Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

b24174b0 · Linus Torvalds <[email protected]> · 2013-02-21 14:54:55 -08:00

Pull non-critical ARM SoC bug fixes from Arnd Bergmann:
 "Bug fixes that did not make it into v3.8, mostly because they were not
  considered important enough, and in some cases because bugs only show
  up in combination with other patches destined for 3.9.  This includes
  a few larger patches for GPIO on the Marvell PXA platform and a lot of
  Samsung specific bug fixes, as well as a series from Arnd to fix older
  build warnings."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ
  ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350
  scripts/sortextable: silence script output
  ARM: s3c: i2c: add platform_device forward declaration
  ARM: mvebu: allow selecting mvebu without Armada XP
  ARM: pick Versatile by default for !MMU
  ARM: integrator: fix build with INTEGRATOR_AP off
  ARM: integrator/versatile: fix NOMMU warnings
  ARM: sa1100: don't warn about mach/ide.h
  ARM: shmobile: fix defconfig warning on CONFIG_USB
  ARM: w90x900: fix legacy assembly syntax
  ARM: samsung: fix assembly syntax for new gas
  ARM: disable virt_to_bus/virt_to_bus almost everywhere
  ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
  ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
  ARM: SAMSUNG: Silence empty switch warning in sdhci.h
  ARM: msm: proc_comm_boot_wait should not be __init
  arm: vt8500: Update MAINTAINERS entry for arch-vt8500
  ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU
  ARM: S5PV210: Fix early uart output in fifo mode
  ...

Commit: b24174b0cbbe383c5bb6097aeb24480b8fd2d338
Parents: 7ed214ac · be8fd292

Merge commit. Changes below are compared with the first parent: 7ed214ac.

