[PATCH] Fix and enable EDAC sysfs operation
Changes
2 files changed · +221 −618
| File | Status | Add | Del | Content |
|---|---|---|---|---|
| Documentation/drivers/edac/edac.txt | modified | +27 | −125 | View file |
| drivers/edac/edac_mc.c | modified | +194 | −493 | View file |
Only the first 600 diff lines are shown. Download the complete patch.
Documentation/drivers/edac/edac.txt
View filediff --git a/Documentation/drivers/edac/edac.txt b/Documentation/drivers/edac/edac.txt
index 70d96a6..7b3d969 100644
--- a/Documentation/drivers/edac/edac.txt
+++ b/Documentation/drivers/edac/edac.txt
@@ -35,15 +35,14 @@ the vendor should tie the parity status bits to 0 if they do not intend
to generate parity. Some vendors do not do this, and thus the parity bit
can "float" giving false positives.
-The PCI Parity EDAC device has the ability to "skip" known flaky
-cards during the parity scan. These are set by the parity "blacklist"
-interface in the sysfs for PCI Parity. (See the PCI section in the sysfs
-section below.) There is also a parity "whitelist" which is used as
-an explicit list of devices to scan, while the blacklist is a list
-of devices to skip.
+[There are patches in the kernel queue which will allow for storage of
+quirks of PCI devices reporting false parity positives. The 2.6.18
+kernel should have those patches included. When that becomes available,
+then EDAC will be patched to utilize that information to "skip" such
+devices.]
-EDAC will have future error detectors that will be added or integrated
-into EDAC in the following list:
+EDAC will have future error detectors that will be integrated with
+EDAC or added to it, in the following list:
MCE Machine Check Exception
MCA Machine Check Architecture
@@ -93,22 +92,24 @@ EDAC lives in the /sys/devices/system/edac directory. Within this directory
there currently reside 2 'edac' components:
mc memory controller(s) system
- pci PCI status system
+ pci PCI control and status system
============================================================================
Memory Controller (mc) Model
First a background on the memory controller's model abstracted in EDAC.
-Each mc device controls a set of DIMM memory modules. These modules are
+Each 'mc' device controls a set of DIMM memory modules. These modules are
laid out in a Chip-Select Row (csrowX) and Channel table (chX). There can
-be multiple csrows and two channels.
+be multiple csrows and multiple channels.
Memory controllers allow for several csrows, with 8 csrows being a typical value.
Yet, the actual number of csrows depends on the electrical "loading"
of a given motherboard, memory controller and DIMM characteristics.
Dual channels allows for 128 bit data transfers to the CPU from memory.
+Some newer chipsets allow for more than 2 channels, like Fully Buffered DIMMs
+(FB-DIMMs). The following example will assume 2 channels:
Channel 0 Channel 1
@@ -234,23 +235,15 @@ Polling period control file:
The time period, in milliseconds, for polling for error information.
Too small a value wastes resources. Too large a value might delay
necessary handling of errors and might loose valuable information for
- locating the error. 1000 milliseconds (once each second) is about
- right for most uses.
+ locating the error. 1000 milliseconds (once each second) is the current
+ default. Systems which require all the bandwidth they can get, may
+ increase this.
LOAD TIME: module/kernel parameter: poll_msec=[0|1]
RUN TIME: echo "1000" >/sys/devices/system/edac/mc/poll_msec
-Module Version read-only attribute file:
-
- 'mc_version'
-
- The EDAC CORE module's version and compile date are shown here to
- indicate what EDAC is running.
-
-
-
============================================================================
'mcX' DIRECTORIES
@@ -284,35 +277,6 @@ Seconds since last counter reset control file:
-DIMM capability attribute file:
-
- 'edac_capability'
-
- The EDAC (Error Detection and Correction) capabilities/modes of
- the memory controller hardware.
-
-
-DIMM Current Capability attribute file:
-
- 'edac_current_capability'
-
- The EDAC capabilities available with the hardware
- configuration. This may not be the same as "EDAC capability"
- if the correct memory is not used. If a memory controller is
- capable of EDAC, but DIMMs without check bits are in use, then
- Parity, SECDED, S4ECD4ED capabilities will not be available
- even though the memory controller might be capable of those
- modes with the proper memory loaded.
-
-
-Memory Type supported on this controller attribute file:
-
- 'supported_mem_type'
-
- This attribute file displays the memory type, usually
- buffered and unbuffered DIMMs.
-
-
Memory Controller name attribute file:
'mc_name'
@@ -321,16 +285,6 @@ Memory Controller name attribute file:
that is being utilized.
