Merge tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

cff11abe · Linus Torvalds <[email protected]> · 2020-06-06 12:00:25 -07:00

Pull Kbuild updates from Masahiro Yamada:

 - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32

 - ensure to rebuild all objects when the compiler is upgraded

 - exclude system headers from dependency tracking and fixdep processing

 - fix potential bit-size mismatch between the kernel and BPF user-mode
   helper

 - add the new syntax 'userprogs' to build user-space programs for the
   target architecture (the same arch as the kernel)

 - compile user-space sample code under samples/ for the target arch
   instead of the host arch

 - make headers_install fail if a CONFIG option is leaked to user-space

 - sanitize the output format of scripts/checkstack.pl

 - handle ARM 'push' instruction in scripts/checkstack.pl

 - error out before modpost if a module name conflict is found

 - error out when multiple directories are passed to M= because this
   feature is broken for a long time

 - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info

 - a lot of cleanups of modpost

 - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
   second pass of modpost

 - do not run the second pass of modpost if nothing in modules is
   updated

 - install modules.builtin(.modinfo) by 'make install' as well as by
   'make modules_install' because it is useful even when
   CONFIG_MODULES=n

 - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
   to allow users to use alternatives such as pigz, pbzip2, etc.

* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
  kbuild: add variables for compression tools
  Makefile: install modules.builtin even if CONFIG_MODULES=n
  mksysmap: Fix the mismatch of '.L' symbols in System.map
  kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
  modpost: change elf_info->size to size_t
  modpost: remove is_vmlinux() helper
  modpost: strip .o from modname before calling new_module()
  modpost: set have_vmlinux in new_module()
  modpost: remove mod->skip struct member
  modpost: add mod->is_vmlinux struct member
  modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
  modpost: remove mod->is_dot_o struct member
  modpost: move -d option in scripts/Makefile.modpost
  modpost: remove -s option
  modpost: remove get_next_text() and make {grab,release_}file static
  modpost: use read_text_file() and get_line() for reading text files
  modpost: avoid false-positive file open error
  modpost: fix potential mmap'ed file overrun in get_src_version()
  modpost: add read_text_file() and get_line() helpers
  modpost: do not call get_modinfo() for vmlinux(.o)
  ...

Commit: cff11abeca78aa782378401ca2800bd2194aa14e
Parents: 6f2dc3d3 · 8dfb61dc

Merge commit. Changes below are compared with the first parent: 6f2dc3d3.

