Merge tag 'tty-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Merge commit. Changes below are compared with the first parent: c0ea81b4.
Changes
55 files changed · +3039 −313
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
View filediff --git a/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt b/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
new file mode 100644
index 0000000..3fe0961
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
@@ -0,0 +1,33 @@
+* Mediatek UART APDMA Controller
+
+Required properties:
+- compatible should contain:
+ * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
+ * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
+
+- reg: The base address of the APDMA register bank.
+
+- interrupts: A single interrupt specifier.
+
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: The APDMA clock for register accesses
+
+Examples:
+
+ apdma: dma-controller@11000380 {
+ compatible = "mediatek,mt2712-uart-dma";
+ reg = <0 0x11000380 0 0x400>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 66 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "apdma";
+ #dma-cells = <1>;
+ };
+
Documentation/devicetree/bindings/serial/8250.txt
View filediff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index aeb6db4..da50321 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -51,6 +51,7 @@ Optional properties:
- tx-threshold: Specify the TX FIFO low water indication for parts with
programmable TX FIFO thresholds.
- resets : phandle + reset specifier pairs
+- overrun-throttle-ms : how long to pause uart rx when input overrun is encountered.
Note:
* fsl,ns16550:
Documentation/devicetree/bindings/serial/fsl-lpuart.txt
View filediff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
index 6bd3f2e..21483ba 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
@@ -8,6 +8,8 @@ Required properties:
on LS1021A SoC with 32-bit big-endian register organization
- "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated
on i.MX7ULP SoC with 32-bit little-endian register organization
+ - "fsl,imx8qxp-lpuart" for lpuart compatible with the one integrated
+ on i.MX8QXP SoC with 32-bit little-endian register organization
- reg : Address and length of the register set for the device
- interrupts : Should contain uart interrupt
- clocks : phandle + clock specifier pairs, one for each entry in clock-names
Documentation/devicetree/bindings/serial/lantiq_asc.txt
View filediff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
index 3acbd30..40e81a5 100644
--- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt
+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -6,8 +6,23 @@ Required properties:
- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
depends on the interrupt-parent interrupt controller.
+Optional properties:
+- clocks: Should contain frequency clock and gate clock
+- clock-names: Should be "freq" and "asc"
+
Example:
+asc0: serial@16600000 {
+ compatible = "lantiq,asc";
+ reg = <0x16600000 0x100000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
+ clock-names = "freq", "asc";
+};
+
asc1: serial@e100c00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
View filediff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index e52e16c..20232ad 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -24,6 +24,10 @@ Required properties:
- "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART.
- "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART.
- "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART.
+ - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART.
+ - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART.
+ - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART.
+ - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART.
- "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
- "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
- "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
@@ -61,13 +65,13 @@ Required properties:
- "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
- "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
- "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART,
- - "renesas,rcar-gen2-scif" for R-Car Gen2 SCIF compatible UART,
- - "renesas,rcar-gen3-scif" for R-Car Gen3 SCIF compatible UART,
- - "renesas,rcar-gen2-scifa" for R-Car Gen2 SCIFA compatible UART,
- - "renesas,rcar-gen2-scifb" for R-Car Gen2 SCIFB compatible UART,
+ - "renesas,rcar-gen2-scif" for R-Car Gen2 and RZ/G1 SCIF compatible UART,
+ - "renesas,rcar-gen3-scif" for R-Car Gen3 and RZ/G2 SCIF compatible UART,
+ - "renesas,rcar-gen2-scifa" for R-Car Gen2 and RZ/G1 SCIFA compatible UART,
+ - "renesas,rcar-gen2-scifb" for R-Car Gen2 and RZ/G1 SCIFB compatible UART,
- "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART,
- - "renesas,rcar-gen2-hscif" for R-Car Gen2 HSCIF compatible UART,
- - "renesas,rcar-gen3-hscif" for R-Car Gen3 HSCIF compatible UART,
+ - "renesas,rcar-gen2-hscif" for R-Car Gen2 and RZ/G1 HSCIF compatible UART,
+ - "renesas,rcar-gen3-hscif" for R-Car Gen3 and RZ/G2 HSCIF compatible UART,
- "renesas,scif" for generic SCIF compatible UART.