-Memory Controller Module name attribute file:
-
- 'module_name'
-
- This attribute file displays the memory controller module name,
- version and date built. The name of the memory controller
- hardware - some drivers work with multiple controllers and
- this field shows which hardware is present.
-
-
Total memory managed by this memory controller attribute file:
'size_mb'
@@ -432,6 +386,9 @@ Memory Type attribute file:
This attribute file will display what type of memory is currently
on this csrow. Normally, either buffered or unbuffered memory.
+ Examples:
+ Registered-DDR
+ Unbuffered-DDR
EDAC Mode of operation attribute file:
@@ -446,8 +403,13 @@ Device type attribute file:
'dev_type'
- This attribute file will display what type of DIMM device is
- being utilized. Example: x4
+ This attribute file will display what type of DRAM device is
+ being utilized on this DIMM.
+ Examples:
+ x1
+ x2
+ x4
+ x8
Channel 0 CE Count attribute file:
@@ -522,10 +484,10 @@ SYSTEM LOGGING
If logging for UEs and CEs are enabled then system logs will have
error notices indicating errors that have been detected:
-MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
+EDAC MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
channel 1 "DIMM_B1": amd76x_edac
-MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
+EDAC MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
channel 1 "DIMM_B1": amd76x_edac
@@ -610,64 +572,4 @@ Parity Count:
-PCI Device Whitelist:
-
- 'pci_parity_whitelist'
-
- This control file allows for an explicit list of PCI devices to be
- scanned for parity errors. Only devices found on this list will
- be examined. The list is a line of hexadecimal VENDOR and DEVICE
- ID tuples:
-
- 1022:7450,1434:16a6
-
- One or more can be inserted, separated by a comma.
-
- To write the above list doing the following as one command line:
-
- echo "1022:7450,1434:16a6"
- > /sys/devices/system/edac/pci/pci_parity_whitelist
-
-
-
- To display what the whitelist is, simply 'cat' the same file.
-
-
-PCI Device Blacklist:
-
- 'pci_parity_blacklist'
-
- This control file allows for a list of PCI devices to be
- skipped for scanning.
- The list is a line of hexadecimal VENDOR and DEVICE ID tuples:
-
- 1022:7450,1434:16a6
-
- One or more can be inserted, separated by a comma.
-
- To write the above list doing the following as one command line:
-
- echo "1022:7450,1434:16a6"
- > /sys/devices/system/edac/pci/pci_parity_blacklist
-
-
- To display what the whitelist currently contains,
- simply 'cat' the same file.
-
=======================================================================
-
-PCI Vendor and Devices IDs can be obtained with the lspci command. Using
-the -n option lspci will display the vendor and device IDs. The system
-administrator will have to determine which devices should be scanned or
-skipped.
-
-
-
-The two lists (white and black) are prioritized. blacklist is the lower
-priority and will NOT be utilized when a whitelist has been set.
-Turn OFF a whitelist by an empty echo command:
-
- echo > /sys/devices/system/edac/pci/pci_parity_whitelist
-
-and any previous blacklist will be utilized.
-
drivers/edac/edac_mc.c
View filediff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 3a7cfe8..4bde30b 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -1,6 +1,6 @@
/*
* edac_mc kernel module
- * (C) 2005 Linux Networx (http://lnxi.com)
+ * (C) 2005, 2006 Linux Networx (http://lnxi.com)
* This file may be distributed under the terms of the
* GNU General Public License.
*
@@ -33,13 +33,8 @@
#include <asm/edac.h>
#include "edac_mc.h"
-#define EDAC_MC_VERSION "Ver: 2.0.0 " __DATE__
+#define EDAC_MC_VERSION "Ver: 2.0.1 " __DATE__
-/* For now, disable the EDAC sysfs code. The sysfs interface that EDAC
- * presents to user space needs more thought, and is likely to change
- * substantially.