Changes

60 files changed · +883 −757

File	Status	Add	Del	Content
.gitignore	modified	+1	−0	View file
Documentation/dontdiff	modified	+1	−0	View file
Documentation/kbuild/makefiles.rst	modified	+137	−50	View file
Documentation/kbuild/modules.rst	modified	+0	−12	View file
Kconfig	modified	+0	−2	View file
Makefile	modified	+126	−91	View file
arch/arm/Makefile	modified	+0	−2	View file
arch/arm/boot/deflate_xip_data.sh	modified	+1	−1	View file
arch/arm64/Makefile	modified	+0	−2	View file
arch/h8300/boot/compressed/Makefile	modified	+1	−1	View file
arch/hexagon/Makefile	modified	+1	−1	View file
arch/ia64/Makefile	modified	+1	−1	View file
arch/m68k/Makefile	modified	+4	−4	View file
arch/parisc/Makefile	modified	+1	−1	View file
arch/um/Makefile	modified	+1	−1	View file
arch/um/drivers/Makefile	modified	+2	−2	View file
arch/unicore32/lib/Makefile	modified	+2	−2	View file
include/linux/kconfig.h	modified	+2	−0	View file
init/Kconfig	modified	+27	−3	View file
init/Makefile	modified	+1	−1	View file
kernel/gen_kheaders.sh	modified	+1	−1	View file
lib/Kconfig.debug	modified	+17	−0	View file
net/bpfilter/Kconfig	modified	+5	−1	View file
net/bpfilter/Makefile	modified	+4	−7	View file
samples/Kconfig	modified	+22	−4	View file
samples/Makefile	modified	+4	−1	View file
samples/auxdisplay/Makefile	modified	+2	−9	View file
samples/connector/Makefile	modified	+3	−9	View file
samples/hidraw/Makefile	modified	+3	−6	View file
samples/mei/Makefile	modified	+3	−6	View file
samples/pidfd/Makefile	modified	+4	−4	View file
samples/seccomp/Makefile	modified	+3	−39	View file
samples/timers/Makefile	modified	+3	−14	View file
samples/uhid/.gitignore	added	+2	−0	View file
samples/uhid/Makefile	modified	+3	−6	View file
samples/uhid/uhid-example.c	modified	+2	−2	View file
samples/vfs/Makefile	modified	+3	−8	View file
samples/watchdog/Makefile	modified	+2	−8	View file
scripts/Kbuild.include	modified	+1	−1	View file
scripts/Makefile.build	modified	+38	−29	View file
scripts/Makefile.clean	modified	+1	−1	View file
scripts/Makefile.host	modified	+2	−2	View file
scripts/Makefile.lib	modified	+41	−38	View file
scripts/Makefile.modpost	modified	+53	−22	View file
scripts/Makefile.package	modified	+4	−4	View file
scripts/Makefile.userprogs	added	+45	−0	View file
scripts/basic/fixdep.c	modified	+1	−1	View file
scripts/checkstack.pl	modified	+59	−28	View file
scripts/gcc-plugins/Makefile	modified	+1	−1	View file
scripts/headers_install.sh	modified	+6	−5	View file
scripts/link-vmlinux.sh	modified	+0	−2	View file
scripts/mkcompile_h	modified	+1	−2	View file
scripts/mksysmap	modified	+1	−1	View file
scripts/mod/modpost.c	modified	+185	−201	View file
scripts/mod/modpost.h	modified	+7	−12	View file
scripts/mod/sumversion.c	modified	+20	−97	View file
scripts/modules-check.sh	modified	+13	−3	View file
scripts/package/buildtar	modified	+3	−3	View file
scripts/xz_wrap.sh	modified	+1	−1	View file
usr/include/Makefile	modified	+5	−1	View file

Only the first 600 diff lines are shown. Download the complete patch.

.gitignore

View file

diff --git a/.gitignore b/.gitignore
index 2258e90..87b9dd8 100644
--- a/.gitignore
+++ b/.gitignore
@@ -56,6 +56,7 @@ modules.order
 /linux
 /vmlinux
 /vmlinux.32
+/vmlinux.symvers
 /vmlinux-gdb.py
 /vmlinuz
 /System.map

Documentation/dontdiff

View file

diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 72fc2e9..ef9519c 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -251,6 +251,7 @@ vmlinux-*
 vmlinux.aout
 vmlinux.bin.all
 vmlinux.lds
+vmlinux.symvers
 vmlinuz
 voffset.h
 vsyscall.lds

Documentation/kbuild/makefiles.rst

View file

diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index b80257a..6515ebc 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -29,31 +29,37 @@ This document describes the Linux kernel Makefiles.
 	   --- 4.4 Controlling compiler options for host programs
 	   --- 4.5 When host programs are actually built
 