- "renesas,scifa" for generic SCIFA compatible UART.
- "renesas,scifb" for generic SCIFB compatible UART.
drivers/char/Kconfig
View filediff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 9d03b2f..2e2ffe7 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -66,6 +66,14 @@ config TTY_PRINTK
If unsure, say N.
+config TTY_PRINTK_LEVEL
+ depends on TTY_PRINTK
+ int "ttyprintk log level (1-7)"
+ range 1 7
+ default "6"
+ help
+ Printk log level to use for ttyprintk messages.
+
config PRINTER
tristate "Parallel printer support"
depends on PARPORT
drivers/char/ttyprintk.c
View filediff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 67549ce..88808db 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -37,6 +37,8 @@ static struct ttyprintk_port tpk_port;
*/
#define TPK_STR_SIZE 508 /* should be bigger then max expected line length */
#define TPK_MAX_ROOM 4096 /* we could assume 4K for instance */
+#define TPK_PREFIX KERN_SOH __stringify(CONFIG_TTY_PRINTK_LEVEL)
+
static int tpk_curr;
static char tpk_buffer[TPK_STR_SIZE + 4];
@@ -45,7 +47,7 @@ static void tpk_flush(void)
{
if (tpk_curr > 0) {
tpk_buffer[tpk_curr] = '\0';
- pr_info("[U] %s\n", tpk_buffer);
+ printk(TPK_PREFIX "[U] %s\n", tpk_buffer);
tpk_curr = 0;
}
}
drivers/gnss/serial.c
View filediff --git a/drivers/gnss/serial.c b/drivers/gnss/serial.c
index 31e891f..def64b3 100644
--- a/drivers/gnss/serial.c
+++ b/drivers/gnss/serial.c
@@ -65,7 +65,7 @@ static int gnss_serial_write_raw(struct gnss_device *gdev,
/* write is only buffered synchronously */
ret = serdev_device_write(serdev, buf, count, MAX_SCHEDULE_TIMEOUT);
- if (ret < 0)
+ if (ret < 0 || ret < count)
return ret;
/* FIXME: determine if interrupted? */
drivers/gnss/sirf.c
View filediff --git a/drivers/gnss/sirf.c b/drivers/gnss/sirf.c
index 2c22836..226f6e6 100644
--- a/drivers/gnss/sirf.c
+++ b/drivers/gnss/sirf.c
@@ -85,7 +85,7 @@ static int sirf_write_raw(struct gnss_device *gdev, const unsigned char *buf,
/* write is only buffered synchronously */
ret = serdev_device_write(serdev, buf, count, MAX_SCHEDULE_TIMEOUT);
- if (ret < 0)
+ if (ret < 0 || ret < count)
return ret;
/* FIXME: determine if interrupted? */
drivers/tty/hvc/hvc_opal.c
View filediff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 77baf89..c664125 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -353,7 +353,7 @@ void __init hvc_opal_init_early(void)
if (!opal)
return;
for_each_child_of_node(opal, np) {
- if (!strcmp(np->name, "serial")) {
+ if (of_node_name_eq(np, "serial")) {
stdout_node = np;
break;
}
drivers/tty/hvc/hvc_vio.c
View filediff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index 59eaa62..6de6d4a 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -371,20 +371,11 @@ device_initcall(hvc_vio_init); /* after drivers/tty/hvc/hvc_console.c */
void __init hvc_vio_init_early(void)
{
const __be32 *termno;
- const char *name;
const struct hv_ops *ops;
/* find the boot console from /chosen/stdout */
- if (!of_stdout)
- return;
- name = of_get_property(of_stdout, "name", NULL);
- if (!name) {
- printk(KERN_WARNING "stdout node missing 'name' property!\n");
- return;
- }
-
/* Check if it's a virtual terminal */
- if (strncmp(name, "vty", 3) != 0)
+ if (!of_node_name_prefix(of_stdout, "vty"))
return;
termno = of_get_property(of_stdout, "reg", NULL);
if (termno == NULL)
drivers/tty/n_hdlc.c
View filediff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index dabb391..99460af 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -612,7 +612,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
}
/* no data */
- if (file->f_flags & O_NONBLOCK) {
+ if (tty_io_nonblock(tty, file)) {
ret = -EAGAIN;
break;
}
