ( <= 16 bytes) */
74 unsigned char mx_sb_len; /* [i] max length to write to sbp */
75 unsigned short iovec_count; /* [i] 0 implies no scatter gather */
76 compat_uint_t dxfer_len; /* [i] byte count of data transfer */
77 compat_uint_t dxferp; /* [i], [*io] points to data transfer memory
78 or scatter gather list */
79 compat_uptr_t cmdp; /* [i], [*i] points to command to perform */
80 compat_uptr_t sbp; /* [i], [*o] points to sense_buffer memory */
81 compat_uint_t timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */
82 compat_uint_t flags; /* [i] 0 -> default, see SG_FLAG... */
83 compat_int_t pack_id; /* [i->o] unused internally (normally) */
84 compat_uptr_t usr_ptr; /* [i->o] unused internally */
85 unsigned char status; /* [o] scsi status */
86 unsigned char masked_status; /* [o] shifted, masked scsi status */
87 unsigned char msg_status; /* [o] messaging level data (optional) */
88 unsigned char sb_len_wr; /* [o] byte count actually written to sbp */
89 unsigned short host_status; /* [o] errors from host adapter */
90 unsigned short driver_status; /* [o] errors from software driver */
91 compat_int_t resid; /* [o] dxfer_len - actual_transferred */
92 compat_uint_t duration; /* [o] time taken by cmd (unit: millisec) */
93 compat_uint_t info; /* [o] auxiliary information */
94};
95#endif
96
97#define SG_INTERFACE_ID_ORIG 'S'
98
99/* Use negative values to flag difference from original sg_header structure */
100#define SG_DXFER_NONE (-1) /* e.g. a SCSI Test Unit Ready command */
101#define SG_DXFER_TO_DEV (-2) /* e.g. a SCSI WRITE command */
102#define SG_DXFER_FROM_DEV (-3) /* e.g. a SCSI READ command */
103#define SG_DXFER_TO_FROM_DEV (-4) /* treated like SG_DXFER_FROM_DEV with the
104 additional property than during indirect
105 IO the user buffer is copied into the
106 kernel buffers before the transfer */
107#define SG_DXFER_UNKNOWN (-5) /* Unknown data direction */
108
109/* following flag values can be "or"-ed together */
110#define SG_FLAG_DIRECT_IO 1 /* default is indirect IO */
111#define SG_FLAG_UNUSED_LUN_INHIBIT 2 /* default is overwrite lun in SCSI */
112 /* command block (when <= SCSI_2) */
113#define SG_FLAG_MMAP_IO 4 /* request memory mapped IO */
114#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */
115 /* user space (debug indirect IO) */
116/* defaults:: for sg driver: Q_AT_HEAD; for block layer: Q_AT_TAIL */
117#define SG_FLAG_Q_AT_TAIL 0x10
118#define SG_FLAG_Q_AT_HEAD 0x20
119
120/* following 'info' values are "or"-ed together */
121#define SG_INFO_OK_MASK 0x1
122#define SG_INFO_OK 0x0 /* no sense, host nor driver "noise" */
123#define SG_INFO_CHECK 0x1 /* something abnormal happened */
124
125#define SG_INFO_DIRECT_IO_MASK 0x6
126#define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */
127#define SG_INFO_DIRECT_IO 0x2 /* direct IO requested and performed */
128#define SG_INFO_MIXED_IO 0x4 /* part direct, part indirect IO */
129
130/*
131 * Obsolete DRIVER_SENSE driver byte
132 *
133 * Originally the SCSI midlayer would set the DRIVER_SENSE driver byte when
134 * a sense code was generated and a sense buffer was allocated.
135 * However, as nowadays every scsi command has a sense code allocated this
136 * distinction became moot as one could check the sense buffer directly.
137 * Consequently this byte is not set anymore from the midlayer, but SG will
138 * keep setting this byte to be compatible with previous releases.
139 */
140#define DRIVER_SENSE 0x08
141/* Obsolete driver_byte() declaration */
142#define driver_byte(result) (((result) >> 24) & 0xff)
143
144/*
145 * Original linux SCSI Status codes. They are shifted 1 bit right
146 * from those found in the SCSI standards.