-	=== 5 Kbuild clean infrastructure
-
-	=== 6 Architecture Makefiles
-	   --- 6.1 Set variables to tweak the build to the architecture
-	   --- 6.2 Add prerequisites to archheaders:
-	   --- 6.3 Add prerequisites to archprepare:
-	   --- 6.4 List directories to visit when descending
-	   --- 6.5 Architecture-specific boot images
-	   --- 6.6 Building non-kbuild targets
-	   --- 6.7 Commands useful for building a boot image
-	   --- 6.8 Custom kbuild commands
-	   --- 6.9 Preprocessing linker scripts
-	   --- 6.10 Generic header files
-	   --- 6.11 Post-link pass
-
-	=== 7 Kbuild syntax for exported headers
-		--- 7.1 no-export-headers
-		--- 7.2 generic-y
-		--- 7.3 generated-y
-		--- 7.4 mandatory-y
-
-	=== 8 Kbuild Variables
-	=== 9 Makefile language
-	=== 10 Credits
-	=== 11 TODO
+	=== 5 Userspace Program support
+	   --- 5.1 Simple Userspace Program
+	   --- 5.2 Composite Userspace Programs
+	   --- 5.3 Controlling compiler options for userspace programs
+	   --- 5.4 When userspace programs are actually built
+
+	=== 6 Kbuild clean infrastructure
+
+	=== 7 Architecture Makefiles
+	   --- 7.1 Set variables to tweak the build to the architecture
+	   --- 7.2 Add prerequisites to archheaders:
+	   --- 7.3 Add prerequisites to archprepare:
+	   --- 7.4 List directories to visit when descending
+	   --- 7.5 Architecture-specific boot images
+	   --- 7.6 Building non-kbuild targets
+	   --- 7.7 Commands useful for building a boot image
+	   --- 7.8 Custom kbuild commands
+	   --- 7.9 Preprocessing linker scripts
+	   --- 7.10 Generic header files
+	   --- 7.11 Post-link pass
+
+	=== 8 Kbuild syntax for exported headers
+		--- 8.1 no-export-headers
+		--- 8.2 generic-y
+		--- 8.3 generated-y
+		--- 8.4 mandatory-y
+
+	=== 9 Kbuild Variables
+	=== 10 Makefile language
+	=== 11 Credits
+	=== 12 TODO
 
 1 Overview
 ==========
@@ -732,7 +738,88 @@ Both possibilities are described in the following.
 	This will tell kbuild to build lxdialog even if not referenced in
 	any rule.
 
-5 Kbuild clean infrastructure
+5 Userspace Program support
+===========================
+
+Just like host programs, Kbuild also supports building userspace executables
+for the target architecture (i.e. the same architecture as you are building
+the kernel for).
+
+The syntax is quite similar. The difference is to use "userprogs" instead of
+"hostprogs".
+
+5.1 Simple Userspace Program
+----------------------------
+
+	The following line tells kbuild that the program bpf-direct shall be
+	built for the target architecture.
+
+	Example::
+
+		userprogs := bpf-direct
+
+	Kbuild assumes in the above example that bpf-direct is made from a
+	single C source file named bpf-direct.c located in the same directory
+	as the Makefile.
+
+5.2 Composite Userspace Programs
+--------------------------------
+
+	Userspace programs can be made up based on composite objects.
+	The syntax used to define composite objects for userspace programs is
+	similar to the syntax used for kernel objects.
+	$(<executable>-objs) lists all objects used to link the final
+	executable.
+
+	Example::
+
+		#samples/seccomp/Makefile
+		userprogs      := bpf-fancy
+		bpf-fancy-objs := bpf-fancy.o bpf-helper.o
+
+	Objects with extension .o are compiled from the corresponding .c
+	files. In the above example, bpf-fancy.c is compiled to bpf-fancy.o
+	and bpf-helper.c is compiled to bpf-helper.o.
+
+	Finally, the two .o files are linked to the executable, bpf-fancy.
+	Note: The syntax <executable>-y is not permitted for userspace programs.
+
+5.3 Controlling compiler options for userspace programs
+-------------------------------------------------------
+
+	When compiling userspace programs, it is possible to set specific flags.
+	The programs will always be compiled utilising $(CC) passed
+	the options specified in $(KBUILD_USERCFLAGS).
+	To set flags that will take effect for all userspace programs created
+	in that Makefile, use the variable userccflags.
+
+	Example::
+
+		# samples/seccomp/Makefile
+		userccflags += -I usr/include
+
+	To set specific flags for a single file the following construction
+	is used:
+
+	Example::
+
+		bpf-helper-userccflags += -I user/include
+
+	It is also possible to specify additional options to the linker.
+
+	Example::
+
+		# net/bpfilter/Makefile
+		bpfilter_umh-userldflags += -static
+
+	When linking bpfilter_umh, it will be passed the extra option -static.
+
+5.4 When userspace programs are actually built
+----------------------------------------------
+
+	Same as "When host programs are actually built".
+
+6 Kbuild clean infrastructure
 =============================
 