@@ -679,7 +679,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
if (tbuf)
break;
- if (file->f_flags & O_NONBLOCK) {
+ if (tty_io_nonblock(tty, file)) {
error = -EAGAIN;
break;
}
drivers/tty/n_r3964.c
View filediff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 749a608..f75696f 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -1085,7 +1085,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
pMsg = remove_msg(pInfo, pClient);
if (pMsg == NULL) {
/* no messages available. */
- if (file->f_flags & O_NONBLOCK) {
+ if (tty_io_nonblock(tty, file)) {
ret = -EAGAIN;
goto unlock;
}
drivers/tty/n_tty.c
View filediff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 3ad4602..5dc9686 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1702,7 +1702,7 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
down_read(&tty->termios_rwsem);
- while (1) {
+ do {
/*
* When PARMRK is set, each input char may take up to 3 chars
* in the read buf; reduce the buffer space avail by 3x
@@ -1744,7 +1744,7 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp,
fp += n;
count -= n;
rcvd += n;
- }
+ } while (!test_bit(TTY_LDISC_CHANGING, &tty->flags));
tty->receive_room = room;
@@ -2211,7 +2211,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
break;
if (!timeout)
break;
- if (file->f_flags & O_NONBLOCK) {
+ if (tty_io_nonblock(tty, file)) {
retval = -EAGAIN;
break;
}
@@ -2365,7 +2365,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
}
if (!nr)
break;
- if (file->f_flags & O_NONBLOCK) {
+ if (tty_io_nonblock(tty, file)) {
retval = -EAGAIN;
break;
}
drivers/tty/serdev/core.c
View filediff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 9db93f5..a0ac16e 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -15,6 +15,7 @@
#include <linux/of_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
+#include <linux/sched.h>
#include <linux/serdev.h>
#include <linux/slab.h>
@@ -216,6 +217,21 @@ void serdev_device_write_wakeup(struct serdev_device *serdev)
}
EXPORT_SYMBOL_GPL(serdev_device_write_wakeup);
+/**
+ * serdev_device_write_buf() - write data asynchronously
+ * @serdev: serdev device
+ * @buf: data to be written
+ * @count: number of bytes to write
+ *
+ * Write data to the device asynchronously.
+ *
+ * Note that any accepted data has only been buffered by the controller; use
+ * serdev_device_wait_until_sent() to make sure the controller write buffer
+ * has actually been emptied.
+ *
+ * Return: The number of bytes written (less than count if not enough room in
+ * the write buffer), or a negative errno on errors.
+ */
int serdev_device_write_buf(struct serdev_device *serdev,
const unsigned char *buf, size_t count)
{
@@ -228,17 +244,42 @@ int serdev_device_write_buf(struct serdev_device *serdev,
}
EXPORT_SYMBOL_GPL(serdev_device_write_buf);
+/**
+ * serdev_device_write() - write data synchronously
+ * @serdev: serdev device
+ * @buf: data to be written
+ * @count: number of bytes to write
+ * @timeout: timeout in jiffies, or 0 to wait indefinitely
+ *
+ * Write data to the device synchronously by repeatedly calling
+ * serdev_device_write() until the controller has accepted all data (unless
+ * interrupted by a timeout or a signal).
+ *
+ * Note that any accepted data has only been buffered by the controller; use
+ * serdev_device_wait_until_sent() to make sure the controller write buffer
+ * has actually been emptied.
+ *
+ * Note that this function depends on serdev_device_write_wakeup() being
+ * called in the serdev driver write_wakeup() callback.
+ *
+ * Return: The number of bytes written (less than count if interrupted),
+ * -ETIMEDOUT or -ERESTARTSYS if interrupted before any bytes were written, or
+ * a negative errno on errors.