147 */
148
149#define GOOD 0x00
150#define CHECK_CONDITION 0x01
151#define CONDITION_GOOD 0x02
152#define BUSY 0x04
153#define INTERMEDIATE_GOOD 0x08
154#define INTERMEDIATE_C_GOOD 0x0a
155#define RESERVATION_CONFLICT 0x0c
156#define COMMAND_TERMINATED 0x11
157#define QUEUE_FULL 0x14
158#define ACA_ACTIVE 0x18
159#define TASK_ABORTED 0x20
160
161/* Obsolete status_byte() declaration */
162#define sg_status_byte(result) (((result) >> 1) & 0x7f)
163
164typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */
165 int host_no; /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */
166 int channel;
167 int scsi_id; /* scsi id of target device */
168 int lun;
169 int scsi_type; /* TYPE_... defined in scsi/scsi.h */
170 short h_cmd_per_lun;/* host (adapter) maximum commands per lun */
171 short d_queue_depth;/* device (or adapter) maximum queue length */
172 int unused[2]; /* probably find a good use, set 0 for now */
173} sg_scsi_id_t; /* 32 bytes long on i386 */
174
175typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */
176 char req_state; /* 0 -> not used, 1 -> written, 2 -> ready to read */
177 char orphan; /* 0 -> normal request, 1 -> from interrupted SG_IO */
178 char sg_io_owned; /* 0 -> complete with read(), 1 -> owned by SG_IO */
179 char problem; /* 0 -> no problem detected, 1 -> error to report */
180 int pack_id; /* pack_id associated with request */
181 void __user *usr_ptr; /* user provided pointer (in new interface) */
182 unsigned int duration; /* millisecs elapsed since written (req_state==1)
183 or request duration (req_state==2) */
184 int unused;
185} sg_req_info_t; /* 20 bytes long on i386 */
186
187
188/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow.
189 [Those that only apply to the SG 2.x drivers are at the end of the file.]
190 (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */
191
192#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */
193
194/* Used to configure SCSI command transformation layer for ATAPI devices */
195/* Only supported by the ide-scsi driver */
196#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */
197 /* 3rd arg = 0 to disable transform, 1 to enable it */
198#define SG_GET_TRANSFORM 0x2205
199
200#define SG_SET_RESERVED_SIZE 0x2275 /* request a new reserved buffer size */
201#define SG_GET_RESERVED_SIZE 0x2272 /* actual size of reserved buffer */
202
203/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */
204#define SG_GET_SCSI_ID 0x2276 /* Yields fd's bus, chan, dev, lun + type */
205/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */
206
207/* Override host setting and always DMA using low memory ( <16MB on i386) */
208#define SG_SET_FORCE_LOW_DMA 0x2279 /* 0-> use adapter setting, 1-> force */
209#define SG_GET_LOW_DMA 0x227a /* 0-> use all ram for dma; 1-> low dma ram */
210
211/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which
212 tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN.
213 If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0
214 then pack_id ignored by read() and oldest readable fetched. */
215#define SG_SET_FORCE_PACK_ID 0x227b
216#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */
217
218#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */
219
220/* Yields max scatter gather tablesize allowed by current host adapter */
221#define SG_GET_SG_TABLESIZE 0x227F /* 0 implies can't do scatter gather */
222
223#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */
224
225/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */
226#define SG_SCSI_RESET 0x2284
227/* Associated values that can be given to SG_SCSI_RESET follow.
228 * SG_SCSI_RESET_NO_ESCALATE may be OR-ed to the _DEVICE, _TARGET, _BUS
229 * or _HOST reset value so only that action is attempted. */
230#define SG_SCSI_RESET_NOTHING 0
231#define SG_SCSI_RESET_DEVICE 1
232#define SG_SCSI_RESET_BUS 2
233#define SG_SCSI_RESET_HOST 3
234#define SG_SCSI_RESET_TARGET 4
235#define SG_SCSI_RESET_NO_ESCALATE 0x100
236
237/* synchronous SCSI command ioctl, (only in version 3 interface) */
238#define SG_IO 0x2285 /* similar effect as write() followed by read() */
239
240#define SG_GET_REQUEST_TABLE 0x2286 /* yields table of active requests */
241
242/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */
243#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */
244#define SG_GET_KEEP_ORPHAN 0x2288
245
246/* yields scsi midlevel's access_count for this SCSI device */
247#define SG_GET_ACCESS_COUNT 0x2289
248
249
250#define SG_SCATTER_SZ (8 * 4096)
251/* Largest size (in bytes) a single scatter-gather list element can have.