Changes

71 files changed · +252 −152

File	Status	Add	Del	Content
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt	modified	+6	−6	View file
MAINTAINERS	modified	+16	−3	View file
arch/arm/Kconfig	modified	+6	−1	View file
arch/arm/boot/dts/at91sam9n12.dtsi	modified	+0	−8	View file
arch/arm/boot/dts/at91sam9x5.dtsi	modified	+2	−8	View file
arch/arm/boot/dts/dove.dtsi	modified	+2	−0	View file
arch/arm/boot/dts/exynos4210.dtsi	modified	+3	−3	View file
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi	modified	+1	−1	View file
arch/arm/boot/dts/exynos4x12.dtsi	modified	+4	−4	View file
arch/arm/boot/dts/exynos5440.dtsi	modified	+2	−2	View file
arch/arm/boot/dts/imx6q.dtsi	modified	+1	−1	View file
arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts	modified	+1	−1	View file
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts	modified	+1	−1	View file
arch/arm/configs/marzen_defconfig	modified	+0	−1	View file
arch/arm/configs/mvebu_defconfig	modified	+2	−0	View file
arch/arm/configs/shark_defconfig	modified	+0	−1	View file
arch/arm/configs/u8500_defconfig	modified	+3	−3	View file
arch/arm/include/asm/dma.h	modified	+1	−1	View file
arch/arm/include/asm/memory.h	modified	+2	−0	View file
arch/arm/mach-exynos/common.c	modified	+6	−4	View file
arch/arm/mach-exynos/pm.c	modified	+4	−2	View file
arch/arm/mach-imx/Kconfig	modified	+1	−1	View file
arch/arm/mach-imx/clk-imx25.c	modified	+3	−0	View file
arch/arm/mach-imx/clk-imx27.c	modified	+6	−3	View file
arch/arm/mach-integrator/common.h	modified	+0	−5	View file
arch/arm/mach-integrator/core.c	modified	+1	−1	View file
arch/arm/mach-integrator/integrator_ap.c	modified	+2	−2	View file
arch/arm/mach-integrator/integrator_cp.c	modified	+1	−1	View file
arch/arm/mach-msm/proc_comm.h	modified	+1	−1	View file
arch/arm/mach-mvebu/Makefile	modified	+3	−2	View file
arch/arm/mach-omap2/omap-wakeupgen.c	modified	+7	−7	View file
arch/arm/mach-omap2/timer.c	modified	+1	−1	View file
arch/arm/mach-omap2/twl-common.c	modified	+2	−1	View file
arch/arm/mach-pxa/include/mach/palmtreo.h	modified	+3	−2	View file
arch/arm/mach-pxa/include/mach/smemc.h	modified	+1	−0	View file
arch/arm/mach-pxa/palmtreo.c	modified	+60	−10	View file
arch/arm/mach-pxa/smemc.c	modified	+14	−1	View file
arch/arm/mach-pxa/spitz.c	modified	+2	−2	View file
arch/arm/mach-s3c24xx/Kconfig	modified	+2	−0	View file
arch/arm/mach-s3c24xx/common-s3c2443.c	modified	+1	−1	View file
arch/arm/mach-s3c24xx/common.c	modified	+1	−1	View file
arch/arm/mach-s3c24xx/include/mach/debug-macro.S	modified	+6	−6	View file
arch/arm/mach-s3c24xx/include/mach/entry-macro.S	modified	+2	−2	View file
arch/arm/mach-s3c24xx/mach-osiris.c	modified	+1	−0	View file
arch/arm/mach-s3c24xx/pm-h1940.S	modified	+1	−1	View file
arch/arm/mach-s3c24xx/pm-s3c2412.c	modified	+2	−1	View file
arch/arm/mach-s3c24xx/pm-s3c2416.c	modified	+2	−1	View file
arch/arm/mach-s3c24xx/sleep-s3c2410.S	modified	+6	−6	View file
arch/arm/mach-s3c24xx/sleep-s3c2412.S	modified	+6	−6	View file
arch/arm/mach-s3c64xx/pm.c	modified	+2	−1	View file
arch/arm/mach-s5p64x0/pm.c	modified	+2	−2	View file
arch/arm/mach-s5pv210/include/mach/uncompress.h	modified	+2	−0	View file
arch/arm/mach-s5pv210/pm.c	modified	+2	−2	View file
arch/arm/mach-sa1100/lart.c	modified	+0	−3	View file
arch/arm/mach-ux500/cpu.c	modified	+2	−4	View file
arch/arm/mach-ux500/cpuidle.c	modified	+3	−1	View file
arch/arm/mach-versatile/Kconfig	modified	+5	−0	View file
arch/arm/mach-versatile/core.c	modified	+1	−1	View file
arch/arm/mach-w90x900/include/mach/entry-macro.S	modified	+2	−2	View file
arch/arm/plat-omap/dma.c	modified	+1	−1	View file
arch/arm/plat-orion/mpp.c	modified	+1	−1	View file
arch/arm/plat-samsung/include/plat/debug-macro.S	modified	+9	−9	View file
arch/arm/plat-samsung/include/plat/fimc-core.h	modified	+2	−0	View file
arch/arm/plat-samsung/include/plat/sdhci.h	modified	+2	−0	View file
arch/arm/plat-samsung/pm.c	modified	+5	−2	View file
arch/arm/plat-spear/Kconfig	modified	+1	−0	View file
drivers/gpio/gpio-samsung.c	modified	+3	−3	View file
drivers/mfd/vexpress-sysreg.c	modified	+1	−1	View file
drivers/pinctrl/pinctrl-samsung.c	modified	+2	−2	View file
include/linux/platform_data/i2c-s3c2410.h	modified	+2	−0	View file
scripts/sortextable.h	modified	+1	−1	View file

Only the first 600 diff lines are shown. Download the complete patch.

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt

View file

diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index e97a278..4598a47 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -7,9 +7,9 @@ on-chip controllers onto these pads.
 
 Required Properties:
 - compatible: should be one of the following.
-  - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller.
-  - "samsung,pinctrl-exynos4x12": for Exynos4x12 compatible pin-controller.
-  - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller.
+  - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
+  - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
+  - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
   the address space it occupies.
@@ -142,7 +142,7 @@ the following format 'pinctrl{n}' where n is a unique number for the alias.
 Example: A pin-controller node with pin banks:
 
 	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 
@@ -185,7 +185,7 @@ Example: A pin-controller node with pin banks:
 Example 1: A pin-controller node with pin groups.
 
 	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 
@@ -230,7 +230,7 @@ Example 1: A pin-controller node with pin groups.
 Example 2: A pin-controller node with external wakeup interrupt controller node.
 