+ */
int serdev_device_write(struct serdev_device *serdev,
const unsigned char *buf, size_t count,
- unsigned long timeout)
+ long timeout)
{
struct serdev_controller *ctrl = serdev->ctrl;
+ int written = 0;
int ret;
- if (!ctrl || !ctrl->ops->write_buf ||
- (timeout && !serdev->ops->write_wakeup))
+ if (!ctrl || !ctrl->ops->write_buf || !serdev->ops->write_wakeup)
return -EINVAL;
+ if (timeout == 0)
+ timeout = MAX_SCHEDULE_TIMEOUT;
+
mutex_lock(&serdev->write_lock);
do {
reinit_completion(&serdev->write_comp);
@@ -247,14 +288,29 @@ int serdev_device_write(struct serdev_device *serdev,
if (ret < 0)
break;
+ written += ret;
buf += ret;
count -= ret;
- } while (count &&
- (timeout = wait_for_completion_timeout(&serdev->write_comp,
- timeout)));
+ if (count == 0)
+ break;
+
+ timeout = wait_for_completion_interruptible_timeout(&serdev->write_comp,
+ timeout);
+ } while (timeout > 0);
mutex_unlock(&serdev->write_lock);
- return ret < 0 ? ret : (count ? -ETIMEDOUT : 0);
+
+ if (ret < 0)
+ return ret;
+
+ if (timeout <= 0 && written == 0) {
+ if (timeout == -ERESTARTSYS)
+ return -ERESTARTSYS;
+ else
+ return -ETIMEDOUT;
+ }
+
+ return written;
}
EXPORT_SYMBOL_GPL(serdev_device_write);
drivers/tty/serial/8250/8250_aspeed_vuart.c
View filediff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 435bec4..0438d9a 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -5,6 +5,10 @@
* Copyright (C) 2016 Jeremy Kerr <[email protected]>, IBM Corp.
* Copyright (C) 2006 Arnd Bergmann <[email protected]>, IBM Corp.
*/
+#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
#include <linux/device.h>
#include <linux/module.h>
#include <linux/of_address.h>
@@ -293,7 +297,7 @@ static int aspeed_vuart_handle_irq(struct uart_port *port)
if (lsr & UART_LSR_THRE)
serial8250_tx_chars(up);
- spin_unlock_irqrestore(&port->lock, flags);
+ uart_unlock_and_check_sysrq(port, flags);
return 1;
}
drivers/tty/serial/8250/8250_core.c
View filediff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 94f3e1c..189ab12 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -942,6 +942,21 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
return NULL;
}
+static void serial_8250_overrun_backoff_work(struct work_struct *work)
+{
+ struct uart_8250_port *up =
+ container_of(to_delayed_work(work), struct uart_8250_port,
+ overrun_backoff);
+ struct uart_port *port = &up->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ up->ier |= UART_IER_RLSI | UART_IER_RDI;
+ up->port.read_status_mask |= UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
/**
* serial8250_register_8250_port - register a serial port
* @up: serial port template
@@ -1056,6 +1071,16 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
ret = 0;
}
}
+
+ /* Initialise interrupt backoff work if required */
+ if (up->overrun_backoff_time_ms > 0) {
+ uart->overrun_backoff_time_ms = up->overrun_backoff_time_ms;
+ INIT_DELAYED_WORK(&uart->overrun_backoff,
+ serial_8250_overrun_backoff_work);
+ } else {
+ uart->overrun_backoff_time_ms = 0;
+ }
+
mutex_unlock(&serial_mutex);
return ret;
drivers/tty/serial/8250/8250_fsl.c
View filediff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index 6640a4c..aa0e216 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -1,4 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
+#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
#include <linux/serial_reg.h>
#include <linux/serial_8250.h>
@@ -45,8 +49,29 @@ int fsl8250_handle_irq(struct uart_port *port)
lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);
- if (lsr & (UART_LSR_DR | UART_LSR_BI))
+ /* Process incoming characters first */
+ if ((lsr & (UART_LSR_DR | UART_LSR_BI)) &&
+ (up->ier & (UART_IER_RLSI | UART_IER_RDI))) {
lsr = serial8250_rx_chars(up, lsr);
+ }
+
+ /* Stop processing interrupts on input overrun */
+ if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) {
+ unsigned long delay;
+
+ up->ier = port->serial_in(port, UART_IER);
+ if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
+ port->ops->stop_rx(port);
+ } else {
+ /* Keep restarting the timer until
+ * the input overrun subsides.