 "make clean" deletes most generated files in the obj tree where the kernel
@@ -790,7 +877,7 @@ is not operational at that point.
 Note 2: All directories listed in core-y, libs-y, drivers-y and net-y will
 be visited during "make clean".
 
-6 Architecture Makefiles
+7 Architecture Makefiles
 ========================
 
 The top level Makefile sets up the environment and does the preparation,
@@ -820,10 +907,10 @@ When kbuild executes, the following steps are followed (roughly):
    - Preparing initrd images and the like
 
 
-6.1 Set variables to tweak the build to the architecture
+7.1 Set variables to tweak the build to the architecture
 --------------------------------------------------------
 
-    LDFLAGS
+    KBUILD_LDFLAGS
 	Generic $(LD) options
 
 	Flags used for all invocations of the linker.
@@ -832,7 +919,7 @@ When kbuild executes, the following steps are followed (roughly):
 	Example::
 
 		#arch/s390/Makefile
-		LDFLAGS         := -m elf_s390
+		KBUILD_LDFLAGS         := -m elf_s390
 
 	Note: ldflags-y can be used to further customise
 	the flags used. See chapter 3.7.
@@ -967,7 +1054,7 @@ When kbuild executes, the following steps are followed (roughly):
 	KBUILD_VMLINUX_LIBS together specify all the object files used to
 	link vmlinux.
 
-6.2 Add prerequisites to archheaders
+7.2 Add prerequisites to archheaders
 ------------------------------------
 
 	The archheaders: rule is used to generate header files that
@@ -977,7 +1064,7 @@ When kbuild executes, the following steps are followed (roughly):
 	architecture itself.
 
 
-6.3 Add prerequisites to archprepare
+7.3 Add prerequisites to archprepare
 ------------------------------------
 
 	The archprepare: rule is used to list prerequisites that need to be
@@ -995,7 +1082,7 @@ When kbuild executes, the following steps are followed (roughly):
 	generating offset header files.
 
 
-6.4 List directories to visit when descending
+7.4 List directories to visit when descending
 ---------------------------------------------
 
 	An arch Makefile cooperates with the top Makefile to define variables
@@ -1030,7 +1117,7 @@ When kbuild executes, the following steps are followed (roughly):
 		drivers-$(CONFIG_OPROFILE)  += arch/sparc64/oprofile/
 
 
-6.5 Architecture-specific boot images
+7.5 Architecture-specific boot images
 -------------------------------------
 
 	An arch Makefile specifies goals that take the vmlinux file, compress
@@ -1085,7 +1172,7 @@ When kbuild executes, the following steps are followed (roughly):
 
 	When "make" is executed without arguments, bzImage will be built.
 
-6.6 Building non-kbuild targets
+7.6 Building non-kbuild targets
 -------------------------------
 
     extra-y
@@ -1108,7 +1195,7 @@ When kbuild executes, the following steps are followed (roughly):
 	In this example, extra-y is used to list object files that
 	shall be built, but shall not be linked as part of built-in.a.
 
-6.7 Commands useful for building a boot image
+7.7 Commands useful for building a boot image
 ---------------------------------------------
 
     Kbuild provides a few macros that are useful when building a
@@ -1211,7 +1298,7 @@ When kbuild executes, the following steps are followed (roughly):
 		targets += $(dtb-y)
 		DTC_FLAGS ?= -p 1024
 
-6.8 Custom kbuild commands
+7.8 Custom kbuild commands
 --------------------------
 
 	When kbuild is executing with KBUILD_VERBOSE=0, then only a shorthand
@@ -1241,7 +1328,7 @@ When kbuild executes, the following steps are followed (roughly):
 	will be displayed with "make KBUILD_VERBOSE=0".
 