- */
-#define DISABLE_EDAC_SYSFS
#ifdef CONFIG_EDAC_DEBUG
/* Values of 0 to 4 will generate output */
@@ -64,31 +59,12 @@ static int check_pci_parity = 0; /* default YES check PCI parity */
static int panic_on_pci_parity; /* default no panic on PCI Parity */
static atomic_t pci_parity_count = ATOMIC_INIT(0);
-/* Structure of the whitelist and blacklist arrays */
-struct edac_pci_device_list {
- unsigned int vendor; /* Vendor ID */
- unsigned int device; /* Deviice ID */
-};
-
-#define MAX_LISTED_PCI_DEVICES 32
-
-/* List of PCI devices (vendor-id:device-id) that should be skipped */
-static struct edac_pci_device_list pci_blacklist[MAX_LISTED_PCI_DEVICES];
-static int pci_blacklist_count;
-
-/* List of PCI devices (vendor-id:device-id) that should be scanned */
-static struct edac_pci_device_list pci_whitelist[MAX_LISTED_PCI_DEVICES];
-static int pci_whitelist_count ;
-
-#ifndef DISABLE_EDAC_SYSFS
static struct kobject edac_pci_kobj; /* /sys/devices/system/edac/pci */
static struct completion edac_pci_kobj_complete;
-#endif /* DISABLE_EDAC_SYSFS */
#endif /* CONFIG_PCI */
/* START sysfs data and methods */
-#ifndef DISABLE_EDAC_SYSFS
static const char *mem_types[] = {
[MEM_EMPTY] = "Empty",
@@ -147,18 +123,10 @@ static struct completion edac_memctrl_kobj_complete;
* /sys/devices/system/edac/mc;
* data structures and methods
*/
-#if 0
-static ssize_t memctrl_string_show(void *ptr, char *buffer)
-{
- char *value = (char*) ptr;
- return sprintf(buffer, "%s\n", value);
-}
-#endif
-
static ssize_t memctrl_int_show(void *ptr, char *buffer)
{
int *value = (int*) ptr;
- return sprintf(buffer, "%d\n", *value);
+ return sprintf(buffer, "%u\n", *value);
}
static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
@@ -224,11 +192,6 @@ struct memctrl_dev_attribute attr_##_name = { \
.store = _store, \
};
-/* cwrow<id> attribute f*/
-#if 0
-MEMCTRL_STRING_ATTR(mc_version,EDAC_MC_VERSION,S_IRUGO,memctrl_string_show,NULL);
-#endif
-
/* csrow<id> control files */
MEMCTRL_ATTR(panic_on_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
MEMCTRL_ATTR(log_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
@@ -257,8 +220,6 @@ static struct kobj_type ktype_memctrl = {
.default_attrs = (struct attribute **) memctrl_attr,
};
-#endif /* DISABLE_EDAC_SYSFS */
-
/* Initialize the main sysfs entries for edac:
* /sys/devices/system/edac
*
@@ -268,11 +229,6 @@ static struct kobj_type ktype_memctrl = {
* !0 FAILURE
*/
static int edac_sysfs_memctrl_setup(void)
-#ifdef DISABLE_EDAC_SYSFS
-{
- return 0;
-}
-#else
{
int err=0;
@@ -304,7 +260,6 @@ static int edac_sysfs_memctrl_setup(void)
return err;
}
-#endif /* DISABLE_EDAC_SYSFS */
/*
* MC teardown:
@@ -312,7 +267,6 @@ static int edac_sysfs_memctrl_setup(void)
*/
static void edac_sysfs_memctrl_teardown(void)
{
-#ifndef DISABLE_EDAC_SYSFS
debugf0("MC: " __FILE__ ": %s()\n", __func__);
/* Unregister the MC's kobject and wait for reference count to reach
@@ -324,144 +278,9 @@ static void edac_sysfs_memctrl_teardown(void)
/* Unregister the 'edac' object */
sysdev_class_unregister(&edac_class);
-#endif /* DISABLE_EDAC_SYSFS */
}
#ifdef CONFIG_PCI
-
-#ifndef DISABLE_EDAC_SYSFS
-
-/*
- * /sys/devices/system/edac/pci;
- * data structures and methods
- */
-
-struct list_control {
- struct edac_pci_device_list *list;
- int *count;
-};
-
-#if 0
-/* Output the list as: vendor_id:device:id<,vendor_id:device_id> */
-static ssize_t edac_pci_list_string_show(void *ptr, char *buffer)
-{
- struct list_control *listctl;
- struct edac_pci_device_list *list;
- char *p = buffer;
- int len=0;
- int i;
-
- listctl = ptr;
- list = listctl->list;
-
- for (i = 0; i < *(listctl->count); i++, list++ ) {
- if (len > 0)
- len += snprintf(p + len, (PAGE_SIZE-len), ",");
-
- len += snprintf(p + len,
- (PAGE_SIZE-len),
- "%x:%x",
- list->vendor,list->device);
- }
-
- len += snprintf(p + len,(PAGE_SIZE-len), "\n");
- return (ssize_t) len;
-}
-
-/**
- *