 	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>
 

MAINTAINERS

View file

diff --git a/MAINTAINERS b/MAINTAINERS
index f5b9851..22b754a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1256,12 +1256,17 @@ M:	Tony Prisk <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-vt8500/
+F:	drivers/clocksource/vt8500_timer.c
+F:	drivers/gpio/gpio-vt8500.c
+F:	drivers/mmc/host/wmt-sdmmc.c
+F:	drivers/pwm/pwm-vt8500.c
+F:	drivers/rtc/rtc-vt8500.c
+F:	drivers/tty/serial/vt8500_serial.c
+F:	drivers/usb/host/ehci-vt8500.c
+F:	drivers/usb/host/uhci-platform.c
 F:	drivers/video/vt8500lcdfb.*
 F:	drivers/video/wm8505fb*
 F:	drivers/video/wmt_ge_rops.*
-F:	drivers/tty/serial/vt8500_serial.c
-F:	drivers/rtc/rtc-vt8500.c
-F:	drivers/mmc/host/wmt-sdmmc.c
 
 ARM/ZIPIT Z2 SUPPORT
 M:	Marek Vasut <[email protected]>
@@ -1270,6 +1275,14 @@ S:	Maintained
 F:	arch/arm/mach-pxa/z2.c
 F:	arch/arm/mach-pxa/include/mach/z2.h
 
+ARM/ZYNQ ARCHITECTURE
+M:	Michal Simek <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+W:	http://wiki.xilinx.com
+T:	git git://git.xilinx.com/linux-xlnx.git
+S:	Supported
+F:	arch/arm/mach-zynq/
+
 ARM64 PORT (AARCH64 ARCHITECTURE)
 M:	Catalin Marinas <[email protected]>
 M:	Will Deacon <[email protected]>

arch/arm/Kconfig

View file

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f410cb1..09238c8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -260,7 +260,8 @@ config MMU
 #
 choice
 	prompt "ARM system type"
-	default ARCH_MULTIPLATFORM
+	default ARCH_VERSATILE if !MMU
+	default ARCH_MULTIPLATFORM if MMU
 
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
@@ -1449,6 +1450,10 @@ config ISA_DMA
 	bool
 	select ISA_DMA_API
 
+config ARCH_NO_VIRT_TO_BUS
+	def_bool y
+	depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
+
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool

arch/arm/boot/dts/at91sam9n12.dtsi

View file

diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 80e29c6..4801717 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -324,8 +324,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
 				interrupts = <5 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
@@ -335,8 +333,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x4000>;
 				interrupts = <6 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
@@ -346,8 +342,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x4000>;
 				interrupts = <7 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
@@ -357,8 +351,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x4000>;
 				interrupts = <8 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
 				status = "disabled";

arch/arm/boot/dts/at91sam9x5.dtsi

View file

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 8ecca69..d112c3a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -197,9 +197,9 @@
 				};
 
 				usart3 {
-					pinctrl_uart3: usart3-0 {
+					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<2 23 0x2 0x1	/* PC22 periph B with pullup */
+							<2 22 0x2 0x1	/* PC22 periph B with pullup */
 							 2 23 0x2 0x0>;	/* PC23 periph B */
 					};
 
@@ -402,8 +402,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x200>;
 				interrupts = <5 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
@@ -413,8 +411,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x200>;
 				interrupts = <6 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
@@ -424,8 +420,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x200>;
 				interrupts = <7 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";

arch/arm/boot/dts/dove.dtsi

View file

diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 42eac1f..740630f 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -93,6 +93,7 @@
 			reg = <0xd0400 0x20>;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <12>, <13>, <14>, <60>;
 		};
 
@@ -103,6 +104,7 @@
 			reg = <0xd0420 0x20>;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <61>;
 		};
 

arch/arm/boot/dts/exynos4210.dtsi

View file

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index e31bfc4..2feffc7 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -48,13 +48,13 @@
 	};
 
 	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>;
 
@@ -66,7 +66,7 @@
 	};
 
 	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x03860000 0x1000>;
 	};
 

arch/arm/boot/dts/exynos4x12-pinctrl.dtsi

View file

diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 8e6115a..099cec7 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -661,7 +661,7 @@
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
+			samsung,pin-function = <4>;
 			samsung,pin-pud = <4>;
 			samsung,pin-drv = <3>;
 		};

arch/arm/boot/dts/exynos4x12.dtsi

View file

diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 179a62e..9a87806 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -37,13 +37,13 @@
 	};
 
 	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>;
 
@@ -55,14 +55,14 @@
 	};
 