 
-6.9 Preprocessing linker scripts
+7.9 Preprocessing linker scripts
 --------------------------------
 
 	When the vmlinux image is built, the linker script
@@ -1274,7 +1361,7 @@ When kbuild executes, the following steps are followed (roughly):
 	The kbuild infrastructure for `*lds` files is used in several
 	architecture-specific files.
 
-6.10 Generic header files
+7.10 Generic header files
 -------------------------
 
 	The directory include/asm-generic contains the header files
@@ -1283,7 +1370,7 @@ When kbuild executes, the following steps are followed (roughly):
 	to list the file in the Kbuild file.
 	See "7.2 generic-y" for further info on syntax etc.
 
-6.11 Post-link pass
+7.11 Post-link pass
 -------------------
 
 	If the file arch/xxx/Makefile.postlink exists, this makefile
@@ -1299,7 +1386,7 @@ When kbuild executes, the following steps are followed (roughly):
 	For example, powerpc uses this to check relocation sanity of
 	the linked vmlinux file.
 
-7 Kbuild syntax for exported headers
+8 Kbuild syntax for exported headers
 ------------------------------------
 
 The kernel includes a set of headers that is exported to userspace.
@@ -1319,14 +1406,14 @@ A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
 arch/<arch>/include/asm/ to list asm files coming from asm-generic.
 See subsequent chapter for the syntax of the Kbuild file.
 
-7.1 no-export-headers
+8.1 no-export-headers
 ---------------------
 
 	no-export-headers is essentially used by include/uapi/linux/Kbuild to
 	avoid exporting specific headers (e.g. kvm.h) on architectures that do
 	not support it. It should be avoided as much as possible.
 
-7.2 generic-y
+8.2 generic-y
 -------------
 
 	If an architecture uses a verbatim copy of a header from
@@ -1356,7 +1443,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 
 			#include <asm-generic/termios.h>
 
-7.3 generated-y
+8.3 generated-y
 ---------------
 
 	If an architecture generates other header files alongside generic-y
@@ -1370,7 +1457,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 			#arch/x86/include/asm/Kbuild
 			generated-y += syscalls_32.h
 
-7.4 mandatory-y
+8.4 mandatory-y
 ---------------
 
 	mandatory-y is essentially used by include/(uapi/)asm-generic/Kbuild
@@ -1380,7 +1467,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 	in arch/$(ARCH)/include/(uapi/)/asm, Kbuild will automatically generate
 	a wrapper of the asm-generic one.
 
-8 Kbuild Variables
+9 Kbuild Variables
 ==================
 
 The top Makefile exports the following variables:
@@ -1438,8 +1525,8 @@ The top Makefile exports the following variables:
 	command.
 
 
-9 Makefile language
-===================
+10 Makefile language
+====================
 
 The kernel Makefiles are designed to be run with GNU Make.  The Makefiles
 use only the documented features of GNU Make, but they do use many
@@ -1458,7 +1545,7 @@ time the left-hand side is used.
 There are some cases where "=" is appropriate.  Usually, though, ":="
 is the right choice.
 
-10 Credits
+11 Credits
 ==========
 
 - Original version made by Michael Elizabeth Chastain, <mailto:[email protected]>
@@ -1466,7 +1553,7 @@ is the right choice.
 - Updates by Sam Ravnborg <[email protected]>
 - Language QA by Jan Engelhardt <[email protected]>
 
-11 TODO
+12 TODO
 =======
 
 - Describe how kbuild supports shipped files with _shipped.