252 The value used by the driver is 'max(SG_SCATTER_SZ, PAGE_SIZE)'.
253 This value should be a power of 2 (and may be rounded up internally).
254 If scatter-gather is not supported by adapter then this value is the
255 largest data block that can be read/written by a single scsi command. */
256
257#define SG_DEFAULT_RETRIES 0
258
259/* Defaults, commented if they differ from original sg driver */
260#define SG_DEF_FORCE_PACK_ID 0
261#define SG_DEF_KEEP_ORPHAN 0
262#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */
263
264/* maximum outstanding requests, write() yields EDOM if exceeded */
265#define SG_MAX_QUEUE 16
266
267#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE /* for backward compatibility */
268
269/* Alternate style type names, "..._t" variants preferred */
270typedef struct sg_io_hdr Sg_io_hdr;
271typedef struct sg_io_vec Sg_io_vec;
272typedef struct sg_scsi_id Sg_scsi_id;
273typedef struct sg_req_info Sg_req_info;
274
275
276/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */
277/* The older SG interface based on the 'sg_header' structure follows. */
278/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */
279
280#define SG_MAX_SENSE 16 /* this only applies to the sg_header interface */
281
282struct sg_header
283{
284 int pack_len; /* [o] reply_len (ie useless), ignored as input */
285 int reply_len; /* [i] max length of expected reply (inc. sg_header) */
286 int pack_id; /* [io] id number of packet (use ints >= 0) */
287 int result; /* [o] 0==ok, else (+ve) Unix errno (best ignored) */
288 unsigned int twelve_byte:1;
289 /* [i] Force 12 byte command length for group 6 & 7 commands */
290 unsigned int target_status:5; /* [o] scsi status from target */
291 unsigned int host_status:8; /* [o] host status (see "DID" codes) */
292 unsigned int driver_status:8; /* [o] driver status+suggestion */
293 unsigned int other_flags:10; /* unused */
294 unsigned char sense_buffer[SG_MAX_SENSE]; /* [o] Output in 3 cases:
295 when target_status is CHECK_CONDITION or
296 when target_status is COMMAND_TERMINATED or
297 when (driver_status & DRIVER_SENSE) is true. */
298}; /* This structure is 36 bytes long on i386 */
299
300
301/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t
302 interface is used. They are kept for backward compatibility with
303 the original and version 2 drivers. */
304
305#define SG_SET_TIMEOUT 0x2201 /* unit: jiffies (10ms on i386) */
306#define SG_GET_TIMEOUT 0x2202 /* yield timeout as _return_ value */
307
308/* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q.
309 Each time a sg_io_hdr_t object is seen on this file descriptor, this
310 command queuing flag is set on (overriding the previous setting). */
311#define SG_GET_COMMAND_Q 0x2270 /* Yields 0 (queuing off) or 1 (on) */
312#define SG_SET_COMMAND_Q 0x2271 /* Change queuing state with 0 or 1 */
313
314/* Turn on/off error sense trace (1 and 0 respectively, default is off).
315 Try using: "# cat /proc/scsi/sg/debug" instead in the v3 driver */
316#define SG_SET_DEBUG 0x227e /* 0 -> turn off debug */
317
318#define SG_NEXT_CMD_LEN 0x2283 /* override SCSI command length with given
319 number on the next write() on this file descriptor */
320
321
322/* Defaults, commented if they differ from original sg driver */
323#ifdef __KERNEL__
324#define SG_DEFAULT_TIMEOUT_USER (60*USER_HZ) /* HZ == 'jiffies in 1 second' */
325#else
326#define SG_DEFAULT_TIMEOUT (60*HZ) /* HZ == 'jiffies in 1 second' */
327#endif
328
329#define SG_DEF_COMMAND_Q 0 /* command queuing is always on when
330 the new interface is used */
331#define SG_DEF_UNDERRUN_FLAG 0
332
333#endif