 	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x03860000 0x1000>;
 		interrupt-parent = <&combiner>;
 		interrupts = <10 0>;
 	};
 
 	pinctrl_3: pinctrl@106E0000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x106E0000 0x1000>;
 		interrupts = <0 72 0>;
 	};

arch/arm/boot/dts/exynos5440.dtsi

View file

diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 024269d..5f3562a 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -86,7 +86,7 @@
 	};
 
 	pinctrl {
-		compatible = "samsung,pinctrl-exynos5440";
+		compatible = "samsung,exynos5440-pinctrl";
 		reg = <0xE0000 0x1000>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
@@ -154,6 +154,6 @@
 	rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
-		interrupts = <0 16 0>, <0 17 0>;
+		interrupts = <0 17 0>, <0 16 0>;
 	};
 };

arch/arm/boot/dts/imx6q.dtsi

View file

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index d6265ca..ff1205e 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -866,7 +866,7 @@
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
-				clocks = <&clks 117>, <&clks 117>, <&clks 177>;
+				clocks = <&clks 117>, <&clks 117>, <&clks 190>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};

arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts

View file

diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index a3d37ec..7318717 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -70,7 +70,7 @@
 		compatible = "arm,sp805", "arm,primecell";
 		status = "disabled";
 		reg = <0 0x2b060000 0 0x1000>;
-		interrupts = <98>;
+		interrupts = <0 98 4>;
 		clocks = <&oscclk7>;
 		clock-names = "apb_pclk";
 	};

arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts

View file

diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index cf8071a..dfe371e 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -72,7 +72,7 @@
 	wdt@2a490000 {
 		compatible = "arm,sp805", "arm,primecell";
 		reg = <0 0x2a490000 0 0x1000>;
-		interrupts = <98>;
+		interrupts = <0 98 4>;
 		clocks = <&oscclk6a>, <&oscclk6a>;
 		clock-names = "wdogclk", "apb_pclk";
 	};

arch/arm/configs/marzen_defconfig

View file

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 728a43c..afb17d6 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -83,7 +83,6 @@ CONFIG_USB=y
 CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y

arch/arm/configs/mvebu_defconfig

View file

diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index b5bc96c..cbd91bc 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -33,6 +33,8 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_MV64XXX=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y

arch/arm/configs/shark_defconfig

View file

diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index caa07db..e319b2c 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -73,7 +73,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set

arch/arm/configs/u8500_defconfig

View file

diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 231dca6..426270f 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -66,9 +66,9 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_AB8500_BM=y
-CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_AB8500_BM is not set
+# CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL is not set
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_MFD_STMPE=y

arch/arm/include/asm/dma.h

View file

diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index 5694a0d..58b8c6a 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -105,7 +105,7 @@ extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
  */
 extern void __set_dma_addr(unsigned int chan, void *addr);
 #define set_dma_addr(chan, addr)				\
-	__set_dma_addr(chan, bus_to_virt(addr))
+	__set_dma_addr(chan, (void *)__bus_to_virt(addr))
 
 /* Set the DMA byte count for this channel
  *

arch/arm/include/asm/memory.h

View file

diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 64c770d..57870ab 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -245,6 +245,7 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define __bus_to_pfn(x)	__phys_to_pfn(x)
 #endif
 
+#ifdef CONFIG_VIRT_TO_BUS
 static inline __deprecated unsigned long virt_to_bus(void *x)
 {
 	return __virt_to_bus((unsigned long)x);
@@ -254,6 +255,7 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 {
 	return (void *)__bus_to_virt(x);
 }
+#endif
 
 /*
  * Conversion between a struct page and a physical address.

arch/arm/mach-exynos/common.c

View file

diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 1a89824..0c7e3ad 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -299,6 +299,7 @@ void exynos4_restart(char mode, const char *cmd)
 
 void exynos5_restart(char mode, const char *cmd)
 {
+	struct device_node *np;
 	u32 val;
 	void __iomem *addr;
 
@@ -306,8 +307,9 @@ void exynos5_restart(char mode, const char *cmd)
 		val = 0x1;
 		addr = EXYNOS_SWRESET;
 	} else if (of_machine_is_compatible("samsung,exynos5440")) {
-		val = (0x10 << 20) | (0x1 << 16);
-		addr = EXYNOS5440_SWRESET;
+		np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
+		addr = of_iomap(np, 0) + 0xcc;
+		val = (0xfff << 20) | (0x1 << 16);
 	} else {
 		pr_err("%s: cannot support non-DT\n", __func__);
 		return;
@@ -1031,8 +1033,8 @@ static int __init exynos_init_irq_eint(void)
 	 * interrupt support code here can be completely removed.
 	 */
 	static const struct of_device_id exynos_pinctrl_ids[] = {
-		{ .compatible = "samsung,pinctrl-exynos4210", },
-		{ .compatible = "samsung,pinctrl-exynos4x12", },
+		{ .compatible = "samsung,exynos4210-pinctrl", },
+		{ .compatible = "samsung,exynos4x12-pinctrl", },
 	};
 	struct device_node *pctrl_np, *wkup_np;
 	const char *wkup_compat = "samsung,exynos4210-wakeup-eint";

arch/arm/mach-exynos/pm.c

View file

diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index b9b539c..5106ab8 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -91,8 +91,8 @@ static int exynos_cpu_suspend(unsigned long arg)
 	/* issue the standby signal into the pm unit. */
 	cpu_do_idle();
 