Documentation/kbuild/modules.rst

View file

diff --git a/Documentation/kbuild/modules.rst b/Documentation/kbuild/modules.rst
index e0b45a2..a45cccf 100644
--- a/Documentation/kbuild/modules.rst
+++ b/Documentation/kbuild/modules.rst
@@ -528,18 +528,6 @@ build.
 		will then do the expected and compile both modules with
 		full knowledge of symbols from either module.
 
-	Use an extra Module.symvers file
-		When an external module is built, a Module.symvers file
-		is generated containing all exported symbols which are
-		not defined in the kernel. To get access to symbols
-		from bar.ko, copy the Module.symvers file from the
-		compilation of bar.ko to the directory where foo.ko is
-		built. During the module build, kbuild will read the
-		Module.symvers file in the directory of the external
-		module, and when the build is finished, a new
-		Module.symvers file is created containing the sum of
-		all symbols defined and not part of the kernel.
-
 	Use "make" variable KBUILD_EXTRA_SYMBOLS
 		If it is impractical to add a top-level kbuild file,
 		you can assign a space separated list

Kconfig

View file

diff --git a/Kconfig b/Kconfig
index e10b3ee..745bc77 100644
--- a/Kconfig
+++ b/Kconfig
@@ -5,8 +5,6 @@
 #
 mainmenu "Linux/$(ARCH) $(KERNELVERSION) Kernel Configuration"
 
-comment "Compiler: $(CC_VERSION_TEXT)"
-
 source "scripts/Kconfig.include"
 
 source "init/Kconfig"

Makefile

View file

diff --git a/Makefile b/Makefile
index a7bc91c..839f9fe 100644
--- a/Makefile
+++ b/Makefile
@@ -11,9 +11,12 @@ NAME = Kleptomaniac Octopus
 # Comments in this file are targeted only to the developer, do not
 # expect to learn how to build the kernel reading this file.
 
+$(if $(filter __%, $(MAKECMDGOALS)), \
+	$(error targets prefixed with '__' are only for internal use))
+
 # That's our default target when none is given on the command line
-PHONY := _all
-_all:
+PHONY := __all
+__all:
 
 # We are using a recursive build, so we need to do a little thinking
 # to get the ordering right.
@@ -157,12 +160,14 @@ MAKEFLAGS += --include-dir=$(abs_srctree)
 need-sub-make := 1
 endif
 
+this-makefile := $(lastword $(MAKEFILE_LIST))
+
 ifneq ($(filter 3.%,$(MAKE_VERSION)),)
 # 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x
 # We need to invoke sub-make to avoid implicit rules in the top Makefile.
 need-sub-make := 1
 # Cancel implicit rules for this Makefile.
-$(lastword $(MAKEFILE_LIST)): ;
+$(this-makefile): ;
 endif
 
 export abs_srctree abs_objtree
@@ -170,13 +175,13 @@ export sub_make_done := 1
 
 ifeq ($(need-sub-make),1)
 
-PHONY += $(MAKECMDGOALS) sub-make
+PHONY += $(MAKECMDGOALS) __sub-make
 
-$(filter-out _all sub-make $(lastword $(MAKEFILE_LIST)), $(MAKECMDGOALS)) _all: sub-make
+$(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make
 	@:
 
 # Invoke a second make in the output directory, passing relevant variables
-sub-make:
+__sub-make:
 	$(Q)$(MAKE) -C $(abs_objtree) -f $(abs_srctree)/Makefile $(MAKECMDGOALS)
 
 endif # need-sub-make
@@ -213,6 +218,9 @@ ifeq ("$(origin M)", "command line")
   KBUILD_EXTMOD := $(M)
 endif
 
+$(if $(word 2, $(KBUILD_EXTMOD)), \
+	$(error building multiple external modules is not supported))
+
 export KBUILD_CHECKSRC KBUILD_EXTMOD
 
 extmod-prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)
@@ -321,7 +329,7 @@ ifdef mixed-build
 
 PHONY += $(MAKECMDGOALS) __build_one_by_one
 
-$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
+$(MAKECMDGOALS): __build_one_by_one
 	@:
 