+ */
+ cancel_delayed_work(&up->overrun_backoff);
+ }
+
+ delay = msecs_to_jiffies(up->overrun_backoff_time_ms);
+ schedule_delayed_work(&up->overrun_backoff, delay);
+ }
serial8250_modem_status(up);
@@ -54,7 +79,7 @@ int fsl8250_handle_irq(struct uart_port *port)
serial8250_tx_chars(up);
up->lsr_saved_flags = orig_lsr;
- spin_unlock_irqrestore(&up->port.lock, flags);
+ uart_unlock_and_check_sysrq(&up->port, flags);
return 1;
}
EXPORT_SYMBOL_GPL(fsl8250_handle_irq);
drivers/tty/serial/8250/8250_mtk.c
View filediff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index c3f933d..e2c4076 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -14,6 +14,10 @@
#include <linux/pm_runtime.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
+#include <linux/console.h>
+#include <linux/dma-mapping.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include "8250.h"
@@ -22,12 +26,172 @@
#define UART_MTK_SAMPLE_POINT 0x0b /* Sample point register */
#define MTK_UART_RATE_FIX 0x0d /* UART Rate Fix Register */
+#define MTK_UART_DMA_EN 0x13 /* DMA Enable register */
+#define MTK_UART_DMA_EN_TX 0x2
+#define MTK_UART_DMA_EN_RX 0x5
+
+#define MTK_UART_TX_SIZE UART_XMIT_SIZE
+#define MTK_UART_RX_SIZE 0x8000
+#define MTK_UART_TX_TRIGGER 1
+#define MTK_UART_RX_TRIGGER MTK_UART_RX_SIZE
+
+#ifdef CONFIG_SERIAL_8250_DMA
+enum dma_rx_status {
+ DMA_RX_START = 0,
+ DMA_RX_RUNNING = 1,
+ DMA_RX_SHUTDOWN = 2,
+};
+#endif
+
struct mtk8250_data {
int line;
+ unsigned int rx_pos;
struct clk *uart_clk;
struct clk *bus_clk;
+ struct uart_8250_dma *dma;
+#ifdef CONFIG_SERIAL_8250_DMA
+ enum dma_rx_status rx_status;
+#endif
};
+#ifdef CONFIG_SERIAL_8250_DMA
+static void mtk8250_rx_dma(struct uart_8250_port *up);
+
+static void mtk8250_dma_rx_complete(void *param)
+{
+ struct uart_8250_port *up = param;
+ struct uart_8250_dma *dma = up->dma;
+ struct mtk8250_data *data = up->port.private_data;
+ struct tty_port *tty_port = &up->port.state->port;
+ struct dma_tx_state state;
+ unsigned char *ptr;
This diff is incomplete. Download the complete patch.
drivers/tty/serial/8250/8250_of.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/8250/8250_omap.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/8250/8250_port.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/amba-pl011.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/fsl_lpuart.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/imx.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/lantiq.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/max310x.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/mvebu-uart.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/pch_uart.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/pic32_uart.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/pmac_zilog.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/qcom_geni_serial.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/samsung.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/sccnxp.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/serial-tegra.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/serial_core.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/sh-sci.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/suncore.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/sunsu.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/uartlite.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/serial/xilinx_uartps.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/sysrq.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/tty_io.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/tty_ldisc.c
View fileThis diff is incomplete. Download the complete patch.
drivers/tty/tty_ldsem.c
View fileThis diff is incomplete. Download the complete patch.
include/linux/font.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/lantiq.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/serdev.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/serial_8250.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/serial_core.h
View fileThis diff is incomplete. Download the complete patch.
include/linux/tty.h
View fileThis diff is incomplete. Download the complete patch.
lib/fonts/Kconfig
View fileThis diff is incomplete. Download the complete patch.
lib/fonts/Makefile
View fileThis diff is incomplete. Download the complete patch.
lib/fonts/font_ter16x32.c
View fileThis diff is incomplete. Download the complete patch.
lib/fonts/fonts.c
View fileThis diff is incomplete. Download the complete patch.