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 static void exynos_pm_prepare(void)
@@ -282,6 +282,8 @@ static void exynos_pm_resume(void)
 	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
 		tmp |= S5P_CENTRAL_LOWPWR_CFG;
 		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+		/* clear the wakeup state register */
+		__raw_writel(0x0, S5P_WAKEUP_STAT);
 		/* No need to perform below restore code */
 		goto early_wakeup;
 	}

arch/arm/mach-imx/Kconfig

View file

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0a2349d..64b40a4 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -488,7 +488,7 @@ config MACH_MX31ADS_WM1133_EV1
 	bool "Support Wolfson Microelectronics 1133-EV1 module"
 	depends on MACH_MX31ADS
 	depends on MFD_WM8350_I2C
-	depends on REGULATOR_WM8350
+	depends on REGULATOR_WM8350 = y
 	select MFD_WM8350_CONFIG_MODE_0
 	select MFD_WM8352_CONFIG_MODE_0
 	help

arch/arm/mach-imx/clk-imx25.c

View file

diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index 2c570cd..69858c7 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -224,6 +224,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
 
 	clk_prepare_enable(clk[emi_ahb]);
 
+	/* Clock source for gpt must be derived from AHB */
+	clk_set_parent(clk[per5_sel], clk[ahb]);
+
 	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
 

arch/arm/mach-imx/clk-imx27.c

View file

diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 1ffe3b5..e30369a 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -228,9 +228,12 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1");
 	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2");
 	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2");
-	clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0");
-	clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1");
-	clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2");
+	clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.0");
+	clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx27-cspi.0");
+	clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.1");
+	clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx27-cspi.1");
+	clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.2");
+	clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx27-cspi.2");
 	clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0");
 	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
 	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");

arch/arm/mach-integrator/common.h

View file

diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
index 79197d8..7251665 100644
--- a/arch/arm/mach-integrator/common.h
+++ b/arch/arm/mach-integrator/common.h
@@ -1,10 +1,5 @@
 #include <linux/amba/serial.h>
-#ifdef CONFIG_ARCH_INTEGRATOR_AP
 extern struct amba_pl010_data ap_uart_data;
-#else
-/* Not used without Integrator/AP support anyway */
-struct amba_pl010_data ap_uart_data {};
-#endif
 void integrator_init_early(void);
 int integrator_init(bool is_cp);
 void integrator_reserve(void);

arch/arm/mach-integrator/core.c

View file

diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 39c060f..81461d2 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -71,7 +71,7 @@ int __init integrator_init(bool is_cp)
 	 * hard-code them. The Integator/CP and forward have proper cell IDs.
 	 * Else we leave them undefined to the bus driver can autoprobe them.
 	 */
-	if (!is_cp) {
+	if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) {
 		rtc_device.periphid	= 0x00041030;
 		uart0_device.periphid	= 0x00041010;
 		uart1_device.periphid	= 0x00041010;

arch/arm/mach-integrator/integrator_ap.c

View file

diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 11e2a41..592c168 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -94,7 +94,7 @@ void __iomem *ap_syscon_base;
  * f1b00000	1b000000	GPIO
  */
 
-static struct map_desc ap_io_desc[] __initdata = {
+static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
 	{
 		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
 		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),
@@ -613,7 +613,6 @@ static struct map_desc ap_io_desc_atag[] __initdata = {
 static void __init ap_map_io_atag(void)
 {
 	iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag));
-	ap_syscon_base = __io_address(INTEGRATOR_SC_BASE);
 	ap_map_io();
 }
 
@@ -685,6 +684,7 @@ static void __init ap_init(void)
 
 	platform_device_register(&cfi_flash_device);
 
+	ap_syscon_base = __io_address(INTEGRATOR_SC_BASE);
 	sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
 	for (i = 0; i < 4; i++) {