 __build_one_by_one:
@@ -406,9 +414,12 @@ else
 HOSTCC	= gcc
 HOSTCXX	= g++
 endif
-KBUILD_HOSTCFLAGS   := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \
-		-fomit-frame-pointer -std=gnu89 $(HOST_LFS_CFLAGS) \
-		$(HOSTCFLAGS)
+
+export KBUILD_USERCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
+			      -O2 -fomit-frame-pointer -std=gnu89
+export KBUILD_USERLDFLAGS :=
+
+KBUILD_HOSTCFLAGS   := $(KBUILD_USERCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
 KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
 KBUILD_HOSTLDFLAGS  := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
 KBUILD_HOSTLDLIBS   := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
@@ -447,6 +458,26 @@ PYTHON		= python
 PYTHON3		= python3
 CHECK		= sparse
 BASH		= bash
+GZIP		= gzip
+BZIP2		= bzip2
+LZOP		= lzop
+LZMA		= lzma
+LZ4		= lz4c
+XZ		= xz
+
+# GZIP, BZIP2, LZOP env vars are used by the tools. Support them as the command
+# line interface, but use _GZIP, _BZIP2, _LZOP internally.
+_GZIP          := $(GZIP)
+_BZIP2         := $(BZIP2)
+_LZOP          := $(LZOP)
+
+# Reset GZIP, BZIP2, LZOP in this Makefile
+override GZIP=
+override BZIP2=
+override LZOP=
+
+# Reset GZIP, BZIP2, LZOP in recursive invocations
+MAKEOVERRIDES += GZIP= BZIP2= LZOP=
 
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 		  -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
@@ -495,6 +526,7 @@ CLANG_FLAGS :=
 export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
 export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL
 export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
+export _GZIP _BZIP2 _LZOP LZMA LZ4 XZ
 export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
 
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
@@ -593,12 +625,12 @@ else #!config-build
 # targets and others. In general all targets except *config targets.
 
 # If building an external module we do not care about the all: rule
-# but instead _all depend on modules
+# but instead __all depend on modules
 PHONY += all
 ifeq ($(KBUILD_EXTMOD),)
-_all: all
+__all: all
 else
-_all: modules
+__all: modules
 endif
 
 # Decide whether to build built-in, modular, or both.
@@ -608,19 +640,15 @@ KBUILD_MODULES :=
 KBUILD_BUILTIN := 1
 
 # If we have only "make modules", don't compile built-in objects.
-# When we're building modules with modversions, we need to consider
-# the built-in objects during the descend as well, in order to
-# make sure the checksums are up to date before we record them.
-
 ifeq ($(MAKECMDGOALS),modules)
-  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+  KBUILD_BUILTIN :=
 endif
 
 # If we have "make <whatever> modules", compile modules
 # in addition to whatever we do anyway.
 # Just "make" or "make all" shall build modules as well
 
-ifneq ($(filter all _all modules nsdeps,$(MAKECMDGOALS)),)
+ifneq ($(filter all modules nsdeps,$(MAKECMDGOALS)),)
   KBUILD_MODULES := 1
 endif
 
@@ -636,13 +664,11 @@ endif
 
 ifeq ($(KBUILD_EXTMOD),)
 # Objects we will link into vmlinux / subdirs we need to visit
-init-y		:= init/
+core-y		:= init/ usr/
 drivers-y	:= drivers/ sound/
 drivers-$(CONFIG_SAMPLES) += samples/
-net-y		:= net/
+drivers-y	+= net/ virt/
 libs-y		:= lib/
-core-y		:= usr/
-virt-y		:= virt/
 endif # KBUILD_EXTMOD
 
 # The all: target is the default when no target is given on the
@@ -695,7 +721,7 @@ $(KCONFIG_CONFIG):
 # This exploits the 'multi-target pattern rule' trick.
 # The syncconfig should be executed only once to make all the targets.
 # (Note: use the grouped target '&:' when we bump to GNU Make 4.3)