- * Scan string from **s to **e looking for one 'vendor:device' tuple
- * where each field is a hex value
- *
- * return 0 if an entry is NOT found
- * return 1 if an entry is found
- * fill in *vendor_id and *device_id with values found
- *
- * In both cases, make sure *s has been moved forward toward *e
- */
-static int parse_one_device(const char **s,const char **e,
- unsigned int *vendor_id, unsigned int *device_id)
-{
- const char *runner, *p;
-
- /* if null byte, we are done */
- if (!**s) {
- (*s)++; /* keep *s moving */
- return 0;
- }
-
- /* skip over newlines & whitespace */
- if ((**s == '\n') || isspace(**s)) {
- (*s)++;
- return 0;
- }
-
- if (!isxdigit(**s)) {
- (*s)++;
- return 0;
- }
-
- /* parse vendor_id */
- runner = *s;
-
- while (runner < *e) {
- /* scan for vendor:device delimiter */
- if (*runner == ':') {
- *vendor_id = simple_strtol((char*) *s, (char**) &p, 16);
- runner = p + 1;
- break;
- }
-
- runner++;
- }
-
- if (!isxdigit(*runner)) {
- *s = ++runner;
- return 0;
- }
-
- /* parse device_id */
- if (runner < *e) {
- *device_id = simple_strtol((char*)runner, (char**)&p, 16);
- runner = p;
- }
-
- *s = runner;
- return 1;
-}
-
-static ssize_t edac_pci_list_string_store(void *ptr, const char *buffer,
- size_t count)
-{
- struct list_control *listctl;
- struct edac_pci_device_list *list;
- unsigned int vendor_id, device_id;
- const char *s, *e;
- int *index;
-
- s = (char*)buffer;
- e = s + count;
- listctl = ptr;
- list = listctl->list;
- index = listctl->count;
- *index = 0;
-
- while (*index < MAX_LISTED_PCI_DEVICES) {
- if (parse_one_device(&s,&e,&vendor_id,&device_id)) {
- list[ *index ].vendor = vendor_id;
- list[ *index ].device = device_id;
- (*index)++;
- }
-
- /* check for all data consume */
- if (s >= e)
- break;
- }
-
- return count;
-}
-
-#endif
static ssize_t edac_pci_int_show(void *ptr, char *buffer)
{
int *value = ptr;
@@ -529,31 +348,6 @@ struct edac_pci_dev_attribute edac_pci_attr_##_name = { \
.store = _store, \
};
-#if 0
-static struct list_control pci_whitelist_control = {
- .list = pci_whitelist,
- .count = &pci_whitelist_count
-};
-
-static struct list_control pci_blacklist_control = {
- .list = pci_blacklist,
- .count = &pci_blacklist_count
-};
-
-/* whitelist attribute */
-EDAC_PCI_STRING_ATTR(pci_parity_whitelist,
- &pci_whitelist_control,
- S_IRUGO|S_IWUSR,
- edac_pci_list_string_show,
- edac_pci_list_string_store);
-
-EDAC_PCI_STRING_ATTR(pci_parity_blacklist,
- &pci_blacklist_control,
- S_IRUGO|S_IWUSR,
- edac_pci_list_string_show,
- edac_pci_list_string_store);
-#endif
-
/* PCI Parity control files */
EDAC_PCI_ATTR(check_pci_parity, S_IRUGO|S_IWUSR, edac_pci_int_show,
edac_pci_int_store);
@@ -582,18 +376,11 @@ static struct kobj_type ktype_edac_pci = {
.default_attrs = (struct attribute **) edac_pci_attr,
};
-#endif /* DISABLE_EDAC_SYSFS */
-
/**
* edac_sysfs_pci_setup()
*
*/
static int edac_sysfs_pci_setup(void)
-#ifdef DISABLE_EDAC_SYSFS
-{
- return 0;
-}
-#else
{
int err;
@@ -617,16 +404,13 @@ static int edac_sysfs_pci_setup(void)
return err;
}
-#endif /* DISABLE_EDAC_SYSFS */
static void edac_sysfs_pci_teardown(void)
{
-#ifndef DISABLE_EDAC_SYSFS
debugf0("%s()\n", __func__);
init_completion(&edac_pci_kobj_complete);
kobject_unregister(&edac_pci_kobj);
wait_for_completion(&edac_pci_kobj_complete);
-#endif
}
@@ -756,36 +540,6 @@ static void edac_pci_dev_parity_test(struct pci_dev *dev)
}
/*
- * check_dev_on_list: Scan for a PCI device on a white/black list
- * @list: an EDAC &edac_pci_device_list white/black list pointer
- * @free_index: index of next free entry on the list
- * @pci_dev: PCI Device pointer
- *
- * see if list contains the device.
- *
- * Returns: 0 not found
- * 1 found on list
- */
-static int check_dev_on_list(struct edac_pci_device_list *list,
- int free_index, struct pci_dev *dev)
-{
- int i;
- int rc = 0; /* Assume not found */
- unsigned short vendor=dev->vendor;
This diff is incomplete. Download the complete patch.